CMT206人力中心计算

Cardiff School of Computer Science and Informatics
Coursework Assessment Pro-forma
Module Code: CMT206
Module Title: Human Centric Computing
Assessment Title: Evaluation And Analysis Of Interface Design
Assessment Number: 1
Date Set: Tuesday 31 January 2023
Submission Date and Time:
Q2: by Friday 10 March 2023 at 9:30am (Week 6)
Q3: by Friday 28 April 2023 at 9:30am (Week 10)
Q1: by Friday 19 May 2023 at 9:30am (Week 13)
Feedback return date:
Q2: 7 April 2023
Q3: 26 May 2023
Q1: 16 June 20223
Extenuating Circumstances submission deadline will be 2 weeks after the submission
date above
Extenuating Circumstances marks and feedback return will be 2 weeks after the
feedback return date above
This assignment is worth 100% (Q1: 33%, Q2: 33%, Q3:34%) of the total marks available
for this module. If coursework is submitted late (and where there are no extenuating
circumstances):
1 If the assessment is submitted no later than 24 hours after the
deadline, the mark for the assessment will be capped at the minimum
pass mark;
2 If the assessment is submitted more than 24 hours after the deadline, a
mark of 0 will be given for the assessment.
Extensions to the coursework submission date can only be requested using the
Extenuating Circumstances procedure. Only students with approved extenuating
circumstances may use the extenuating circumstances submission deadline. Any
coursework submitted after the initial submission deadline without *approved*
extenuating circumstances will be treated as late.
More information on the extenuating circumstances procedure can be found on the
Intranet: https://intranet.cardiff.ac.uk/students/study/exams-andassessment/extenuating-circumstances
By submitting this assignment you are accepting the terms of the following declaration:

I hereby declare that my submission (or my contribution to it in the case of group
submissions) is all my own 代写CMT206程序 work, that it has not previously been submitted for
assessment and that I have not knowingly allowed it to be copied by another student. I
understand that deceiving or attempting to deceive examiners by passing off the work of
another writer, as one’s own is plagiarism. I also understand that plagiarising another’s
work or knowingly allowing another student to plagiarise from my work is against the
University regulations and that doing so will result in loss of marks and possible
disciplinary proceedings1.
1 https://intranet.cardiff.ac.uk/students/study/exams-and-assessment/academic-integrity/cheating-andacademic-misconduct
Assignment
Q1
Consider the Automatic Replies function in the Microsoft Outlook application, as shown in
the figure below. This is a function that allows users to set automatic replies to emails. For
example, if the user is on holiday, he could set up an automatic reply message to say that he
will not read emails until he returns from holiday.
The function is limited in how time is specified- it only allows the specification of one
continuous time frame, between a start time and end time, as shown in the picture.
A user may wish to post these replies on specific dates or on specific days of the week for a
certain period, or even on specific hours of working days, etc. This is currently not possible!
Instructions
Part 1: Task Analysis
(This task is worth 10 marks/20)
Redesign the Automatic Replies window to allow the user to specify an auto reply message
for weekdays and a message for weekends. (This task will be referred to as “set regular
week” use case)
• For weekdays, the automatic reply message will be active between 5:30 pm and
8:00am and should read “I am out of the office- working hours are between 8:00 and
5:30 Monday-Friday”.
• For weekends, the automatic reply message should read “I don’t work on weekendsworking hours are between 8:00 and 5:30 Monday-Friday”.
a) Produce a sketch of the redesigned window to fulfil the “set regular week” use casehand-drawn or a digital sketch is acceptable. Clearly annotate the design to explain
and justify the interface controls and features used in your design.
(7 marks: 4 marks for the design and 3 marks for the annotation/description)
b) Produce a State Transition Network (STN) to describe the interaction flow for the
basic flow scenario only of this use case.
(3 marks)
Note:
An interface state changes when an event occurs. For example, an entry of text in a text
field, a click of a button, etc. Your STN needs to depict all possible states and user actions
between states in the use case scenario.
Note: Your use case can assume that the user has Outlook opened successfully.
Part 2: Heuristic Evaluation
(This task is worth 10 marks/20)
Do a heuristic evaluation of the individual states of the interface that you identified in
the STN in part 1 above and identify all usability-related features and issues.
Report on usability in an objective manner and in a standard format using the template
(Excel spreadsheet) provided and discussed in the lectures. Your report should include,
a. the usability problems you identified with some justification of the severity score
assigned to the problems and your suggestions for addressing the issues you
identified in subsequent revisions of the interface, and
(5 marks)
b. the good design features that should be maintained in any subsequent revision of
the application.
(5 marks)
Report guidelines:
You need to use the HE spreadsheet template provided. Use one sheet in the spreadsheet
for every screen/state that you identified in the STN of part1 (b).
Learning Outcomes Assessed

This assignment assesses the Learning outcomes 1-2 as stated in the module
description.
Criteria for assessment
Credit will be awarded against the following criteria.
Component
&
Contribution
Fail < 50% Pass (50-59%) Merit(60-69%) Distinction >= 70%
Q1 Part 1(a)
(7 marks)
Design is
missing
substantial
parts of
states and
actions.
Poor
presentation
of report
with little
justification
of design
choices.
Design partially
satisfies the use
case, and some
interface states
and user actions
are missing.
Good/acceptable
report/annotations
that describes the
interface features
and components.
Sketchy
justification of
interface design
features is made.
Design completely
satisfies the use
case.
Very good
report/annotations
that gives a full
description of
interface features
and components.
All interface states
and possible user
actions are
presented.
Some justification
of interface design
features is made.
Design completely
satisfies the use case.
Excellent
report/annotations
that gives a full
description of
interface features
and components.
All interface states
and possible user
actions are
presented.
Convincing
justification of
interface design
features is made by
reference to usability
guidelines,
application design
patterns, feedback
and error,
information
organizations, etc.
Q1 Part 1(b)
(3 marks)
STNs are
missing or do
not relate to
use case
scenario.
Or STN
format is
wrong, e.g.
describing a
STN includes part of
the possible states
and user actions, but
some states/actions
are missing.
Correct format of
STN is adopted.
STN includes all
possible states of
the interface.
User actions are
mostly included, but
some may be
missing
STN includes all
possible states of the
interface.
User actions are clear
and completely
describe the transition
needed between states.
data
flowchart or
activity
diagram.
Correct format of
STN is adopted.
STN accounts for all
steps of the use case
scenario from start to
end.
Q1 Part 2
(10 marks)
HE misses
most of the
usability
issues, is not
consistently
or
exhaustively
applied.
Mention of
good
usability
features is
patchy across
all interface
states.
HE considers the
usability of some
aspects of the
considered states,
but there are
obvious omissions of
major usability
issues.
Usability problems
are recorded in an
adequate but
sometimes
inconsistent format.
Mention of good
usability features is
patchy across the
interface.
HE considers the
usability of most
aspects of the
considered states.
Usability problems
are recorded in a
consistent format.
Good usability
features are
explored, but not
exhaustively
reported.
HE considers the
usability of all aspects
(selection of interface
components, layout,
error handling,
feedback, etc.) of the
considered states.
Usability problems are
recorded in a consistent
format and is complete,
including, severity
rating and possible
solutions.
Good usability features
are explored fully and
documented
appropriately.
Feedback and suggestion for future learning
Feedback on your coursework will address the above criteria. Individual feedback and marks
will be returned to you via Learning Central by the date stated on the front page of this
document.
Feedback from this assignment will be useful for your dissertation.
Q2
This question is divided into two parts. Parts I and II are completed individually. Part I
requires you to plan an experiment choosing from one of 3 problems. Part II involves
reporting and reflecting on your experience.
Part I: Experiment Design and Conduct
You are tasked with designing an experiment. Pick ONE of the following problems:
• Design an experiment to assess the impact of keyboard and touch screen-based text
entry on text input speed.
• Design a study to compare the usability of TWO different ecommerce user interfaces
for browsing and choosing fashion products.
• Design a study to compare player experience between any TWO games of your
choice.
It is your responsibility to design the experiment. You must carefully plan out your
experiment and choose appropriate and applicable research methods. Key considerations
you must make are: 1) what variables to manipulate and measure, 2) which instrument
(e.g., questionnaire) is appropriate, 3) if a between or within groups design is appropriate,
and 4) what confounding factors might design decisions introduce and how to mitigate
them. NB: You must NOT conduct your experiment with any participants and/or collect data
in any way. Doing so without prior ethical approval will result in a breach of the university’s
ethics policy for human research: https://intranet.cardiff.ac.uk/staff/supporting-yourwork/research-support/research-integrity-and-governance/research-ethics
Part II: The Report
Write a reflective report. You should detail your experiment design with appropriate critical
reflection. When writing your report, you MUST address the following questions as stated in
the template document. The marking scheme is as included in parentheses:
1. What is your null hypothesis and alternative hypothesis? (2 marks)
2. What are your IV(s) and what are your DV(s)? (2 marks)
3. Give a detailed description of your experiment design. This should include clear
indication of your instrument (e.g., questionnaire) and all other information relevant
to reproduce your experiment. You must justify all decisions in your design. (6
marks)
4. Give a step-by-step description of your experiment procedure. (6 marks)
5. Reflect on your experiment design and the experience of completing this
coursework. You should address what you learned and what you may do differently
next time. Make sure it is clear to the reader what you learned from the process of
designing and conducting human centred experiments. (4 marks)
You should use the criteria for assessment (see Table 5) as a set of guidelines for your
writing.
Submission Instructions
• Individual Report: You must submit an individual report via Learning Central by the
submission date and time (max 400 words). You MUST use the template (.md)
document provided to write your report. Do NOT change the filename or file
extension (.md) of this file. This is important: any deviation from this may result in a
mark of 0 for your coursework. You may include up to 3 figures and graphs in your
report (keep these limited and relevant). When submitting, bundle your report text
document with any images for figures and the school’s cover sheet.
Learning Outcomes Assessed

This assignment assesses the Learning outcomes 3-4 as stated in the module
description.
Criteria for assessment
The marking scheme is as follows (percentage weights in brackets parentheses):
• Report (80%):
o A clear description of the experiment, including the IVs, DVs, and
questionnaire: 4 marks.
o Reflective reporting on the experiment design, justifying all decisions made
by reasoned argument and/or evidence: 6 marks.
• Report (20%):
o Reflective reporting demonstrating appreciation of the experience: 10 marks.
Credit will be awarded against the criteria shown in Table 5.
Table 5: Assessment criteria
Fail 3
rd (40%-49%) 2.2 (50%-59%) 2.1 (60%-69%) 1
st (70%+)
Report is
incomplete,
incoherent, and
lacking minimum
requirements
The report
contains some
detail, but not
enough to
reproduce the
experiment or it
is unclear what
was learned. It
illustrates a lack
of critical
reflection.
The report
contains enough
detail to
reproduce the
experiment
procedure yet is
lacking in depth
to convey
understanding
and appreciation
of the work
done. It
illustrates some
critical reflection.
The report is of a
medium quality,
containing
enough detail to
reproduce the
experiment
procedure
approximately,
with discussion
showing
understanding
and appreciation
of the work
done. It
illustrates good
critical reflection.
The report is of a
high quality,
containing detail
to reproduce the
experiment
procedure
exactly, with
discussion
showing
understanding
and appreciation
of the work
done. It
illustrates
excellent critical
reflection
including
discussion of the
limitations of the
experiment
including its
design.
Feedback and potential impact on future learning
Feedback on your coursework will address the above criteria. Individual feedback and marks
will be returned to you via Learning Central by the date stated on the front page of this
document.
Feedback from this assignment will be useful for your dissertation.
Q3
You are asked to conduct a statistical analysis of a dataset resulted from a user study. You
are asked to present your study and findings in the form of a report.
Assessment
type
Max. mark Max. length Format
Report 20 2 Pages .pdf
Your report will be assessed according to how well you are able to
• describe the dataset and research objectives, (4 marks)
• analyse the data and interpret the results of data analysis, and (8 marks)
• visualise the results of data analysis. (8 marks)
You should carry out a statistical analysis of the dataset to determine what the data tells
you about the user study and should visualise your results of data analysis in a way that
allows a reader to understand the findings of your study. You are free to use any software
package to conduct you study and generate visualisations.
1. The dataset
A user study was conducted to investigate the difference in display quality between two
different smartphones (i.e., referred to as S1 and S2). Also, the impact of gender on the
comparison between these two smartphones should be investigated. A number of
participants were recruited to assess the smartphones. Display quality was measured with
questionnaires, using the following method: each participant was asked to rate some
images displayed on S1 and some images displayed on S2, using a scale ranged from 0 (poor
quality) to 100 (excellent quality). The dataset is available on Learning Central as a Microsoft
Excel file. You should base your study entirely on the dataset provided.
2. The report
The report is limited to a maximum of TWO A4 pages including figures and tables. Arial font
size 11, with justification, should be used with Single line spacing throughout.
IMPORTANT! Any deviation from the instructions above will result in a deduction of 10% of
the maximum mark obtainable for the assessment. If you submit more than two pages as
instructed above, then ONLY THE FIRST TWO PAGES of the submission will be marked.
Extra submissions will be ignored.
IMPORTANT! Submission is via Learning Central. Submit your report as a single .pdf file –
NO other attachments or files should be included.
You should write a clear and concise report. Your writing should be brief and to the point. A
suggested structure for your report is shown below.
• Introduction: should provide a brief description of the dataset. You should clearly
state the research objectives.
• Data analysis: should consist of one or more sub-sections on a statistical analysis of
the data. You should formulate your research questions, describe the methods and
procedure of statistical tests and discuss the results of these tests. The titles of
these sub-sections should reflect what the sections contain.
• Data visualisation: should consist of ONE or TWO visualisations on the results of the
statistical data analysis. You should include accurate and informative axis labels and
titles. The captions should provide sufficient information to the readers without
referring to the related text in the report.
• [References are not required for the report.]
Learning Outcomes Assessed

This assignment assesses the Learning outcomes 5-6 as stated in the module
description.
Criteria for assessment
Credit will be awarded against the following criteria.
Level Fail (0-49%) Pass (50-59%) Merit (60-69%) Distinction (70-
100%)
Description of
dataset and
research aims (4
marks)
No/poor
description of
context of
dataset.
No/poor
description of
research aims.
Context of
dataset and
research aims
described well.
Narrative is
sometimes
unclear.
Context of
dataset and
research aims
documented
well.
Narrative is clear
and coherent.
Context of
dataset and
research aims
thoroughly (with
cogent
justification)
documented.
Narrative is clear,
coherent, and
refined. A high
standard of
writing is
maintained
throughout.
Data analysis and
interpretation of
results (8 marks)
No/basic analysis
of data.
Data analysis
does not produce
meaningful
solutions for the
research aims.
Statistical
methods applied
correctly for the
most part.
Results
interpreted
correctly for the
most part.
Statistical
methods applied
correctly.
Results
interpreted
correctly.
Statistical
methods applied
carefully and
precisely (with
cogent
justification).
Results
interpreted
carefully and
precisely.
Data visualisation
and presentation
(8 marks)
No/poor
visualisation of
results.
Visualisation(s) of
results mostly
appropriate and
correct.
Visualisation(s) of
results
appropriate and
correct.
Visualisation(s) of
results carefully
and precisely
(with cogent
No/poor
presentation of
story/findings.
Presentation of
story/findings
mostly clear to
readers.
Presentation of
story/findings
clear to readers.
justification)
produced.
Presentation of
story/findings
clear and
accessible to
readers.
Feedback and suggestion for future learning
Feedback on your coursework will address the above criteria. Individual feedback and marks
will be returned to you via Learning Central by the date stated on the front page of this
document.
Feedback from this assignment will be useful for your dissertation.
Submission Instructions
Description Type Name
Q1 Compulsory One PDF (.pdf) file (Part 1)
+
Spreadsheet for Q1 (Part 2)
+
One PDF (.pdf) file (cover
sheet)
Q1_[student number].pdf
Q1_[student number]_HE.xlsx
Q1_[student number]_CS.pdf
Q2 Compulsory
Individual report + cover
sheet + figure images
One ZIP (.zip) Q2_[student number].zip
Q3 Compulsory One PDF (.pdf) file (report)
+
One PDF (.pdf) file (cover
sheet)
Q3_[student number].pdf
Q3_[student number]_CS.pdf
Any deviation from the submission instructions above (including the number and types of
files submitted) may result in a mark of zero for the assessment or question part.
Staff reserve the right to invite students to a meeting to discuss coursework submissions
Support for assessment
Questions about the assessment can be asked at the lectures/seminars.
Support for the programming elements of the assessment will be available in the daily
drop-in lab sessions.

 WX：codehelp