首页 > 其他分享 >实验7:基于REST API的SDN北向应用实践

实验7:基于REST API的SDN北向应用实践

时间:2022-10-25 23:00:15浏览次数:36  
标签:__ url self flow REST headers API SDN requests

一、基础要求

编写Python程序,调用OpenDaylight的北向接口实现以下功能
(1) 利用Mininet平台搭建下图所示网络拓扑,并连接OpenDaylight;

(2) 下发指令删除s1上的流表数据。

  • 代码delete.py

#!/usr/bin/python
import requests
from requests.auth import HTTPBasicAuth
if __name__ == "__main__":
    url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/'
    headers = {'Content-Type': 'application/json'}
    res = requests.delete(url, headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
    print (res.content)
  • 运行delete.py

(3) 下发硬超时流表,实现拓扑内主机h1和h3网络中断20s。

  • 创建并编写 hardtimeout.py 文件
# hardtimeout.py
import requests
from requests.auth import HTTPBasicAuth
if __name__ == "__main__":
    url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/1'
    with open("./hardtimeout.json") as file:
        str = file.read()
    headers = {'Content-Type': 'application/json'}
    res = requests.put(url, str, headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
    print (res.content)
  • 创建并编写 hardtimeout.json 文件

# hardtimeout.json
{
    "flow": [
      {
        "id": "1",
        "match": {
          "in-port": "1",
          "ethernet-match": {
            "ethernet-type": {
              "type": "0x0800"
            }
          },
          "ipv4-destination": "10.0.0.3/32"
        },
        "instructions": {
          "instruction": [
            {
              "order": "0",
              "apply-actions": {
                "action": [
                  {
                    "order": "0",
                    "drop-action": {}
                  }
                ]
              }
            }
          ]
        },
        "flow-name": "flow",
        "priority": "65535",
        "hard-timeout": "20",
        "cookie": "2",
        "table_id": "0"
      }
    ]
  }


(4) 获取s1上活动的流表数

  • 创建并编写 getflow.py 文件
# getflow.py
import requests
from requests.auth import HTTPBasicAuth
if __name__ == "__main__":
    url = 'http://127.0.0.1:8181/restconf/operational/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/opendaylight-flow-table-statistics:flow-table-statistics'
    headers = {'Content-Type': 'application/json'}
    res = requests.get(url,headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
    print (res.content)

  1. 编写Python程序,调用Ryu的北向接口实现以下功能
    (1) 实现上述OpenDaylight实验拓扑上相同的硬超时流表下发。
    创建并编写 ryu_timeout.py 文件
# ryu_timeout.py
import requests
if __name__ == "__main__":
    url = 'http://127.0.0.1:8080/stats/flowentry/add'
    with open("./ryu_timeout.json") as file:
        str = file.read()
    headers = {'Content-Type': 'application/json'}
    res = requests.post(url, str, headers=headers)
    print (res.content)
创建并编写 ryu_timeout.json 文件


# ryu_timeout.json
{
    "dpid": 1,
    "cookie": 1,
    "cookie_mask": 1,
    "table_id": 0,
    "hard_timeout": 20,
    "priority": 65535,
    "flags": 1,
    "match":{
        "in_port":1
    },
    "actions":[

    ]
 }


(2) 参考Ryu REST API的文档,基于VLAN实验的网络拓扑,编程实现相同的VLAN配置。
创建并编写 ryu_topo.py 文件

# ryu_topo.py
from mininet.topo import Topo

class MyTopo(Topo):
    def __init__(self):
        # initilaize topology
        Topo.__init__(self)

        self.addSwitch("s1")
        self.addSwitch("s2")

        self.addHost("h1")
        self.addHost("h2")
        self.addHost("h3")
        self.addHost("h4")

        self.addLink("s1", "h1")
        self.addLink("s1", "h2")
        self.addLink("s2", "h3")
        self.addLink("s2", "h4")
        self.addLink("s1", "s2")

topos = {'mytopo': (lambda: MyTopo())}

创建并编写 ryu_vlan.py 文件

# ryu_vlan.py
import json

import requests

if __name__ == "__main__":
    url = 'http://127.0.0.1:8080/stats/flowentry/add'
    headers = {'Content-Type': 'application/json'}
    flow1 = {
        "dpid": 1,
        "priority": 1,
        "match":{
            "in_port": 1
        },
        "actions":[
            {
                "type": "PUSH_VLAN",    
                "ethertype": 33024      
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid",    
                "value": 4096           
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow2 = {
        "dpid": 1,
        "priority": 1,
        "match":{
            "in_port": 2
        },
        "actions":[
            {
                "type": "PUSH_VLAN",     
                "ethertype": 33024      
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid",     
                "value": 4097           
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow3 = {
        "dpid": 1,
        "priority": 1,
        "match":{
            "vlan_vid": 0
        },
        "actions":[
            {
                "type": "POP_VLAN",    
                "ethertype": 33024     
            },
            {
                "type": "OUTPUT",
                "port": 1
            }
        ]
    }
    flow4 = {
        "dpid": 1,
        "priority": 1,
        "match": {
            "vlan_vid": 1
        },
        "actions": [
            {
                "type": "POP_VLAN", 
                "ethertype": 33024  
            },
            {
                "type": "OUTPUT",
                "port": 2
            }
        ]
    }
    flow5 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "in_port": 1
        },
        "actions": [
            {
                "type": "PUSH_VLAN", 
                "ethertype": 33024 
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid", 
                "value": 4096  
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow6 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "in_port": 2
        },
        "actions": [
            {
                "type": "PUSH_VLAN",  
                "ethertype": 33024  
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid",  
                "value": 4097 
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow7 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "vlan_vid": 0
        },
        "actions": [
            {
                "type": "POP_VLAN", 
                "ethertype": 33024  
            },
            {
                "type": "OUTPUT",
                "port": 1
            }
        ]
    }
    flow8 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "vlan_vid": 1
        },
        "actions": [
            {
                "type": "POP_VLAN", 
                "ethertype": 33024  
            },
            {
                "type": "OUTPUT",
                "port": 2
            }
        ]
    }
    res1 = requests.post(url, json.dumps(flow1), headers=headers)
    res2 = requests.post(url, json.dumps(flow2), headers=headers)
    res3 = requests.post(url, json.dumps(flow3), headers=headers)
    res4 = requests.post(url, json.dumps(flow4), headers=headers)
    res5 = requests.post(url, json.dumps(flow5), headers=headers)
    res6 = requests.post(url, json.dumps(flow6), headers=headers)
    res7 = requests.post(url, json.dumps(flow7), headers=headers)
    res8 = requests.post(url, json.dumps(flow8), headers=headers)

(二)进阶要求

OpenDaylight或Ryu任选其一,编程实现查看前序VLAN实验拓扑中所有节点(含交换机、主机)的名称,以及显示每台交换机的所有流表项。
创建并编写 getall.py 文件

# getall.py
import requests
import time
import re


class GetNodes:
    def __init__(self, ip):
        self.ip = ip
        
    def get_switch_id(self):
        url = 'http://' + self.ip + '/stats/switches'
        re_switch_id = requests.get(url=url).json()
        switch_id_hex = []
        for i in re_switch_id:
            switch_id_hex.append(hex(i))

        return switch_id_hex

    def getflow(self):
        url = 'http://' + self.ip + '/stats/flow/%d'
        switch_list = self.get_switch_id()
        ret_flow = []
        for switch in switch_list:
            new_url = format(url % int(switch, 16))
            re_switch_flow = requests.get(url=new_url).json()
            ret_flow.append(re_switch_flow)
        return ret_flow

    def show(self):
        flow_list = self.getflow()
        for flow in flow_list:
            for dpid in flow.keys():
                dp_id = dpid
                switchnum= '{1}'.format(hex(int(dp_id)), int(dp_id))        
                print('s'+switchnum,end = " ")
                switchnum = int(switchnum)
            for list_table in flow.values():
                for table in list_table:          
                    string1 = str(table)
                    if re.search("'dl_vlan': '(.*?)'", string1) is not None:
                       num = re.search("'dl_vlan': '(.*?)'", string1).group(1);
                       if num == '0' and switchnum == 1:
                          print('h1',end = " ")
                       if num == '1' and switchnum == 1:
                          print('h2',end = " ")
                       if num == '0' and switchnum == 2:
                          print('h3',end = " ")
                       if num == '1' and switchnum == 2:
                          print('h4',end = " ")
        print("")
        flow_list = self.getflow()
        for flow in flow_list:
            for dpid in flow.keys():
                dp_id = dpid
                print('switch_name:s{1}'.format(hex(int(dp_id)), int(dp_id)))
            for list_table in flow.values():
                for table in list_table:
                    print(table)
s1 = GetNodes("127.0.0.1:8080")
s1.show()

个人总结

1.我认为这次的实验难度较大,因为这次实验把之前的OpenDaylight和Ryu等综合起来,在删除流表时遇到困难,会发生报错,百度搜查资料后发现,时未安装curl,需要在终端通过输入sudo apt install curl命令安装,解决了此问题。
2.在基于VLAN实验的网络拓扑,编程实现相同的VLAN配置时,首先要先运行Ryuryu-manager ryu.app.simple_switch_13 ryu.app.ofctl_rest再构建自己用代码建立的拓扑,这样pingall才能成功
3.通过本次实验,我复习到了之前所有学习过的知识,例如VLAN的设置、硬超时的设置等,也学习到了新的知识,学会了调用OpenDaylight REST API实现特定网络功能和调用Ryu REST API实现特定网络功能。

标签:__,url,self,flow,REST,headers,API,SDN,requests
From: https://www.cnblogs.com/white0622/p/16826712.html

相关文章

  • 实验7:基于REST API的SDN北向应用实践
    一、基本要求1、编写Python程序,调用OpenDaylight的北向接口实现以下功能下发指令删除s1上的流表数据。delete.py#!/usr/bin/pythonimportrequestsfromrequests.a......
  • 实验7:基于REST API的SDN北向应用实践
    (一)基础要求1.编写Python程序,调用OpenDaylight的北向接口实现以下功能(1)利用Mininet平台搭建下图所示网络拓扑,并连接OpenDaylight;sudomn--topo=single,3--mac--cont......
  • 实验7:基于REST API的SDN北向应用实践
    一、实验目的1.能够编写程序调用OpenDaylightRESTAPI实现特定网络功能;2.能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境1.下载虚拟机软件OracleVisua......
  • 实验7:基于REST API的SDN北向应用实践
    (一)基本要求1.编写Python程序,调用OpenDaylight的北向接口实现以下功能(1) 利用Mininet平台搭建下图所示网络拓扑,并连接OpenDaylight(2) 下发指令删除s1上的流表数据。delet......
  • 数据工程师吐槽:数据API开发遭遇的那些烦心事
    数据工程师在岗位设置上位于业务端的上游和数据科学家的下游,在岗位职能上负责根据业务需求开发稳定可靠的数据服务API,通过API的方式交付给业务端使用。所以,很多时候数据开......
  • 实验7:基于REST API的SDN北向应用实践
    一、实验目的1.能够编写程序调用OpenDaylightRESTAPI实现特定网络功能;2.能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境1.下载虚拟机软件OracleVisua......
  • 实验7:基于REST API的SDN北向应用实践
    目录基础要求编写Python程序,调用OpenDaylight的北向接口实现以下功能:(1)利用Mininet平台搭建下图所示网络拓扑,并连接OpenDaylight;(2)下发指令删除s1上的流表数据。(3)下发硬......
  • 实验7:基于REST API的SDN北向应用实践
    一、实验目的1.能够编写程序调用OpenDaylightRESTAPI实现特定网络功能;2.能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境1.下载虚拟机软件OracleVisua......
  • 实验7:基于REST API的SDN北向应用实践
    实验7:基于RESTAPI的SDN北向应用实践一、实验目的1.下载虚拟机软件OracleVisualBox或VMware;2.在虚拟机中安装Ubuntu20.04Desktopamd64,并完整安装Mininet、OpenDayli......
  • rest_framework权限源码分析
    位置APIView---->dispatch方法---->initial方法--->self.check_permissions(request)(APIView的对象方法)分析defcheck_permissions(self,request):"""Chec......