掌控 Solidity：事件日志、继承和接口的深度解析

标签：function sender uint256 projectId Solidity 接口 address 日志 public

Solidity 是以太坊智能合约的主要编程语言，它的强大之处在于能够帮助开发者构建安全、高效的去中心化应用。在我参与的多个项目中，事件日志、继承和接口这三个概念始终贯穿其中，成为构建复杂智能合约的关键技术。今天就来聊聊Solidity中的错误处理、事件日志、继承和接口。

Solidity中的错误处理

在 Solidity 中，错误处理是非常重要的，它可以帮助开发者捕获和处理合约执行过程中可能出现的问题，从而提高合约的健壮性和安全性。Solidity 提供了多种机制来处理错误，包括 require、assert、revert 和自定义错误。

require 语句

require 语句用于在条件不满足时抛出异常并回滚交易。通常用于验证输入参数和外部状态。

语法：

require(condition, "Error message");

示例：

function donate(uint256 projectId) public payable {
  require(projectId <= projectCount, "Invalid project ID");
  require(block.timestamp <= projects[projectId].deadline, "Project deadline has passed");
  require(msg.value > 0, "Donation amount must be greater than 0");

  // 其他逻辑
}

assert 语句

assert 语句用于在条件不满足时抛出异常并回滚交易。通常用于检测内部错误，例如不变量检查。

语法：

assert(condition);

示例：

function withdrawFunds(uint256 projectId) public {
  require(projectId <= projectCount, "Invalid project ID");
  require(projects[projectId].creator == msg.sender, "Only the project creator can withdraw funds");
  require(projects[projectId].isFunded, "Project is not funded");

  uint256 amountToWithdraw = projects[projectId].raisedAmount;
  projects[projectId].raisedAmount = 0;

  (bool success, ) = projects[projectId].creator.call{value: amountToWithdraw}("");
  assert(success); // 确保转账成功

  emit Funded(projectId, amountToWithdraw);
}

revert 语句

revert 语句用于显式地抛出异常并回滚交易。可以传递一个字符串作为错误消息。

语法：

revert("Error message");

示例：

function createProject(string memory title, string memory description, uint256 targetAmount, uint256 duration) public {
  if (targetAmount == 0) {
    revert("Target amount must be greater than 0");
  }
  if (duration == 0) {
    revert("Duration must be greater than 0");
  }

  projectCount++;
  uint256 deadline = block.timestamp + duration;
  projects[projectCount] = Project(msg.sender, title, description, targetAmount, 0, deadline, false);
  emit ProjectCreated(projectCount, msg.sender, title, targetAmount, deadline);
}

自定义错误

从 Solidity 0.8.0 版本开始，引入了自定义错误功能，可以提高错误处理的可读性和效率。

定义自定义错误：

error InvalidProjectId();
error DeadlinePassed();
error ZeroDonation();
error NotProjectCreator();
error NotFunded();

抛出自定义错误：

function donate(uint256 projectId) public payable {
  if (projectId > projectCount) {
    revert InvalidProjectId();
  }
  if (block.timestamp > projects[projectId].deadline) {
    revert DeadlinePassed();
  }
  if (msg.value == 0) {
    revert ZeroDonation();
  }

  projects[projectId].raisedAmount += msg.value;
  emit Donated(projectId, msg.sender, msg.value);

  if (projects[projectId].raisedAmount >= projects[projectId].targetAmount) {
    projects[projectId].isFunded = true;
    emit Funded(projectId, projects[projectId].raisedAmount);
  }
}

错误处理的最佳实践

明确错误消息：
使用清晰、具体的错误消息，帮助调试和理解问题。

避免冗余检查：
不要在多个地方重复相同的检查，尽量集中处理。

使用自定义错误：
自定义错误可以提高代码的可读性和可维护性，减少 gas 费用。

合理使用 assert 和 require：
assert 用于检测内部错误，require 用于验证外部输入和状态。

测试错误处理：
编写单元测试来验证错误处理逻辑是否正确。

示例合约

以下是一个完整的示例合约，展示了如何使用 require、assert、revert 和自定义错误：

pragma solidity ^0.8.0;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";

contract CrowdfundingPlatform is Ownable, ReentrancyGuard {
    struct Project {
        address creator;
        string title;
        string description;
        uint256 targetAmount;
        uint256 raisedAmount;
        uint256 deadline;
        bool isFunded;
    }

    mapping(uint256 => Project) public projects;
    uint256 public projectCount;

    event ProjectCreated(uint256 projectId, address creator, string title, uint256 targetAmount, uint256 deadline);
    event Donated(uint256 projectId, address donor, uint256 amount);
    event Funded(uint256 projectId, uint256 totalRaised);

    error InvalidProjectId();
    error DeadlinePassed();
    error ZeroDonation();
    error NotProjectCreator();
    error NotFunded();

    function createProject(string memory title, string memory description, uint256 targetAmount, uint256 duration) public {
        if (targetAmount == 0) {
            revert("Target amount must be greater than 0");
        }
        if (duration == 0) {
            revert("Duration must be greater than 0");
        }

        projectCount++;
        uint256 deadline = block.timestamp + duration;
        projects[projectCount] = Project(msg.sender, title, description, targetAmount, 0, deadline, false);
        emit ProjectCreated(projectCount, msg.sender, title, targetAmount, deadline);
    }

    function donate(uint256 projectId) public payable {
        if (projectId > projectCount) {
            revert InvalidProjectId();
        }
        if (block.timestamp > projects[projectId].deadline) {
            revert DeadlinePassed();
        }
        if (msg.value == 0) {
            revert ZeroDonation();
        }

        projects[projectId].raisedAmount += msg.value;
        emit Donated(projectId, msg.sender, msg.value);

        if (projects[projectId].raisedAmount >= projects[projectId].targetAmount) {
            projects[projectId].isFunded = true;
            emit Funded(projectId, projects[projectId].raisedAmount);
        }
    }

    function withdrawFunds(uint256 projectId) public nonReentrant {
        if (projectId > projectCount) {
            revert InvalidProjectId();
        }
        if (projects[projectId].creator != msg.sender) {
            revert NotProjectCreator();
        }
        if (!projects[projectId].isFunded) {
            revert NotFunded();
        }

        uint256 amountToWithdraw = projects[projectId].raisedAmount;
        projects[projectId].raisedAmount = 0;

        (bool success, ) = projects[projectId].creator.call{value: amountToWithdraw}("");
        assert(success); // 确保转账成功

        emit Funded(projectId, amountToWithdraw);
    }
}

Solidity中的事件和日志

什么是事件？

在 Solidity 中，事件是一种允许智能合约与外部世界进行通信的机制。通过触发事件，可以记录合约执行中的关键操作，并将这些操作发送到链上。事件的记录会以日志的形式存储在区块中，不会直接改变合约的状态。

为什么使用事件？

• 成本低：事件数据存储在日志中，比存储在合约状态中更便宜。
• 可检索：事件数据可以被链外应用轻松检索和解析。
• 异步通知：事件可以用于异步通知链外应用，实现实时更新。

定义和触发事件

定义事件
在 Solidity 中，事件的定义使用 event 关键字。事件可以带有参数，这些参数可以在触发事件时传递值。

event ProjectCreated(uint256 indexed projectId, address indexed creator, string title, uint256 targetAmount, uint256 deadline);
event Donated(uint256 indexed projectId, address indexed donor, uint256 amount);
event Funded(uint256 indexed projectId, uint256 totalRaised);

• indexed 关键字：标记参数为索引参数，可以在日志中快速查找。最多可以有三个索引参数。

触发事件
在合约方法中，使用 emit 关键字来触发事件。

function createProject(string memory title, string memory description, uint256 targetAmount, uint256 duration) public {
    projectCount++;
    uint256 deadline = block.timestamp + duration;
    projects[projectCount] = Project(msg.sender, title, description, targetAmount, 0, deadline, false);
    emit ProjectCreated(projectCount, msg.sender, title, targetAmount, deadline);
}

function donate(uint256 projectId) public payable {
    require(projectId <= projectCount, "Invalid project ID");
    require(block.timestamp <= projects[projectId].deadline, "Project deadline has passed");
    require(msg.value > 0, "Donation amount must be greater than 0");

    projects[projectId].raisedAmount += msg.value;
    emit Donated(projectId, msg.sender, msg.value);

    if (projects[projectId].raisedAmount >= projects[projectId].targetAmount) {
        projects[projectId].isFunded = true;
        emit Funded(projectId, projects[projectId].raisedAmount);
    }
}

监听和检索事件

监听事件
在链外应用中，可以使用 Web3.js 或其他以太坊客户端库来监听事件。

const projectCreatedEvent = crowdfundingPlatform.events.ProjectCreated();
projectCreatedEvent.on('data', (event) => {
    console.log(`Project created: ${event.returnValues.projectId}`);
});

const donatedEvent = crowdfundingPlatform.events.Donated();
donatedEvent.on('data', (event) => {
    console.log(`Donated to project ${event.returnValues.projectId}: ${event.returnValues.amount} wei`);
});

检索事件
可以通过过滤器来检索历史事件。

const filter = {
    fromBlock: 0,
    toBlock: 'latest'
};

crowdfundingPlatform.getPastEvents('ProjectCreated', filter, (error, events) => {
    if (error) {
        console.error(error);
    } else {
        console.log(events);
    }
});

实战经验分享

在我开发的一个众筹平台项目中，事件和日志发挥了重要作用。通过定义和触发事件，我能够记录每个项目的创建、捐款和资金到位的关键操作。这些事件不仅帮助我调试和优化合约，还为前端应用提供了实时更新的能力。

例如，在 createProject 方法中，我定义了一个 ProjectCreated 事件，每当有新项目创建时，都会触发这个事件。前端应用通过监听这个事件，可以实时显示新创建的项目列表。

event ProjectCreated(uint256 indexed projectId, address indexed creator, string title, uint256 targetAmount, uint256 deadline);

function createProject(string memory title, string memory description, uint256 targetAmount, uint256 duration) public {
    projectCount++;
    uint256 deadline = block.timestamp + duration;
    projects[projectCount] = Project(msg.sender, title, description, targetAmount, 0, deadline, false);
    emit ProjectCreated(projectCount, msg.sender, title, targetAmount, deadline);
}

Solidity中的继承和接口

随着项目的复杂度增加，我遇到了一个常见的问题：代码复用。在传统的面向对象编程语言中，我们可以通过继承和接口来实现代码复用和模块化设计。那么在 Solidity 中，如何实现这一点呢？

继承：代码复用的利器

什么是继承？
在 Solidity 中，继承是一种允许一个合约继承另一个合约的功能和属性的机制。通过继承，子合约可以重用父合约的代码，从而减少重复代码，提高代码的可维护性和可读性。

单继承
最简单的继承形式是单继承，即一个子合约只继承一个父合约。下面是一个简单的例子：

// 父合约
contract Base {
    uint256 public baseValue;

    constructor(uint256 _baseValue) {
        baseValue = _baseValue;
    }

    function baseFunction() public pure returns (string memory) {
        return "Base Function";
    }
}

// 子合约
contract Child is Base {
    uint256 public childValue;

    constructor(uint256 _baseValue, uint256 _childValue) Base(_baseValue) {
        childValue = _childValue;
    }

    function childFunction() public pure returns (string memory) {
        return "Child Function";
    }
}

在这个例子中，Child 合约继承了 Base 合约。Child 合约可以访问 Base 合约的 baseValue 变量和 baseFunction 方法。

多继承

Solidity 还支持多继承，即一个子合约可以继承多个父合约。多继承可以实现更复杂的代码复用和模块化设计。下面是一个多继承的例子：

// 父合约 1
contract Base1 {
    uint256 public value1;

    constructor(uint256 _value1) {
        value1 = _value1;
    }

    function function1() public pure returns (string memory) {
        return "Function 1";
    }
}

// 父合约 2
contract Base2 {
    uint256 public value2;

    constructor(uint256 _value2) {
        value2 = _value2;
    }

    function function2() public pure returns (string memory) {
        return "Function 2";
    }
}

// 子合约
contract Child is Base1, Base2 {
    uint256 public childValue;

    constructor(uint256 _value1, uint256 _value2, uint256 _childValue) Base1(_value1) Base2(_value2) {
        childValue = _childValue;
    }

    function childFunction() public pure returns (string memory) {
        return "Child Function";
    }
}

在这个例子中，Child 合约继承了 Base1 和 Base2 合约。Child 合约可以访问 Base1 和 Base2 合约的变量和方法。

构造函数的调用顺序
在多继承的情况下，构造函数的调用顺序非常重要。Solidity 会按照继承列表从右到左的顺序调用父合约的构造函数。如果父合约之间存在依赖关系，需要特别注意构造函数的调用顺序。

contract A {
    uint256 public a;

    constructor(uint256 _a) {
        a = _a;
    }
}

contract B {
    uint256 public b;

    constructor(uint256 _b) {
        b = _b;
    }
}

contract C is A, B {
    uint256 public c;

    constructor(uint256 _a, uint256 _b, uint256 _c) A(_a) B(_b) {
        c = _c;
    }
}

在这个例子中，C 合约的构造函数会先调用 B 合约的构造函数，再调用 A 合约的构造函数。

方法重写
在继承中，子合约可以重写父合约的方法。通过重写方法，子合约可以实现不同的功能或优化父合约的行为。下面是一个方法重写的例子：

contract Base {
    function baseFunction() public pure virtual returns (string memory) {
        return "Base Function";
    }
}

contract Child is Base {
    function baseFunction() public pure override returns (string memory) {
        return "Child Function";
    }
}

在这个例子中，Child 合约重写了 Base 合约的 baseFunction 方法。virtual 关键字表示该方法可以被子合约重写，override 关键字表示当前方法是在重写父合约的方法。

接口：定义行为规范

什么是接口？
接口是一种定义合约行为规范的方式。接口不包含任何实现，只包含方法签名、事件和常量。通过接口，可以确保合约实现特定的行为，而不关心具体的实现细节。

定义接口
在 Solidity 中，接口的定义使用 interface 关键字。接口中的方法必须是 external 类型，且不能包含任何实现。下面是一个简单的接口定义：

interface IERC20 {
    function totalSupply() external view returns (uint256);
    function balanceOf(address account) external view returns (uint256);
    function transfer(address recipient, uint256 amount) external returns (bool);
    function allowance(address owner, address spender) external view returns (uint256);
    function approve(address spender, uint256 amount) external returns (bool);
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

在这个例子中，IERC20 接口定义了 ERC20 标准中的方法和事件。

实现接口
合约可以通过 is 关键字实现接口，并提供接口中定义的方法的具体实现。下面是一个实现 IERC20 接口的合约示例：

contract MyToken is IERC20 {
    mapping(address => uint256) private _balances;
    mapping(address => mapping(address => uint256)) private _allowances;
    uint256 private _totalSupply;

    constructor(uint256 initialSupply) {
        _mint(msg.sender, initialSupply);
    }

    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    function allowance(address owner, address spender) public view override returns (uint256) {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(msg.sender, spender, amount);
        return true;
    }

    function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, msg.sender, _allowances[sender][msg.sender] - amount);
        return true;
    }

    function _transfer(address sender, address recipient, uint256 amount) internal {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        require(_balances[sender] >= amount, "ERC20: insufficient balance");

        _balances[sender] -= amount;
        _balances[recipient] += amount;
        emit Transfer(sender, recipient, amount);
    }

    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "ERC20: mint to the zero address");

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);
    }

    function _approve(address owner, address spender, uint256 amount) internal {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
}

在这个例子中，MyToken 合约实现了 IERC20 接口，并提供了所有方法的具体实现。

实战经验分享

在我的实际开发过程中，继承和接口发挥了重要作用。以下是一些具体的实战经验分享：

项目背景
我参与了一个去中心化金融（DeFi）项目，该项目需要实现多个不同类型的代币合约，包括标准的 ERC20 代币、可升级的代币、治理代币等。为了提高代码的可维护性和可扩展性，我们采用了继承和接口的设计模式。

使用继承实现代码复用
我们定义了一个基础的 Token 合约，包含了通用的代币逻辑，如转账、批准等。然后，我们通过继承 Token 合约，实现了不同类型的代币合约。

// 基础代币合约
contract Token {
    mapping(address => uint256) private _balances;
    mapping(address => mapping(address => uint256)) private _allowances;
    uint256 private _totalSupply;

    event Transfer(address indexed from, address indexed to, uint256 value);
    event Approval(address indexed owner, address indexed spender, uint256 value);

    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    function transfer(address recipient, uint256 amount) public returns (bool) {
        _transfer(msg.sender, recipient, amount);
        return true;
    }

    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount) public returns (bool) {
        _approve(msg.sender, spender, amount);
        return true;
    }

    function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, msg.sender, _allowances[sender][msg.sender] - amount);
        return true;
    }

    function _transfer(address sender, address recipient, uint256 amount) internal {
        require(sender != address(0), "Token: transfer from the zero address");
        require(recipient != address(0), "Token: transfer to the zero address");
        require(_balances[sender] >= amount, "Token: insufficient balance");

        _balances[sender] -= amount;
        _balances[recipient] += amount;
        emit Transfer(sender, recipient, amount);
    }

    function _mint(address account, uint256 amount) internal {
        require(account != address(0), "Token: mint to the zero address");

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);
    }

    function _approve(address owner, address spender, uint256 amount) internal {
        require(owner != address(0), "Token: approve from the zero address");
        require(spender != address(0), "Token: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
}

// 标准 ERC20 代币合约
contract StandardToken is Token {
    string public name;
    string public symbol;
    uint8 public decimals;

    constructor(string memory _name, string memory _symbol, uint8 _decimals, uint256 initialSupply) {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;
        _mint(msg.sender, initialSupply);
    }
}

// 可升级代币合约
contract UpgradableToken is StandardToken {
    address public owner;

    constructor(string memory _name, string memory _symbol, uint8 _decimals, uint256 initialSupply) StandardToken(_name, _symbol, _decimals, initialSupply) {
        owner = msg.sender;
    }

    function upgrade(address newContract) public {
        require(msg.sender == owner, "UpgradableToken: only owner can upgrade");
        // 实现升级逻辑
    }
}

// 治理代币合约
contract GovernanceToken is StandardToken {
    mapping(address => bool) public isGovernor;

    constructor(string memory _name, string memory _symbol, uint8 _decimals, uint256 initialSupply) StandardToken(_name, _symbol, _decimals, initialSupply) {
        isGovernor[msg.sender] = true;
    }

    function addGovernor(address governor) public {
        require(isGovernor[msg.sender], "GovernanceToken: only governors can add governors");
        isGovernor[governor] = true;
    }

    function removeGovernor(address governor) public {
        require(isGovernor[msg.sender], "GovernanceToken: only governors can remove governors");
        isGovernor[governor] = false;
    }
}

通过这种方式，我们避免了大量的代码重复，提高了代码的可维护性和可扩展性。

使用接口确保行为规范
在项目中，我们还定义了一些接口，确保各个合约实现特定的行为。例如，我们定义了一个 IGovernance 接口，确保治理代币合约实现特定的治理功能。

interface IGovernance {
    function addGovernor(address governor) external;
    function removeGovernor(address governor) external;
    function isGovernor(address account) external view returns (bool);
}

然后，我们在治理代币合约中实现了这个接口：

contract GovernanceToken is StandardToken, IGovernance {
    mapping(address => bool) public isGovernor;

    constructor(string memory _name, string memory _symbol, uint8 _decimals, uint256 initialSupply) StandardToken(_name, _symbol, _decimals, initialSupply) {
        isGovernor[msg.sender] = true;
    }

    function addGovernor(address governor) public override {
        require(isGovernor[msg.sender], "GovernanceToken: only governors can add governors");
        isGovernor[governor] = true;
    }

    function removeGovernor(address governor) public override {
        require(isGovernor[msg.sender], "GovernanceToken: only governors can remove governors");
        isGovernor[governor] = false;
    }

    function isGovernor(address account) public view override returns (bool) {
        return isGovernor[account];
    }
}

通过接口，我们确保了治理代币合约实现了特定的治理功能，提高了代码的规范性和一致性，https://t.me/gtokentool  。

标签：function,sender,uint256,projectId,Solidity,接口,address,日志,public
From： https://blog.csdn.net/2408_87746709/article/details/143854344