Android Qcom USB Driver学习(九)

本章主要是基于之前的学习，实现一个hidraw的驱动，发现有两种用于识别usb设备的方式，放别是usb_device_id和hid_device_id

hid_probe

(1)hid_device_id

kernel/msm-4.19/drivers/hid/usbhid/hid-core.c
bus = usb usb_register  注册驱动        -> sys/bus/usb/driver

↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓

kernel/msm-4.19/drivers/hid/hid-core.c
bus = hid  hid_register_driver 注册驱动  -> sys/bus/hid/driver

hid bus本身没有探测的能力，都是需要其他模块来进行hid_add_device，

(2)usb_device_id

kernel/msm-4.19/drivers/hid/usbhid/usbmouse.c  
static const struct usb_device_id usb_mouse_id_table[] = {
    USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT,
                USB_INTERFACE_PROTOCOL_MOUSE)

usb探测的过程如下

usb_new_device -> usb_enumerate_device + announce_device + device_add -> bus_probe_device -> device_initial_probe 

	-> driver_match_device -> usb_device_match (driver.c)-> usb_match_id  (usb_device_id usbmouse.c)				   
	-> driver_probe_device ->  really_probe -> usb_mouse_probe -> input_register_device(usbmouse.c)
											-> usbhid_probe (usbhid/hid-core.c)-> hid_add_device -> device_add
											
		-> driver_match_device ->  hid_bus_match (hid/hid-core.c) -> hid_match_id   (hid_device_id hid-generic.c)	
		-> driver_probe_device ->   hid_device_probe(hid/hid-core.c) -> hid_generic_probe (hid/hid-generic.c)

issues

E hidraw 0003: 0C2E:1007.0001: device has no listeners, quitting
.raw_event =     hidraw_raw_event, //hidwar必须要实现这个函数

CONFIG_HIDRAW=y //需要打开这个函数，不然会调用hidraw.h中的空函数

hidraw_demo

在android的源码中没有只有hidraw的驱动，只有一些定义在hidraw.c中的api, 通过这些参数实现了hidraw接口的功能并测试通过

/* Copyright (c) 2014-2014, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/hid.h>
#include <linux/hid-debug.h>
#include "hid-ids.h"
#include "usbhid/usbhid.h"
#include <linux/usb.h>
#include <linux/vmalloc.h>
#include <linux/completion.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/cdev.h>
#include <linux/poll.h>
#include <linux/device.h>
#include <linux/major.h>
#include <linux/slab.h>
#include <linux/hid.h>
#include <linux/mutex.h>
#include <linux/sched.h>
#include <linux/sched/signal.h>
#include <linux/hidraw.h>

#define hidtype 0//1:use clamied , 0: use connect_mask

struct hidraw_data {
	struct hid_device *hdev;
};

static int hidraw_raw_event(struct hid_device *hdev,
		struct hid_report *report, u8 *raw_data, int size)
{
	struct hidraw_data *data = hid_get_drvdata(hdev);
	int ret = 0;
	if (!data)
		return 1;

	hidraw_report_event(hdev, raw_data, size);
	return ret;
}
#ifdef CONFIG_PM
static int hidraw_suspend(struct hid_device *hdev, pm_message_t message)
{

	return 0;
}
static int hidraw_resume(struct hid_device *hdev)
{
	return 0;
}
static int hidraw_reset_resume(struct hid_device *hdev)
{
	return 0;
}
#endif

static int hidraw_probe(struct hid_device *hdev,
		     const struct hid_device_id *id)
{
	struct hidraw_data *data;
	int error = -ENOMEM;
	struct usbhid_device *usbhid = hdev->driver_data;

	if(usbhid->ifnum != 0) {
		hid_err(hdev, "usbhid ifnum = %d\n", usbhid->ifnum);
		return error;
	}

	//hidraw_init();

	data = kzalloc(sizeof(struct hidraw_data), GFP_KERNEL);
	if (data == NULL) {
		hid_err(hdev, "failed to kzallocc \n");
		error = -ENOMEM;
		goto err_kzalloc;
	}

	data->hdev = hdev;

	hid_set_drvdata(hdev, data);
	error = hid_parse(hdev);
	if (error) {
		hid_err(hdev, "failed to parse \n");
		goto err_kzalloc;
	}

	hdev->quirks = HID_QUIRK_NO_INIT_REPORTS;
#if hidtype
	hdev->claimed = HID_CLAIMED_HIDRAW;
	error = hid_hw_start(hdev, 0);
#else
	error = hid_hw_start(hdev, HID_CONNECT_HIDRAW );
#endif
	if (error) {
		hid_err(hdev, "failed to hw start\n");
		goto err_drvdata_null;
	}
#if hidtype
	hidraw_connect(hdev);
#endif
	return 0;

err_kzalloc:
	kfree(data);
err_drvdata_null:
	hid_set_drvdata(hdev, NULL);
	return error;

}

static void hidraw_remove(struct hid_device *hdev)
{
	struct hidraw_data *data = hid_get_drvdata(hdev);

	hid_hw_stop(hdev);
#if hidtype
	hidraw_disconnect(hdev);
#endif
	hid_set_drvdata(hdev, NULL);

	//hidraw_exit();
	kfree(data);
}

static const struct hid_device_id hidraw_devices[] = {
	{ HID_USB_DEVICE(USB_VENDOR_ID_xxx, USB_DEVICE_ID_xxx) },
	{ }
};
MODULE_DEVICE_TABLE(hid, hidraw_devices);

static struct hid_driver hidraw_driver = {
	.name =          "hid-own",
	.id_table =      hidraw_devices,
	.probe =         hidraw_probe,
	.remove =        hidraw_remove,
	.raw_event =     hidraw_raw_event,
#ifdef CONFIG_PM
	.suspend =       hidraw_suspend,
	.resume =        hidraw_resume,
	.reset_resume =  hidraw_reset_resume,
#endif
};


//module_hid_driver(hidraw_driver);

static int __init hidown_init(void)
{
	int result;
	hidraw_init();

	result = hid_register_driver(&hidraw_driver);	
	return result;

}

static void __exit hidown_exit(void)
{
	hid_unregister_driver(&hidraw_driver);
	hidraw_exit();
}

module_init(hidown_init);
module_exit(hidown_exit);

MODULE_DESCRIPTION("Hid Raw Demo");
MODULE_LICENSE("GPL v2");