首页 > 其他分享 >实验6：开源控制器实践——RYU

实验6：开源控制器实践——RYU

时间：2022-10-28 23:14:56浏览次数：34  
标签：控制器 parser datapath id msg 开源 ofproto RYU port

（一）基本要求

1.搭建所示SDN拓扑，协议使用Open Flow 1.0，并连接Ryu控制器，通过Ryu的图形界面查看网络拓扑。

  • 构建拓扑
sudo mn --topo=single,3 --mac --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow10
  • 连接ryu控制器
ryu-manager ryu/ryu/app/gui_topology/gui_topology.py --observe-links

通过Ryu的图形界面查看网络拓扑,在浏览器中输入127.0.0.1:8080

2.阅读Ryu文档的The First Application一节，运行当中的L2Switch，h1 ping h2或h3，在目标主机使用 tcpdump 验证L2Switch，分析L2Switch和POX的Hub模块有何不同。

  • 运行L2Switch.py
from ryu.base import app_manager
from ryu.controller import ofp_event
from ryu.controller.handler import MAIN_DISPATCHER
from ryu.controller.handler import set_ev_cls
from ryu.ofproto import ofproto_v1_0

class L2Switch(app_manager.RyuApp):
    OFP_VERSIONS = [ofproto_v1_0.OFP_VERSION]

    def __init__(self, *args, **kwargs):
        super(L2Switch, self).__init__(*args, **kwargs)

    @set_ev_cls(ofp_event.EventOFPPacketIn, MAIN_DISPATCHER)
    def packet_in_handler(self, ev):
        msg = ev.msg
        dp = msg.datapath
        ofp = dp.ofproto
        ofp_parser = dp.ofproto_parser

        actions = [ofp_parser.OFPActionOutput(ofp.OFPP_FLOOD)]

        data = None
        if msg.buffer_id == ofp.OFP_NO_BUFFER:
             data = msg.data

        out = ofp_parser.OFPPacketOut(
            datapath=dp, buffer_id=msg.buffer_id, in_port=msg.in_port,
            actions=actions, data = data)
        dp.send_msg(out)
  • 运行L2Switch.py
ryu-manager L2Switch.py

*重新构建拓扑，并对h2、h3节点进行抓包

  • h1 ping h2

  • h1 ping h3

  • 查看流表

  • pox下查看拓扑流表

对比可得，ryu下查不到流表，而在pox下可查看流表。

3.编程修改L2Switch.py，另存为L2xxxxxxxxx.py，使之和POX的Hub模块的变得一致？（L2_212006230.py）

from ryu.base import app_manager
from ryu.controller import ofp_event
from ryu.controller.handler import MAIN_DISPATCHER
from ryu.controller.handler import CONFIG_DISPATCHER, MAIN_DISPATCHER
from ryu.controller.handler import set_ev_cls
from ryu.ofproto import ofproto_v1_3

class L2Switch(app_manager.RyuApp):
    OFP_VERSIONS = [ofproto_v1_3.OFP_VERSION]

    def __init__(self, *args, **kwargs):
        super(L2Switch, self).__init__(*args, **kwargs)

    @set_ev_cls(ofp_event.EventOFPSwitchFeatures, CONFIG_DISPATCHER)
    def switch_features_handler(self, ev):
        datapath = ev.msg.datapath
        ofproto = datapath.ofproto
        parser = datapath.ofproto_parser

        # install table-miss flow entry
        #
        # We specify NO BUFFER to max_len of the output action due to
        # OVS bug. At this moment, if we specify a lesser number, e.g.,
        # 128, OVS will send Packet-In with invalid buffer_id and
        # truncated packet data. In that case, we cannot output packets
        # correctly.  The bug has been fixed in OVS v2.1.0.
        match = parser.OFPMatch()
        actions = [parser.OFPActionOutput(ofproto.OFPP_CONTROLLER,
                                          ofproto.OFPCML_NO_BUFFER)]
        self.add_flow(datapath, 0, match, actions)

    def add_flow(self, datapath, priority, match, actions, buffer_id=None):
        ofproto = datapath.ofproto
        parser = datapath.ofproto_parser

        inst = [parser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
                                             actions)]
        if buffer_id:
            mod = parser.OFPFlowMod(datapath=datapath, buffer_id=buffer_id,
                                    priority=priority, match=match,
                                    instructions=inst)
        else:
            mod = parser.OFPFlowMod(datapath=datapath, priority=priority,
                                    match=match, instructions=inst)
        datapath.send_msg(mod)

    @set_ev_cls(ofp_event.EventOFPPacketIn, MAIN_DISPATCHER)
    def packet_in_handler(self, ev):
        msg = ev.msg
        dp = msg.datapath
        ofp = dp.ofproto
        ofp_parser = dp.ofproto_parser
        in_port = msg.match['in_port']

        actions = [ofp_parser.OFPActionOutput(ofp.OFPP_FLOOD)]

        data = None
        if msg.buffer_id == ofp.OFP_NO_BUFFER:
             data = msg.data

        out = ofp_parser.OFPPacketOut(
            datapath=dp, buffer_id=msg.buffer_id, in_port=in_port,
            actions=actions, data = data)
        dp.send_msg(out)
  • 运行L2_212006230.py
ryu-manager L2_212006230.py
  • 查看流表
dpctl dump-flows

（二）进阶要求

1.阅读Ryu关于simple_switch.py和simple_switch_1x.py的实现，以simple_switch_13.py为例，完成其代码的注释工作，并回答下列问题：

# Copyright (C) 2011 Nippon Telegraph and Telephone Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#进入各类包
from ryu.base import app_manager
from ryu.controller import ofp_event
from ryu.controller.handler import CONFIG_DISPATCHER, MAIN_DISPATCHER
from ryu.controller.handler import set_ev_cls
from ryu.ofproto import ofproto_v1_3
from ryu.lib.packet import packet
from ryu.lib.packet import ethernet
from ryu.lib.packet import ether_types


class SimpleSwitch13(app_manager.RyuApp):
    OFP_VERSIONS = [ofproto_v1_3.OFP_VERSION]#定义openflow的版本为1.3

    def __init__(self, *args, **kwargs):
        super(SimpleSwitch13, self).__init__(*args, **kwargs)# 定义保存mac地址到端口的映射，self.mac_to_port是mac地址映射到转发端口的字典。
        self.mac_to_port = {}
 # 处理EventOFPSwitchFeatures事件
    @set_ev_cls(ofp_event.EventOFPSwitchFeatures, CONFIG_DISPATCHER)
    def switch_features_handler(self, ev): #ev.msg 是用来存储对应事件的 OpenFlow 消息类别实体
        datapath = ev.msg.datapath # ofproto表示使用的OpenFlow版本所对应的ryu.ofproto.ofproto_v1_3
        ofproto = datapath.ofproto # 使用对应版本的ryu.ofproto.ofproto_v1_3_parser来解析协议
        parser = datapath.ofproto_parser

        # install table-miss flow entry
        #
        # We specify NO BUFFER to max_len of the output action due to
        # OVS bug. At this moment, if we specify a lesser number, e.g.,
        # 128, OVS will send Packet-In with invalid buffer_id and
        # truncated packet data. In that case, we cannot output packets
        # correctly.  The bug has been fixed in OVS v2.1.0.
        match = parser.OFPMatch()
        actions = [parser.OFPActionOutput(ofproto.OFPP_CONTROLLER,
                                          ofproto.OFPCML_NO_BUFFER)]
        self.add_flow(datapath, 0, match, actions) # priority = 0表示优先级最低，即若所有流表都匹配不到时，才会把数据包发送到controller
# 执行 add_flow() 方法以发送 Flow Mod 消息
# 添加流表函数
    def add_flow(self, datapath, priority, match, actions, buffer_id=None):
        ofproto = datapath.ofproto
        parser = datapath.ofproto_parser
# 获取交换机信息
        inst = [parser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
                                             actions)]# 对action进行包装
# 判断是否有buffer_id，并生成mod对象
        if buffer_id:
            mod = parser.OFPFlowMod(datapath=datapath, buffer_id=buffer_id,
                                    priority=priority, match=match,
                                    instructions=inst)
        else:
            mod = parser.OFPFlowMod(datapath=datapath, priority=priority,
                                    match=match, instructions=inst)
        datapath.send_msg(mod) # 发送mod
# 处理 packet in 事件
    @set_ev_cls(ofp_event.EventOFPPacketIn, MAIN_DISPATCHER)
    def _packet_in_handler(self, ev):
        # If you hit this you might want to increase
        # the "miss_send_length" of your switch
        if ev.msg.msg_len < ev.msg.total_len:
            self.logger.debug("packet truncated: only %s of %s bytes",
                              ev.msg.msg_len, ev.msg.total_len)
# 获取包信息，交换机信息，协议等等
        msg = ev.msg
        datapath = msg.datapath
        ofproto = datapath.ofproto
        parser = datapath.ofproto_parser
        in_port = msg.match['in_port']

        pkt = packet.Packet(msg.data)
        eth = pkt.get_protocols(ethernet.ethernet)[0]

        if eth.ethertype == ether_types.ETH_TYPE_LLDP:
            # ignore lldp packet # 忽略LLDP类型的数据包
            return
 # 获取源端口，目的端口
        dst = eth.dst
        src = eth.src

        dpid = format(datapath.id, "d").zfill(16)
        self.mac_to_port.setdefault(dpid, {})

        self.logger.info("packet in %s %s %s %s", dpid, src, dst, in_port)
# 学习包的源地址和交换机上的入端口绑定
#dpid是交换机的id，src是数据包的源mac地址，in_port是交换机接受到包的端口
        # learn a mac address to avoid FLOOD next time.
        self.mac_to_port[dpid][src] = in_port
# 查看是否已经学习过该目的mac地址
#如果已经学习到，则向交换机下发流表,并让交换机向相应端口转发包
        if dst in self.mac_to_port[dpid]:
            out_port = self.mac_to_port[dpid][dst]
        # 如果没有，则无法下发流表，进行洪泛转发
        else:
            out_port = ofproto.OFPP_FLOOD

        actions = [parser.OFPActionOutput(out_port)]
# 下发流表处理后续包，不再触发PACKETIN事件
        # install a flow to avoid packet_in next time
        if out_port != ofproto.OFPP_FLOOD:
            match = parser.OFPMatch(in_port=in_port, eth_dst=dst, eth_src=src)
            # verify if we have a valid buffer_id, if yes avoid to send both
            # flow_mod & packet_out
#buffer_id不为None，控制器只需下发流表的命令，交换机增加了流表项后，位于缓冲区的数据包，会自动转发出去。
            if msg.buffer_id != ofproto.OFP_NO_BUFFER:
                self.add_flow(datapath, 1, match, actions, msg.buffer_id)
                return
#buffer_id为None，则控制器不仅要更改交换机的流表项，还要把数据包的信息传给交换机，让交换机把数据包转发出去。
            else:
                self.add_flow(datapath, 1, match, actions)
        data = None
        if msg.buffer_id == ofproto.OFP_NO_BUFFER:
            data = msg.data

        out = parser.OFPPacketOut(datapath=datapath, buffer_id=msg.buffer_id,
                                  in_port=in_port, actions=actions, data=data)
        datapath.send_msg(out)# 发送流表

a)代码当中的mac_to_port的作用是什么？

  • 保存mac地址到交换机端口的映射

b)simple_switch和simple_switch_13在dpid的输出上有何不同？

  • simple_switch是直接输出dpid，而simple_switch_13是在dpid前端填充0直至满16位。

c)相比simple_switch，simple_switch_13增加的switch_feature_handler实现了什么功能？

  • switch_feature_handler的作用是：将缺失流表项添加到流表中，当封包没有匹配到流表项时，就触发packet_in

d)simple_switch_13是如何实现流规则下发的？

  • 在接收到packetin事件后，首先获取包学习，交换机信息，以太网信息，协议信息等。
    如果以太网类型是LLDP类型，则不予处理。
    如果不是，则获取源端口目的端口，以及交换机id，先学习源地址对应的交换机的入端口，再查看是否已经学习目的mac地址，如果没有则进行洪泛转发。
    如果学习过该mac地址，则查看是否有buffer_id，如果有的话，则在添加流动作时加上buffer_id，向交换机发送流表。

e)switch_features_handler和_packet_in_handler两个事件在发送流规则的优先级上有何不同？

  • switch_features_handler下发流表的优先级比_packet_in_handler高。

2.编程实现和ODL实验的一样的硬超时功能。

  • break.py代码
# Copyright (C) 2011 Nippon Telegraph and Telephone Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied.
# See the License for the specific language governing permissions and
# limitations under the License.

from ryu.base import app_manager
from ryu.controller import ofp_event
from ryu.controller.handler import CONFIG_DISPATCHER, MAIN_DISPATCHER
from ryu.controller.handler import set_ev_cls
from ryu.ofproto import ofproto_v1_3
from ryu.lib.packet import packet
from ryu.lib.packet import ethernet
from ryu.lib.packet import ether_types


class SimpleSwitch13(app_manager.RyuApp):
    OFP_VERSIONS = [ofproto_v1_3.OFP_VERSION]

    def __init__(self, *args, **kwargs):
        super(SimpleSwitch13, self).__init__(*args, **kwargs)
        self.mac_to_port = {}

    @set_ev_cls(ofp_event.EventOFPSwitchFeatures, CONFIG_DISPATCHER)
    def switch_features_handler(self, ev):
        datapath = ev.msg.datapath
        ofproto = datapath.ofproto
        parser = datapath.ofproto_parser

        # install table-miss flow entry
        #
        # We specify NO BUFFER to max_len of the output action due to
        # OVS bug. At this moment, if we specify a lesser number, e.g.,
        # 128, OVS will send Packet-In with invalid buffer_id and
        # truncated packet data. In that case, we cannot output packets
        # correctly.  The bug has been fixed in OVS v2.1.0.
        match = parser.OFPMatch()
        actions = [parser.OFPActionOutput(ofproto.OFPP_CONTROLLER,
                                          ofproto.OFPCML_NO_BUFFER)]
        self.add_flow(datapath, 0, match, actions)

    def add_flow(self, datapath, priority, match, actions, buffer_id=None, hard_timeout=0):
        ofproto = datapath.ofproto
        parser = datapath.ofproto_parser

        inst = [parser.OFPInstructionActions(ofproto.OFPIT_APPLY_ACTIONS,
                                             actions)]
        if buffer_id:
            mod = parser.OFPFlowMod(datapath=datapath, buffer_id=buffer_id,
                                    priority=priority, match=match,
                                    instructions=inst, hard_timeout=hard_timeout)
        else:
            mod = parser.OFPFlowMod(datapath=datapath, priority=priority,
                                    match=match, instructions=inst, hard_timeout=hard_timeout)
        datapath.send_msg(mod)

    @set_ev_cls(ofp_event.EventOFPPacketIn, MAIN_DISPATCHER)
    def _packet_in_handler(self, ev):
        # If you hit this you might want to increase
        # the "miss_send_length" of your switch
        if ev.msg.msg_len < ev.msg.total_len:
            self.logger.debug("packet truncated: only %s of %s bytes",
                              ev.msg.msg_len, ev.msg.total_len)
        msg = ev.msg
        datapath = msg.datapath
        ofproto = datapath.ofproto
        parser = datapath.ofproto_parser
        in_port = msg.match['in_port']

        pkt = packet.Packet(msg.data)
        eth = pkt.get_protocols(ethernet.ethernet)[0]

        if eth.ethertype == ether_types.ETH_TYPE_LLDP:
            # ignore lldp packet
            return
        dst = eth.dst
        src = eth.src

        dpid = format(datapath.id, "d").zfill(16)
        self.mac_to_port.setdefault(dpid, {})

        self.logger.info("packet in %s %s %s %s", dpid, src, dst, in_port)

        # learn a mac address to avoid FLOOD next time.
        self.mac_to_port[dpid][src] = in_port

        if dst in self.mac_to_port[dpid]:
            out_port = self.mac_to_port[dpid][dst]
        else:
            out_port = ofproto.OFPP_FLOOD

        actions = [parser.OFPActionOutput(out_port)]\

        actions_timeout=[]

        # install a flow to avoid packet_in next time
        if out_port != ofproto.OFPP_FLOOD:
            match = parser.OFPMatch(in_port=in_port, eth_dst=dst, eth_src=src)
            # verify if we have a valid buffer_id, if yes avoid to send both
            # flow_mod & packet_out
            hard_timeout=10
            if msg.buffer_id != ofproto.OFP_NO_BUFFER:
                self.add_flow(datapath, 2, match,actions_timeout, msg.buffer_id,hard_timeout=10)
                self.add_flow(datapath, 1, match, actions, msg.buffer_id)
                return
            else:
                self.add_flow(datapath, 2, match, actions_timeout, hard_timeout=10)
                self.add_flow(datapath, 1, match, actions)
        data = None
        if msg.buffer_id == ofproto.OFP_NO_BUFFER:
            data = msg.data

        out = parser.OFPPacketOut(datapath=datapath, buffer_id=msg.buffer_id,
                                  in_port=in_port, actions=actions, data=data)
        datapath.send_msg(out)

  • 运行结果

  • 交换机流表项截图

sudo ovs-ofctl -O OpenFlow13 dump-flows s1

标签：控制器,parser,datapath,id,msg,开源,ofproto,RYU,port
From： https://www.cnblogs.com/a159357/p/16837784.html

相关文章

  • 实验6：开源控制器实践——RYU
    一、实验目的能够独立部署RYU控制器；能够理解RYU控制器实现软件定义的集线器原理；能够理解RYU控制器实现软件定义的交换机原理。二、实验环境Ubuntu20.04Desktopamd6......
  • 开源Linux拥抱车载娱乐系统
    AppleCarPlay和AndroidAuto已经开始角力争夺车载娱乐系统市场，而现在开源Linux在也开始在该领域中发力。AutoMotiveGradeLinux（AGL）项目宣布UnifiedCodeBase2.0，致力于......
  • 实验6：开源控制器实践——RYU
    实验6：开源控制器实践——RYU一、实验目的能够独立部署RYU控制器；能够理解RYU控制器实现软件定义的集线器原理；能够理解RYU控制器实现软件定义的交换机原理。二、实验......
  • 实验6：开源控制器实践——RYU
    基本要求搭建下图所示SDN拓扑，协议使用OpenFlow1.0，并连接Ryu控制器，通过Ryu的图形界面查看网络拓扑。生成拓扑sudomn--topo=single,3--controller=remote,ip=127.......
  • 实验6：开源控制器实践——RYU
    实验6：开源控制器实践——RYU一、实验目的能够独立部署RYU控制器；能够理解RYU控制器实现软件定义的集线器原理；能够理解RYU控制器实现软件定义的交换机原理。二、实验......
  • 实验6：开源控制器实践——RYU
    实验6：开源控制器实践——RYU一、实验目的能够独立部署RYU控制器；能够理解RYU控制器实现软件定义的集线器原理；能够理解RYU控制器实现软件定义的交换机原理。二、实验环......
  • 实验6：开源控制器实践——RYU
    实验6：开源控制器实践——RYU一、实验目的能够独立部署RYU控制器；能够理解RYU控制器实现软件定义的集线器原理；能够理解RYU控制器实现软件定义的交换机原理。二、实验......
  • 实验6：开源控制器实践——RYU
    （一）基本要求1.搭建下图所示SDN拓扑，协议使用OpenFlow1.0，并连接Ryu控制器，通过Ryu的图形界面查看网络拓扑。启动RYU控制器ryu-manager../ryu/ryu/app/gui_topology/gui_t......
  • 实验6：开源控制器实践——RYU
    一、实验目的能够独立部署RYU控制器；能够理解RYU控制器实现软件定义的集线器原理；能够理解RYU控制器实现软件定义的交换机原理。二、实验环境Ubuntu20.04Desktopamd6......
  • 实验6：开源控制器实践——RYU
    实验6：开源控制器实践——RYU一、实验目的能够独立部署RYU控制器；能够理解RYU控制器实现软件定义的集线器原理；能够理解RYU控制器实现软件定义的交换机原理。二、实验......

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99