代码and截图

1.babassl
ZUC算法代码：

#include <stdio.h>
#include <string.h>
#include <openssl/crypto.h>
#include <openssl/evp.h>

int main(int argc, char *argv[])
{
    EVP_MD_CTX *mctx = NULL;
    EVP_PKEY_CTX *pctx = NULL;
    EVP_PKEY *pkey = NULL;
    unsigned char *got = NULL;
    size_t got_len;
    char *mac;
    int rv;
    const char key[] = {
        0xc9, 0xe6, 0xce, 0xc4, 0x60, 0x7c, 0x72, 0xdb,
        0x00, 0x0a, 0xef, 0xa8, 0x83, 0x85, 0xab, 0x0a
        };
    /*
	 * EIA3 的 iv 只有5个字节(只用到38bit)，不是随机构造，构造方法如下：
	 * |----------32bit----------|-----5bit-----|---1bit---|
	 * |          count          |    bearer    | direction|
 	 */
    const char *iv = "a94059da54";
    const char msg[] = {
        0x98, 0x3b, 0x41, 0xd4, 0x7d, 0x78, 0x0c, 0x9e,
        0x1a, 0xd1, 0x1d, 0x7e, 0xb7, 0x03, 0x91, 0xb1,
        0xde, 0x0b, 0x35, 0xda, 0x2d, 0xc6, 0x2f, 0x83,
        0xe7, 0xb7, 0x8d, 0x63, 0x06, 0xca, 0x0e, 0xa0,
        0x7e, 0x94, 0x1b, 0x7b, 0xe9, 0x13, 0x48, 0xf9,
        0xfc, 0xb1, 0x70, 0xe2, 0x21, 0x7f, 0xec, 0xd9,
        0x7f, 0x9f, 0x68, 0xad, 0xb1, 0x6e, 0x5d, 0x7d,
        0x21, 0xe5, 0x69, 0xd2, 0x80, 0xed, 0x77, 0x5c,
        0xeb, 0xde, 0x3f, 0x40, 0x93, 0xc5, 0x38, 0x81,
        0x00
        };
    size_t msg_len = 73;

    /*
	 * 将 EIA3 的 key 转换成 EVP_PKEY
	 */
    pkey = EVP_PKEY_new_raw_private_key(EVP_PKEY_EIA3, NULL, key, 16);
    if (pkey == NULL)
        goto end;

    mctx = EVP_MD_CTX_new();
    if (mctx == NULL)
        goto end;

    if (!EVP_DigestSignInit(mctx, &pctx, NULL, NULL, pkey))
        goto end;

    /*
	 * 设置 EIA3 的 iv，其中 iv 是十六进制的字符串形式
	 * 也可以设置 hexkey 来修改 key，同样是十六进制的字符吕形式
	 */
    rv = EVP_PKEY_CTX_ctrl_str(pctx, "iv", iv);
    if (rv <= 0)
        goto end;

    if (!EVP_DigestSignUpdate(mctx, msg, msg_len))
        goto end;

    if (!EVP_DigestSignFinal(mctx, NULL, &got_len))
        goto end;

    got = OPENSSL_malloc(got_len);
    if (got == NULL)
        goto end;

    if (!EVP_DigestSignFinal(mctx, got, &got_len))
        goto end;

    /*
	 * EIA3 的 mac 值为4个字节，这里打印出来
	 */
    mac = OPENSSL_buf2hexstr(got, got_len);
    printf("MAC=%s\n", mac);

    OPENSSL_free(mac);

    end:
    EVP_MD_CTX_free(mctx);
    OPENSSL_free(got);
    EVP_PKEY_free(pkey);

    return 0;
}

ZUC测试截图

SM2代码：

//生成SM2私钥
openssl ecparam -genkey -name SM2 -out sm2.key

//生成证书签名请求 csr
openssl req -new -key sm2.key -out sm2.csr -sm3 -sigopt "sm2_id:1234567812345678"
//自签名测试证书
openssl x509 -req -in sm2.csr -signkey sm2.key -out sm2.crt -sm3 -sm2-id 1234567812345678 -sigopt "sm2_id:1234567812345678"

SM2测试截图



2.gmlib
SM3测试代码：

#include<gmlib/utils.h>
#include<gmlib/hash/sm3.h>
int main() {
    SM3_CTX sm3_ctx;
    uint8_t msg[] = {'a', 'b', 'c'};  // 原始消息
    uint8_t digest[SM3_DIGEST_SIZE];  // 消息摘要

    // 初始化 SM3
    sm3_init(&sm3_ctx);
    // 输入消息
    sm3_update(msg, sizeof(msg), &sm3_ctx);
    // 结束 SM3 并输出摘要 digest
    sm3_final(digest, &sm3_ctx);

    dump_data(digest, sizeof(digest));
    /*  SM3 摘要结果
        66 c7 f0 f4 62 ee ed d9 d1 f2 d4 6b dc 10 e4 e2
        41 67 c4 87 5c f2 f7 a2 29 7d a0 2b 8f 4b a8 e0
    */
    return 0;
}

SM4测试代码：

#include <gmlib/cipher/mode.h>
#include <gmlib/cipher/sm4.h>
#include <gmlib/err.h>
#include <gmlib/utils.h>

static uint8_t sm4_key[SM4_KEYLEN] = {
    0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef,
    0xfe, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10,
};

static uint8_t sm4_pt[SM4_BLOCK_SIZE] = {
    0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
    0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff,
};

static uint8_t out[SM4_BLOCK_SIZE * 2];

int main() {
    SM4_CTX sm4key;
    sm4_init(sm4_key, &sm4key);
    sm4_encrypt(out, sm4_pt, &sm4key);
    // 09 32 5c 48 53 83 2d cb 93 37 a5 98 4f 67 1b 9a
    dump_data(out, SM4_BLOCK_SIZE);

    ECB_CTX ctx;
    uint8_t* outptr = out;
    int outl;
    ecb_init(sm4_key, &SM4Info, &sm4key, &ctx);
    ecb_encrypt_update(outptr, &outl, sm4_pt, sizeof(sm4_pt), &ctx);
    outptr += outl;
    ecb_encrypt_final(outptr, &outl, &ctx);
    outptr += outl;
    // 09 32 5c 48 53 83 2d cb 93 37 a5 98 4f 67 1b 9a
    // 00 2a 8a 4e fa 86 3c ca d0 24 ac 03 00 bb 40 d2
    dump_data(out, (int)(outptr - out));

    return 0;
}

tjfoc-gm
代码：

package main

import (
	"bytes"
	"crypto/cipher"
	"crypto/rand"
	"fmt"
	"log"

	"github.com/Hyperledger-TWGC/tjfoc-gm/sm2"
	"github.com/Hyperledger-TWGC/tjfoc-gm/sm3"
	"github.com/Hyperledger-TWGC/tjfoc-gm/sm4"
)

func main() {
	SM2()

	SM3()

	SM4()
}

func SM2() {
	priv, err := sm2.GenerateKey(rand.Reader) // 生成密钥对
	if err != nil {
		log.Fatal(err)
	}
	msg := []byte("Tongji Fintech Research Institute")
	pub := &priv.PublicKey
	ciphertxt, err := sm2.Encrypt(pub, msg, rand.Reader)
	if err != nil {
		log.Fatal(err)
	}
	fmt.Println("SM2加密密文是：", string(msg))
	fmt.Printf("SM2加密结果是：%x\n", ciphertxt)
	
	plaintxt, err := priv.Decrypt(nil, ciphertxt, nil)
	if err != nil {
		log.Fatal(err)
	}
	if !bytes.Equal(msg, plaintxt) {
		log.Fatal("原文不匹配")
	}

	sign, err := priv.Sign(rand.Reader, msg, nil)
	if err != nil {
		log.Fatal(err)
	}

	isok := priv.PublicKey.Verify(msg, sign)
	fmt.Printf("SM2 Verified: %v\n", isok)
}

func SM3() {
	data := "test"
	h := sm3.New()
	h.Write([]byte(data))
	sum := h.Sum(nil)
	fmt.Printf("SM3 digest value is: %x\n", sum)
}

func SM4() {
	// 128比特密钥
	key := []byte("1234567890abcdef")
	// 128比特iv
	iv := make([]byte, sm4.BlockSize)
	data := []byte("Tongji Fintech Research Institute")
	fmt.Println("SM4加密密文是：", string(data))
	ciphertxt, err := sm4Encrypt(key, iv, data)
	if err != nil {
		log.Fatal(err)
	}
	fmt.Printf("SM4加密结果: %x\n", ciphertxt)

	res, err := sm4Decrypt(key, iv, ciphertxt)
	if err != nil {
		log.Fatal(err)
	}
	fmt.Printf("SM4解密结果: %x\n", res)
	fmt.Println("SM4解密密文是：", string(res))
}

func sm4Encrypt(key, iv, plainText []byte) ([]byte, error) {
	block, err := sm4.NewCipher(key)
	if err != nil {
		return nil, err
	}
	blockSize := block.BlockSize()
	origData := pkcs5Padding(plainText, blockSize)
	blockMode := cipher.NewCBCEncrypter(block, iv)
	cryted := make([]byte, len(origData))
	blockMode.CryptBlocks(cryted, origData)
	return cryted, nil
}

func sm4Decrypt(key, iv, cipherText []byte) ([]byte, error) {
	block, err := sm4.NewCipher(key)
	if err != nil {
		return nil, err
	}
	blockMode := cipher.NewCBCDecrypter(block, iv)
	origData := make([]byte, len(cipherText))
	blockMode.CryptBlocks(origData, cipherText)
	origData = pkcs5UnPadding(origData)
	return origData, nil
}

// pkcs5填充
func pkcs5Padding(src []byte, blockSize int) []byte {
	padding := blockSize - len(src)%blockSize
	padtext := bytes.Repeat([]byte{byte(padding)}, padding)
	return append(src, padtext...)
}

func pkcs5UnPadding(src []byte) []byte {
	length := len(src)
	if length == 0 {
		return nil
	}
	unpadding := int(src[length-1])
	return src[:(length - unpadding)]
}

crypto++
代码：

#include "pch.h"
#include <string>
#include <cstring>
#include <vector>
#include <iostream>
#include <fstream>
#include <iomanip>
#include <algorithm>
#include "cryptopp/aes.h"
#include "cryptopp/filters.h"
#include "cryptopp/modes.h"
using namespace std;
using namespace CryptoPP;

byte key[CryptoPP::AES::DEFAULT_KEYLENGTH], iv[CryptoPP::AES::BLOCKSIZE];

void initKV() {
	memset(key, 0x00, CryptoPP::AES::DEFAULT_KEYLENGTH);
	memset(iv, 0x00, CryptoPP::AES::BLOCKSIZE);
}

string encrypt(string plainText) {
	string cipherText;

	CryptoPP::AES::Encryption aesEncryption(key, CryptoPP::AES::DEFAULT_KEYLENGTH);
	CryptoPP::CBC_Mode_ExternalCipher::Encryption cbcEncryption(aesEncryption, iv);
	CryptoPP::StreamTransformationFilter stfEncryptor(cbcEncryption, new CryptoPP::StringSink(cipherText));
	stfEncryptor.Put(reinterpret_cast<const unsigned char*>(plainText.c_str()), plainText.length() + 1);
	stfEncryptor.MessageEnd();

	string cipherTextHex;
	for (int i = 0; i < cipherText.size(); i++)
	{
		char ch[3] = { 0 };
		sprintf_s(ch, "%02x", static_cast<byte>(cipherText[i]));
		cipherTextHex += ch;
	}

	return cipherTextHex;
}


int main() {
	string text = "20201303zyb";
	cout << "text : " << text << endl;

	initKV();
	string cipherHex = encrypt(text);
	cout << "cipher : " << cipherHex << endl;
}

Miracl
代码：

#include <stdio.h>
#include <string.h>
#include <time.h>


#include "sm9/sm9_algorithm.h"
#include "sm9/print_out.h"

#define TEST 100

int main(int argc, char **argv)
{
    printf("20201303begin test \n");
//===========签名用到的参数==========
    unsigned char cks[32] = "\x86\xDC\xD6\x4F\xEB\x81\xA7\x19\x63\x59\x59\xF1\xA5\xC2\xF9\x88\xBD\x39\x43\x1B\x08\xA8\x63\xF0\x42\x8D\x21\xDF\xFA\xF2\xBF\x89";
    unsigned char id[5] = {"\x41\x6C\x69\x63\x65"};
    unsigned char rand[32] = {"\x1A\x23\x29\x77\xBA\x9F\xA2\xD1\xC5\x58\xF2\xD4\x67\xFE\x7B\xE7\x04\x05\x41\x26\x73\xF8\xBE\x64\x9B\xBD\xD4\xA0\x95\xBE\x1B\x4B"};
    unsigned char msg[20] = {"\x43\x68\x69\x6E\x65\x73\x65\x20\x49\x42\x53\x20\x73\x74\x61\x6E\x64\x61\x72\x64"};
//========加密用到的参数===================
    unsigned char cmsg[20] = {"\x43\x68\x69\x6E\x65\x73\x65\x20\x49\x42\x45\x20\x73\x74\x61\x6E\x64\x61\x72\x64"};
    unsigned char eks[32] = {"\x00\x01\xED\xEE\x37\x78\xF4\x41\xF8\xDE\xA3\xD9\xFA\x0A\xCC\x4E\x07\xEE\x36\xC9\x3F\x9A\x08\x61\x8A\xF4\xAD\x85\xCE\xDE\x1C\x22"};
    unsigned char eid[3] = {"\x42\x6F\x62"};
    unsigned char er[32] = {"\x00\x00\xAA\xC0\x54\x17\x79\xC8\xFC\x45\xE3\xE2\xCB\x25\xC1\x2B\x5D\x25\x76\xB2\x12\x9A\xE8\xBB\x5E\xE2\xCB\xE5\xEC\x9E\x78\x5C"};
    unsigned char plain[32];
    unsigned int plainlen;
//==============密钥交换用到的参数================
    unsigned char kks[32] = {"\x00\x02\xE6\x5B\x07\x62\xD0\x42\xF5\x1F\x0D\x23\x54\x2B\x13\xED\x8C\xFA\x2E\x9A\x0E\x72\x06\x36\x1E\x01\x3A\x28\x39\x05\xE3\x1F"};
    unsigned char alice[5] = {"\x41\x6C\x69\x63\x65"};
    unsigned char bob[3] = {"\x42\x6F\x62"};
    
    unsigned char ra[32] = {"\x00\x00\x58\x79\xDD\x1D\x51\xE1\x75\x94\x6F\x23\xB1\xB4\x1E\x93\xBA\x31\xC5\x84\xAE\x59\xA4\x26\xEC\x10\x46\xA4\xD0\x3B\x06\xC8"};
    
    unsigned char rb[32] = {"\x00\x01\x8B\x98\xC4\x4B\xEF\x9F\x85\x37\xFB\x7D\x07\x1B\x2C\x92\x8B\x3B\xC6\x5B\xD3\xD6\x9E\x1E\xEE\x21\x35\x64\x90\x56\x34\xFE"};
    
    time_t start,end;
    int res;
    
    unsigned char *gg;
    
    unsigned char AS1[32];
    unsigned char AS2[32];
    unsigned char ASK[16];
    
    unsigned char BS1[32];
    unsigned char BS2[32];
    unsigned char BSK[16];


    
//============独立验证时用到的参数==========
    unsigned char x1[32] = {"\x0f\xbd\x02\x40\x35\xb4\xca\x2f\x94\x14\x4f\xdf\x33\x3b\xf8\xe1\x81\x74\x7c\x8d\xd8\x5d\xe4\x12\xad\xc7\x18\x18\x98\x72\x43\x27"};
    unsigned char x2[32] = {"\x13\x2d\x39\x44\x38\x7b\x63\x1e\xe4\xb0\x55\x89\x9f\x6c\xfe\x42\x8f\xb9\xfc\x9f\xa2\x75\x68\x9f\xeb\x36\xbe\x2b\x60\x21\xea\xbe"};
    unsigned char y1[32] = {"\x07\x81\x20\x17\xdb\x06\x91\xd3\x43\x11\x36\x83\x21\x19\xe0\xe1\x94\x4e\x85\x5a\xed\xfc\xa7\x10\xed\xd1\x46\x6e\x69\x01\x8e\xa1"};
    unsigned char y2[32] = {"\x89\xf9\xf0\x0f\x5e\x05\x10\x6c\xb3\x4f\x60\x0f\xd9\x48\x92\x4b\x87\x24\x7b\xde\x11\xdf\x34\x01\x3d\xb6\xb9\x54\xbb\xf1\x9a\x55"};
    
    unsigned char h[32] = {"\xa1\xc3\xa6\xce\x30\x90\xea\x0d\xbd\x07\xe2\x1b\xcb\xdb\x43\x40\x4b\x80\x98\xf1\x90\x4d\xd6\xe7\x28\x3c\x7d\xfc\xdb\x23\x65\x91"};
    unsigned char xs[32] = {"\x2f\x5f\xe6\x33\xb6\x04\x16\x76\xfe\x77\x0d\x3f\xd3\x09\x6e\x0b\x64\xb0\x01\x0e\x1d\xa5\x50\x96\x5c\xd1\x94\xad\x53\x51\xa4\x98"};
    unsigned char ys[32] = {"\x51\x2b\x48\xf2\xae\xde\x4b\x10\xef\x25\xca\x58\x46\x49\x93\x8b\xfc\xd6\x3e\xe8\xb4\x8f\xbb\x86\xeb\x82\xa8\x22\x42\x97\x63\x14"};
    
    
    //如下可以使用SM9 第五部分 指定的曲线类型和主密钥初始化系统
    //也可以使用自定义曲线
    //
    SM9_Init(0,0,32,NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL );

    
// ========================================================
    SM9_MSK msk = SM9_MSK_New(32, cks);  // 申明一个签名主密钥
    SM9_MSPK mspk = SM9_MSPK_New(32);   //申明一个主签名公钥

    SM9_GenMSignPubKey(&msk, &mspk);  // 生成签名主公钥
    
    gg = SM9_Set_Sign(mspk.x1, mspk.x2, mspk.y1, mspk.y2, NULL); // 启动签名lib
    
    if (gg == NULL){
        printf("init sign lib error\n");
        return 1;
    }
    SM9_PK pk = SM9_PK_New(5, id);       // 申明一个签名公钥
    SM9_SSK sk = SM9_SSK_New(32);            // 申明一个签名私钥
    
    SM9_GenSignSecKey(&sk, &pk, &msk); // 由公钥（id）生成签名私钥
    
    SM9_Sign sign = SM9_Sign_New(32);   // 申明一个签名体

//===============signature test===============
      //使用私钥sk和随机数ran，对消息mes签名
    time(&start);
 
    for(int i=0;i<TEST;i++){
        SM9_Signature(msg, 20, rand, &sk, &sign);
    }
    time(&end);
    
    printf("sign %d time is %ld sec\n",TEST, end-start);
 
    time(&start);
    for(int i=0;i<TEST;i++){// 验证函数
        res = SM9_Verify(msg, 20, &sign, &pk, NULL);
        if (res) printf("verify error at %d = %d\n", i,res);
    }
    
    time(&end);
    printf("verify %d time is %ld sec\n",TEST, end-start);
 
//===============independent verify test===============
    SM9_Free();  //注销SM9
    
    //重新启动SM9
    SM9_Init(0,0,32,NULL,NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL );
    
    SM9_MSPK inmspk = SM9_MSPK_New(32);
    SM9_Sign insign = SM9_Sign_New(32);
    SM9_PK inpk = SM9_PK_New(5, id);
    
    inmspk.secLevel =32;
    inmspk.x1 = x1;
    inmspk.x2 = x2;
    inmspk.y1 = y1;
    inmspk.y2 = y2;
    
    gg = SM9_Set_Sign(inmspk.x1, inmspk.x2, inmspk.y1, inmspk.y2, NULL); // 启动签名lib
    
    if (gg == NULL){
        printf("init sign lib error\n");
        return 1;
    }
    
    insign.h = h;
    insign.xs = xs;
    insign.ys = ys;
    int inres;
    inres = SM9_Verify(msg, 20, &insign, &inpk, NULL);
    if (inres) {
        printf("independent verify error = %d\n",inres);
    }else{
        printf("independent verify success! \n");
    }
    
//===============encryption test===============
    SM9_MSK esk = SM9_MSK_New(32, eks);  // 申明一个加密主密钥
    SM9_MCPK mcpk = SM9_MCPK_New(32);   //申明一个主加密公钥
    SM9_GenMEncryptPubKey(&esk, &mcpk); // 生成加密主公钥
    gg = SM9_Set_Encrypt(mcpk.x, mcpk.y,NULL);  // 启动加密lib
    if (gg == NULL){
        printf("init encryption lib error\n");
        return 1;
    }
    
    SM9_PK epk = SM9_PK_New(3, eid);   //申明一个加密公钥
    SM9_CSK csk = SM9_CSK_New(32);   //申明一个加密私钥
    SM9_GenEncryptSecKey(&csk, &epk, &esk);  // 由公钥（id）生成加密私钥
    
    SM9_Cipher cipher = SM9_Cipher_New(32);

    time(&start);
    for(int i=0;i<TEST;i++){
        SM9_Encrypt(cmsg, 20, KDF_SM4, er, &epk, &cipher);
    }
    time(&end);
    printf("Encrypt %d time is %ld sec\n",TEST, end-start);
    
    time(&start);
    for(int i=0;i<TEST;i++){
        res = SM9_Decrypt(&epk, KDF_SM4, &csk, &cipher, plain, &plainlen);
        if (res) printf("decrypt error code is %d \n", res);
    }
    time(&end);
    printf("Decrypt %d time is %ld sec\n",TEST, end-start);

    
//===============keyexchange test===============
    SM9_MSK ksk = SM9_MSK_New(32, kks);
    
    SM9_MKPK mkpk = SM9_MKPK_New(32);   //申明一个主协商公钥
    SM9_GenMKeyExchangePubKey(&ksk, &mkpk); // 生成协商主公钥
    
    gg = SM9_Set_KeyExchange(mkpk.x, mkpk.y,NULL);  // 启动协商lib
    
    if (gg == NULL){
        printf("init keyexchange lib error\n");
        return 1;
    }
    
    SM9_PK  apk = SM9_PK_New(5, alice);
    SM9_KSK ask = SM9_KSK_New(32);
    SM9_GenKeyExchangeSecKey(&ask, &apk, &ksk);
    
    SM9_PK  bpk = SM9_PK_New(3, bob);
    SM9_KSK bsk = SM9_KSK_New(32);
    SM9_GenKeyExchangeSecKey(&bsk, &bpk, &ksk);
    
    SM9_Send ase = SM9_Send_New(32);
    SM9_Send bse = SM9_Send_New(32);
    
    SM9_SendStep(ra, &bpk, &ase);
    SM9_SendStep(rb, &apk, &bse);

  
    
    time(&start);
    for(int i=0;i<TEST;i++){
        SM9_ReceiveStep(ra, &ase, &bse, &apk, &bpk, &ask, 16, AS1, AS2, ASK, AKE_SENDER);
        SM9_ReceiveStep(rb, &bse, &ase, &bpk, &apk, &bsk, 16, BS1, BS2, BSK, AKE_RECEIVER);
        if(SM9_CheckStep(AS1, BS2)) printf("error at step 1\n");
        if(SM9_CheckStep(AS2, BS1)) printf("error at step 2\n");
    }
    time(&end);
    printf("key exchange %d time is %ld sec\n", TEST*2,end-start);
    printf("end test \n ================== \n");
    return 0;
}

GMSSL
sm3命令行：
echo '20201303zyb' | gmssl sm3

OPENSSL
SM4代码

#include <stddef.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "openssl/err.h"
#include "openssl/evp.h"
 
/* Before OpenSSL 1.1.1-pre1, we did not have EVP_sm4_ecb() */
#if defined(OPENSSL_VERSION_NUMBER) \
    && OPENSSL_VERSION_NUMBER < 0x10101001L
static const EVP_CIPHER *(*EVP_sm4_ecb)()=EVP_aes_128_ecb;
#endif
 
typedef struct {
    const unsigned char *in_data;
    size_t in_data_len;
    int in_data_is_already_padded;
    const unsigned char *in_ivec;
    const unsigned char *in_key;
    size_t in_key_len;
} test_case_t;
 
 
void test_encrypt_with_cipher(const test_case_t *in, const EVP_CIPHER *cipher)
{
    unsigned char *out_buf = NULL;
    int out_len;
    int out_padding_len;
    EVP_CIPHER_CTX *ctx;
 
    ctx = EVP_CIPHER_CTX_new();
    EVP_EncryptInit_ex(ctx, cipher, NULL, in->in_key, in->in_ivec);
 
    if (in->in_data_is_already_padded)
    {
        /* Check whether the input data is already padded.
        And its length must be an integral multiple of the cipher's block size. */
        const size_t bs = EVP_CIPHER_block_size(cipher);
        if (in->in_data_len % bs != 0)
        {
            printf("ERROR-1: data length=%d which is not added yet; block size=%d\n", (int) in->in_data_len, (int) bs);
            /* Warning: Remember to do some clean-ups */
            EVP_CIPHER_CTX_free(ctx);
            return;
        }
        /* Disable the implicit PKCS#7 padding defined in EVP_CIPHER */
        EVP_CIPHER_CTX_set_padding(ctx, 0);
    }
 
    out_buf = (unsigned char *) malloc(((in->in_data_len>>4)+1) << 4);
    out_len = 0;
    EVP_EncryptUpdate(ctx, out_buf, &out_len, in->in_data, in->in_data_len);
    if (1)
    {
        printf("Debug: out_len=%d\n", out_len);
    }
 
    out_padding_len = 0;
    EVP_EncryptFinal_ex(ctx, out_buf+out_len, &out_padding_len);
    if (1)
    {
        printf("Debug: out_padding_len=%d\n", out_padding_len);
    }
 
    EVP_CIPHER_CTX_free(ctx);
    if (1)
    {
        int i;
        int len;
        len = out_len + out_padding_len;
        for (i=0; i<len; i++)
        {
            printf("%02x ", out_buf[i]);
        }
        printf("\n");
    }
 
    if (out_buf)
    {
        free(out_buf);
        out_buf = NULL;
    }
}
 
void main()
{
    int have_sm4 = (OPENSSL_VERSION_NUMBER >= 0x10101001L);
    int have_aes = 1;
    const unsigned char data[]=
    {
        0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef,
        0xfe, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10,
    };
    unsigned char ivec[EVP_MAX_IV_LENGTH]; ///< IV 向量
    const unsigned char key1[16] = ///< key_data, 密钥内容, 至少16字节
    {
        0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef,
        0xfe, 0xdc, 0xba, 0x98, 0x76, 0x54, 0x32, 0x10,
    };
    test_case_t tc;
 
    tc.in_data = data;
    tc.in_data_len = sizeof(data);
    tc.in_data_is_already_padded = (tc.in_data_len % 16)==0; // Hard coded 16 as the cipher's block size
    tc.in_key = key1;
    tc.in_key_len = sizeof(key1);
    memset(ivec, 0x00, EVP_MAX_IV_LENGTH);
    tc.in_ivec = ivec;
 
#if defined(OPENSSL_NO_SM4)
    have_sm4 = 0;
#endif
    if (have_sm4)
    {
        printf("[1]\n");
        printf("Debug: EVP_sm4_ecb() test\n");
        test_encrypt_with_cipher(&tc, EVP_sm4_ecb());
    }
#if defined(OPENSSL_NO_AES)
    have_aes = 0;
#endif
    if (have_aes)
    {
        printf("[2]\n");
        printf("Debug: EVP_aes_128_ecb() test\n");
        test_encrypt_with_cipher(&tc, EVP_aes_128_ecb());
    }
}

SM3代码

#include <stdio.h>
#include <string.h>
#include <openssl/evp.h>
#include <openssl/err.h>
void tDigest(){
	unsigned char md_value[EVP_MAX_MD_SIZE];
	unsigned int md_len;
	EVP_MD_CTX *mdctx;
	mdctx = EVP_MD_CTX_new();
	char msg1[] = "20201303";
	char msg2[] = "ZHANGyibo";
	EVP_MD_CTX_init(mdctx);
	EVP_DigestInit_ex(mdctx, EVP_sm3(), NULL);
	EVP_DigestUpdate(mdctx, msg1, strlen(msg1));
	EVP_DigestUpdate(mdctx, msg2, strlen(msg2));
	EVP_DigestFinal_ex(mdctx, md_value, &md_len);
	EVP_MD_CTX_destroy(mdctx);

	printf("Debug:Message1%s and Message2%s digest to:\n",msg1, msg2);
	for(int i = 0; i<md_len; i++){

		printf("0x%02x ", md_value[i]);
	}
	printf("\n");
}

int main(){

	OpenSSL_add_all_algorithms();
	tDigest();
	return 0;
}