COMP3811 Computer GraphicsModule code

标签：code GraphicsModule should will Computer report your must

School of Computing: assessment brief Module title Computer GraphicsModule code COMP3811

Assignment title Coursework 1Assignment type

and description Programming assignment: Graphics fundamentalsRationale The coursework revolves around fundamental graphicsoperations and data types. Theseinclude images and themanipulation thereof, drawing primitives such as linesand triangles, and blitting images.Page limit and guid

ance Report: 8 A4 pages with 2cm or larger margins, 10ptfont size (including figures). You are allowed to use adouble-column layout. Code: no limit. Please read the submission instructions carefully!

Weighting

50%Submission deadline 2024-11-07 14:00

Submission method Gradescope: code and report

Feedback provision Written notes

Learning outcomes assessed

Understanding, description and utilization of standardmethods to programmatically create and manipulateimages. Understanding, description, application andevaluation of fundamental algorithms and methods incomputer graphics.

Module lead

Markus Billeter

i1. Assignment guidance

In the first coursework, you are tasked with implementing several drawing functionsfor primitive graphics operations. These include drawing lines, triangles and blittingimages. You will verify that these functions work correctly and analyze their behaviour.Before starting your work, please study the coursework document in its entirety. Pay special attention to the requirements and submission information. Plan your work. It might be better to focus on a subset of tasks and commit to these fully than to attempt everything in a superficial way.

2. Assessment tasksPlease see detailed instructions in the document following the standardized assessmentbrief (pages i-iv). The work is split into several tasks, accounting for 50% of the totalmodule grade.

3. General guidance and study supportPlease refer to materials handed out during the module, specifically the tutorial-styleexercises for 2D graphics and maths.Support is primarily provided during scheduled lab hours. Support for general issuesmay be provided through the module’s “Teams” channel. Do not expect answersoutside of scheduled hours. Do not post specific issues relating to your code in thepublic Teams channels. Do not crosspost across multiple channels.

4. Assessment criteria and marking processSubmissions take place through Gradescope. Valid submissions will be markedprimarily based on the report and secondarily based on the submitted code. Seefollowing sections for details on submission requirements and on requirements onthe report. Marks and feedback will be provided through Minerva (and not throughGradescope - Gradescope is only used for submissions!).

5. Submission requirementsYour coursework will be graded once you have(a) Submitted required files (code and report) through Gradescope.

(b) If deemed necessary, participated in an extended interview with the instructor(s)where you explain your submission in detail.Your submission will consist of sourcecode and a report (≲ 8 pages). The report is the basis for assessment. The source code is supporting evidence for claims made in the report. Tasks/results withoutsupporting code will receive zero marks. Submissions are made through Gradescope (do not send your solutions by email!).

You can use any of Gradescope’s mechanisms for uploading the complete solutionand report. In particular, Gradescope accepts .zip archives (you should seeheiicontents of them when uploading to Gradescope). Do not use other archive formats

(Gradescope must be able to unpack them!). 代写 COMP3811 Computer GraphicsModule code Gradescope will run preliminary checkson your submission and indicate whether it is considered a valid submission.Thesource code must compile and run as submitted on the standard SoC machinesfound in the UG teaching lab (2.05 in Bragg). Your code must compile cleanly, i.e.,

it should not produce any warnings. If there are singular warnings that you cannot

resolve or believe are in error, you must list these in your report and provide an

explanation of what the warning means and why it is acceptable in your case. This iot applicable for easily fixed problems and other bulk warnings (for example, type

nversions) – you are always expected to correct the underlying issues for such. Do

ot change the warning level defined in the handed-out code. Disabling individual

arnings through various means will still require documenting them in the report.

Your submission must not include any “extra” files that are not required to build

or run your submission (aside from the report). In particular, you must not include

build artifacts (e.g. final binaries, .o files, ...), temporary files generated by your IDE

or other tools (e.g. .vs directory and contents) or files used by version control (e.g.

.git directory and related files). Note that some of these files may be hidden by

default, but they are almost always visible when inspecting the archive with varioools. Do not submit unused code (e.g. created for testing). Submitting unnecessaryfiles may result in a deduction of marks.While you are encouraged to use version control software/source code management

software (such as git or subversion), you must not make your solutions publicly

available. In particular, if you wish to use Github, you must use a private repository.

You should be the only user with access to that repository.

6. Presentation and referencing

Your report must be a single PDF file called report.pdf. In the report, you must listall tasks that you have attempted and describe your solutions for each task. Include screenshots for each task unless otherwise noted in the task description! You mayefer to your code in the descriptions, but descriptions that just say “see sourcecode” are not sufficient. Do not reproduce bulk code in your report. If you wish tohighlight a particularly clever method, a short snippet of code is acceptable. Nevershow screenshots/images of code - if you wish to include code, make sure it is renderedas text in the PDF using appropriate formatting and layout. Screenshotsmust beof good quality (keep the resolution at 1280×720 or higher, but scale them downin the PDF). Don’t compress the screenshots overly much (e.g., visible compressionartifacts)pply good report writing practices. Structure your report appropriately. Use wholeEnglish sentences. Use appropriate grammar, punctuation and spelling. Provide figureaptions to figures/screenshots, explaining what the figure/screenshot is showingandwhat the reader should pay attention to. Refer to figures from your main text. Citeexternal references appropriately.iiFurthermore, the UoL standard practices apply:

The quality of written English will be assessed in this work. As a minimum, you mustensure:

• Paragraphs are used
• There are links between and within paragraphs although these may be ineffectiveat times

• There are (at least) attempts at referencing
• Word choice and grammar do not seriously undermine the meaning and comprehensibility of the argument

• Word choice and grammar are generally appropriate to an academic textThese are pass/ fail criteria. So irrespective of marks awarded elsewhere, if you donot meet these criteria you will fail overall.

7. Academic misconduct and plagiarismYou are encouraged to research solutions and use third-party resources. If you findsuch, you must provide a reference to them in your report (include information about

the source and original author(s)). Never “copy-paste” code from elsewhere – all codemust be written yourself. If the solution is based on third party code, make sure toindicate this in comments surrounding your implementation in your code, in additionto including a reference in your report. It is expected that you fully understandall code that you hand in as part of your submission. You may be asked to explain any such code as part of the marking process. If deemed necessary, you may be asked to attend a short individual interview with the instructor(s), where you are asked to explain specific parts of your submission. urthermore, the UoL standard practices apply:Academic integrity means engaging in good academic practice. This involves essentialacademic skills, such as keeping track of where you find ideas and information andreferencing these accurately in your work.By submitting this assignment you are confirming that the work is a true expressionof your own work and ideas and that you have given credit to others where their workhas contributed to yours.

Assessment/marking criteria grid

(See separate document.)

ivCOMP3811

Coursework 1

Contents

1 Tasks

1

1.1 Setting Pixels . . . . . . .

2

1.2 Drawing Lines . . . . . .

2

1.3 2D Rotation . . . . . . .

3

1.4 Drawing triangles . . . .

4

1.5 Blitting images . . . . . .

4

1.6 Testing: lines . . . . . . .

4

1.7 Testing: triangles . . . .

5

1.8 Benchmark: Blitting . . .

5

1.9 Benchmark: Line drawing

6

1.10 Your own space ship . .

6

Coursework 1 focuses on basic graphics operations in 2D, including manipulating images, drawing lines and

triangles, and

blitting images. Coursework 1 is to be solved individually and determines 50% of the total

mark for COMP3811.

Before starting work on the tasks below, study this document in its entirety. Plan your work. It is likely better

to focus on a subset of tasks and commit to these fully than to attempt everything in a superficial way. For the

purpose of planning, you may consider tasks in Sections 1.6 to 1.9 to be (more) advanced tasks. You may want

to hold off on these until you have completed other tasks.

While you are encouraged to use version control software/source code management software (such as git or subversion),

you must not make your solutions publicly available. In particular, if you wish to use Github, you must use a private

repository. You should be the only user with access to that repository.

You are allowed to discuss ideas with your colleagues. However, do not share your code with anybody else.

You must program independently and not base your submission on any code other than what has been pro

vided with the coursework and/or in the exercises for COMP3811. As a special exception, you may reuse code

from COMP3811 exercises that was handed out (including briefs) or that you are the sole author of.

Use good commenting practices to explain your approach and solution. Good, thoughtful and well-written

comments will help you show that you understand your code. It will also decrease the chances of accidentally

ending up with submissions similar to other’s work.

Coursework 1 will not require you to use any third-party software outside of what is included in the handed

out code. You are therefore not allowed to use additional third-party libraries.

1 Tasks

Start by downloading the Coursework 1 base code. Make sure you are able to build it. If necessary, refer to the

first exercise handed out in COMP3811. It uses the same base structure and includes detailed instructions to

get you started.

The Coursework 1 base code includes several subprojects. Some of them you will have already encountered

in exercises. Others are specific to the coursework.2

COMP3811 - Coursework 1

• main, a program which combines elements from all tasks to draw a game-like 2D environment.
• draw2d, a library where you implement the various drawing functions.
• vmlib, a library for linear algebra/math-related functions.
• support, a library with some helper functions relating to setup and on-screen display.
• lines-sandbox, a simple graphical program that only draws lines. Use it for quick visual testing.
• lines-test, a program for automated tests relating to line drawing.
• lines-benchmark, a program for automated benchmarks relating to line drawing.
• triangles-sandbox, a graphical program that only draws triangles. Use it for quick visual testing.
• triangles-test, a program for automated tests relating to triangle drawing.
• blit-benchmark, a program for automated benchmarks relating to image blitting.
• x-*, which correspond to the various third-party libraries. Unlike the other subprojects, these are not

defined in the main premake5.lua, but rather in third party/premake5.lua.

Although the teaser image looks somewhat like a screenshot from a game, quite a few things that make a

game are missing. This includes functionality like collision detection, sound, game logic, AI, networking, etc

etc. However, most importantly for COMP3811, there are several graphics subroutines whose implementations

are missing as well. Each task that you complete will progress you from the initial empty black screen towards

the teaser image shown on the first page in this document.

Coursework 1 includes tasks for a maximum of 50 marks. Each of the tasks below indicates the maximum

number of marks that you can receive for it. Grading of each task is assessed based on the descriptions and

analysis in your report and further assessed based on: code quality, including correctness, clarity, commenting

and efficiency. Your code must work in both debug and release modes.

1.1 Setting Pixels

2 marks

Drawing anything on screen ultimately requires you to set a specific pixel to a specific color. In this first task,

you will implement helper functions to do so. Any drawing from here on out will use these helpers, specifically

the Surface:set_pixel_srgb method.

Consider the Surface::set_pixel_srgb and Surface::get_linear_index methods. These are declared in

the Surface class in draw2d/surface.hpp and defined in draw2d/surface.inl. Implement the two

functions in draw2d/surface.inl.

The pixel coordinate (0, 0) must correspond to the bottom-left corner in the window.

The Surface class uses a RGBx image format, where each color component is stored in a single 8-bit unsigned

integer (std::uint8_t). You may set the fourth component (“x”) to zero. It is included to pad each pixel to be

32-bits but otherwise ignored. The image is stored in row-major order.

Important:

• You are not allowed to change the draw2d/surface.hpp header (and, consequently, you may not

change the interface of the Surface class).

• You must keep the assert()-line as the first line of the Surface::set_pixel_srgb function definition.

Only add new code below it.

These methods are used to draw the background particle field. Refer to Figure 1 for possible results. You can

move around by first tapping space to enter piloting mode (your mouse cursor should turn into a crosshair),

moving the mouse cursor in the direction you wish to accelerate, and then pressing and holding the right

mouse button to accelerate. Tapping space bar a second time will exit the piloting mode.

In your report: Include a screenshot of the particle field. Make sure that the particles are visible (if necessary,

add a scaled-up cut-out image).

1.2 Drawing Lines

8 marks

Next, consider the function draw_line_solid. The function is declared in the draw2d/draw.hpp header

and defined in the draw2d/draw.cpp source file. The function is supposed to draw a solid single-color line

between the points aBegin and aEnd. The color of the line is specified by the function’s final argument.

Implement the draw_line_solid function. The goal is to produce a line that is as thin as possible (single pixel

width) and that does not have any holes (i.e., each pixel should connect to another pixel either by nearest

neighbours or by diagonals). Recall the parametrised version of a line as a starting point. You should ensureCOMP3811 - Coursework 1

3

(a) Background “starfield”

(b) Magnified view

Figure 1: Task 1. You might need to zoom in to the left image in your PDF viewer to see the individual points. The right

image shows a magnified view of the top-left region.

that the function produces correct results with all inputs, including cases where the line extends off-screen (so,

you must include clipping). You may pick any drawing method, but it should scale with O (N) with respect to

the number of drawn pixels (N). You should not make any dynamic allocations (nor any system calls) in the

line drawing method.

The handed-out code contains two additional programs related to your line drawing. Use lines-sandbox

to visually verify your results in isolation. It includes a small number of examples already. You can switch

between the examples using the number keys. See source code comments for more information. You are free

to add additional examples.

The second program, lines-test, runs a few automated tests on the line drawing. It uses the

Catch2

testing library. Ensure that your implementation passes the existing tests. Refer to the source code for more

information on the tests.

Note: You must not change the prototype of the draw_line_solid function, and you must use Surface::▽

▷ set_pixel_srgb to draw pixels.

With the line drawing in place, you should now be able to see a space ship (Figure 2a).

In your report: Explain your line drawing method (as a reminder: do not just dump code into your report).

Document your handling of lines extending off-screen. Include a screenshot of the drawn ship.

1.3 2D Rotation

2 marks

The space ship initially always faces to the right. To make it turn, you must implement a few functions related

to the 2 × 2 matrices:

• Matrix-matrix multiplication: Mat22f operator*( Mat22f const&, Mat22f const& ) noexcept
• Matrix-vector multiplication: Vec2f operator*( Mat22f const&, Vec2f const& ) noexcept
• Creation of a rotation matrix: Mat22f make_rotation_2d( float aAngleInRadians ) noexcept

The functions are both declared and defined in vmlib/mat22.hpp. Provide implementations for these func

tions/operators. With the implementations in place, the ship should now always face the mouse cursor when

in piloting mode (compare to Figure 2b – the spaceship is facing to the bottom right in this example).

In your report: Include a screenshot of the rotated ship.

(a) Section 1.2

(b) Section 1.3

Figure 2: (a) Space ship without rotation, facing the default direction (right). (b) Space ship with rotation, always facing

the mouse cursor when in piloting mode.4

COMP3811 - Coursework 1

Figure 3: Approaching the earth (lithobraking not yet implemented!).

1.4 Drawing triangles

8 marks

Consider the function draw_triangle_interp. It is also declared in the draw2d/draw.hpp header and de

fined in draw2d/draw.cpp. This function draws a single triangle defined by its three vertices (aP0, aP1 and

aP2). Each vertex is assigned a color (aC0, aC1 and aC2, respectively). These colors should be interpolated

across the triangle with barycentric interpolation. Implement this function. Make sure that the function works

correctly with all (reasonable) inputs.

Unlike earlier examples, the colors are specified in linear RGB (ColorF). You should perform the interpolation

in linear RGB space and only convert to the 8-bit sRGB representation when writing the color value to the

surface.

You can pick any method, but it should be reasonably efficient (e.g., simply testing all pixels in the screen is

not sufficient). You should not make any dynamic allocations or system calls in the triangle drawing method.

Use the triangles-sandbox to visually experiment with your triangle drawing in isolation. Run the tests in

triangles-test and ensure that they pass. When you have implemented the triangle drawing, you should

also be able to see the asteroids in the main program (see teaser image).

Note: You must not change the prototype of the draw_line_solid function, and you must use Surface::▽

▷ set_pixel_srgb to draw pixels.

In your report: Explain your method. Document any special handing that you perform. Include a screenshot

of the main program, with the asteroids visible.

1.5 Blitting images

4 marks

In this task, you will implement image blitting with alpha masking. Consider the blit_masked functiondeclared in draw2d/image.hpp and defined in draw2d/image.cpp. You will also need to implement a

few helper functions in draw2d/image.inl. Search for lines containing the string // TODO.You should blit the input image (aImage of type ImageRGBA) to the position specified by aPosition. Theposition is relative to the center of the input image. Input pixels with an alpha value (a component of theColor_sRGB_Alpha color struct) less than 128 should be discarded. Consider efficiency in your implementationand do not make any dynamic allocations/syscalls (etc etc.).If you have implemented the method correctly, youshould find the earth after flying a bit to the right – it willbe off-screen initially (see teaser image and Figure 3).Note: You must not change the prototype of the blit_masked function. You must not change the ImageRGBAclass and the load_image function.

In your report: Describe your implementation of the blit. Discuss the efficiency of your implementation. Focus

specifically on choices in your implementation that benefit efficiency and the impact of clipping/culling.

1.6 Testing: lines

8 marks

Consider the lines-test program. It contains a few example tests that verify expected behaviour. However,

the tests are far from exhaustive.

Implement tests for the following four scenarios:

1. Consider a line from p0 to p1. It should be identical to the line from p1 to p0.COMP3811 - Coursework 1

5

2. Consider lines with one point inside the surface and one outside.
3. Consider lines with both points outside of the surface.
4. Consider two lines. The first starts at p0 and extends to p1. The second starts at p1 and extends to p2.

When both are drawn, there should be no gap between the two lines. Extend this to multiple lines - what

happens if the lines are very short?

Each scenario must be implemented in a separate TEST_CASE in the corresponding source file (e.g., Scenario 1

is in scenario-1.cpp and so on). Each scenario is expected to test multiple different representative lines, for

which you are required to make informed choices. It is likely you will need multiple assertions per test.If your line drawing implementation fails some of the tests, you should tag the corresponding TEST_CASE with[!mayfail]. Mention this in your report.

In your report: Document which tests you have added. Describe how you have implemented the test (whatdo you actually test?). List what representative lines you have chosen to include in your tests and motivatethe choice of these. Where possible, sketches and/or screenshots (e.g. from lines-sandbox) that show your

representative lines.

1.7 Testing: triangles

4 marks

Add at least two (2) more distinct test cases to the triangles-test program. Refer to Section 1.6 for details –

the same requirements/guidelines apply here. Use the provided scenario-N.cpp files. Make sure the teststhat you add are meaningful.

In your report: Document the tests that you have added. Explain the purpose of each test and why youincluded it. No marks will be awarded for tests that lack an explanation and solid reasoning. If possible,visualize the test case using sketches and/or screenshots (e.g., from triangles-sandbox).

1.8 Benchmark: Blitting

6 marks Compare the performance of your blit (blit_masked) to two more blit variants under different conditions.

For this task, use blit-benchmark which in turn uses

Google’s microbenchmarking library to allow you

to implement these benchmarks. Study the documentation and examples at the provided link. The providedcode implements a simple example that measures theperformance for a simple blit operation.Important: You should only ever benchmark code built in the release configuration. The debug configuratioisables many compiler optimizations (including code inlining!) to aid debugging and is therefore not repre

sentative of the final performance. Hence, when running benchmarks, make sure you only ever use releasebuilds.

Modern CPUs and operating systems also adjust clock rates of the processor based on work load.Many CPUs can additionally boost to higher clock rates for short periods of time. These features areobviously desirable under normal conditions, but make life during benchmarking more difficult.Refer to Benchmarking details below for additional discussion on this topic.ou should first implement the additional blit variants in draw-ex.cpp:

• blit_ex_solid: A blit without alpha masking, where you just copy over the target image pixel by pixel.Implement this yourself using loops in C++.

• blit_ex_memcpy: A blit without alpha masking, but implement this using std::memcpy, one for each

line in the image.

These “extended” functions take a SurfaceEx argument instead of the Surface. The main difference is thatSurfaceEx gives out a raw pointer to the image data; you will need this for (minimally) the std::memcpy▽

▷ -based variant. Study the declaration of SurfaceEx for details.Before performing any benchmarks, you should ensure that the variants work correctly. There is no point inbenchmarking incorrect code.

Benchmark the performance under different conditions. Perform comparisons with a smaller (e.g., 128×128)

and a larger (e.g.,1024×1024) input image. Perform comparisons on a smaller framebuffer (320×240), the

default size (1280×720), full HD (1920×1080) and an 8k framebuffer (7680×4320). Vary only one variable at atime. (However, the benchmark program should run all variants automatically.)6

COMP3811 - Coursework 1

Analyze your results. Do they seem realistic/reasonable? What are your observations? Can you explain whatou see?

In your report: Mention what CPU you are running on. If you know, include information about your systemRAM (amount and speed) and CPU caches. Present your results using graphs/plots (do not dump outputfrom the terminal or -worse- screenshots of the terminal output in the report!). What are your observations?Try to explain what you have seen.Marks are mainly awarded for a solid analysis and discussion of the results. No marks are awarded for justshowing the results. Do not forget to include units on axes/reported numbers.

1.9 Benchmark: Line drawing

7 marks Use the lines-benchmark program. Refer to Section 1.8 for details on the benchmarking application.For this task, implement a second line drawing algorithm in draw_ex_line_solid() (in draw-ex.cpp). You

can chose from the following options for this:

• Research an optimized line drawing method. It should be based on existing (technical) literature thatyou can reference.

• If you previously implemented a method like DDA (with floating point), aim for an integer-only method(e.g. Bresenham). If you already implemented an integer-only method, then implement a standard DDAwith floats1 .

• Come up with a potential optimization yourself? It must be non-trivial. If you opt for this, your choicemust be approved by the module leader - discuss your choice with the module leader during one of thelabs. You will be required to provide a solid theoretical reason why this optimization would improveperformance. This should also be included in the report.

Your improved method may use the SurfaceEx class.Next, identify a few (3-4) different representative lines to benchmark. You are fairly free in your choices here,

but you are expected to motivate your choices later. The cases should differ from each other conceptually. Also

perform the tests with different framebuffer sizes (see Section 1.8). Again, vary only one variable at a time.

Use the tests to verify that your line drawing performs like O (N) with respect to visible pixels.

In your report: Mention which line drawing algorithms you compare and highlight their differences. Doc

ument your representative lines and explain why you have picked these cases. Highlight what you believe

distinguishes them from each other. Present your results using graphs/plots (do not dump output from the

terminal or -worse- screenshots of the terminal output in the report!) Evaluate and analyze these. Discussthem and try to explain what you have seen. What are yourconclusions? Marks are mainly awarded for asolid analysis and discussion of the results.

If you haven’t already (Section 1.8), mention what CPU you are running on. If you know, include informationabout your system RAM (amount and speed) and CPU caches.Marks are mainly awarded for a solid analysis and discussion of the results. No marks are awarded for justshowing the results. Do not forget to include units on axes/reported numbers.

1.10 Your own space ship

1 mark

The default space ship shape is defined in main/spaceship.cpp. It consists of a number of points that are

connected by lines.Define your own custom space ship (see instructions in the source code). You must not use more than 32points. The ship shape must show some amount of complexity and creativity. In your report, indicate if you

e created a custom design and include a screenshot of your custom ship.Please indicate in the source code (see comments) whether you would allow us to use your ship shape infuture iterations of the COMP3811 module (for example as non-player ships). Your choice here does not affectthe marking of this task.1In real-time graphics, we typically avoid doubles. They cost twice as much storage, may be significantly slower to compute, and theextra precision is seldom needed. In fact, thereare often better methods to improve precision than just reaching for a more expensive type.COMP3811 - Coursework 17

In your report: Include a screenshot of your ship. Briefly explain your design and mention the number of

ines/points you used.

Wrapping up

Please double-check the submission requirements and ensure that your submission conforms to these. In

particular, pay attention to file types (archive format and report format) and ensure that you have not included

any unnecessary files in the submission. Make sure that you have tested your code (compile and run) in both

debug and release modes.

Acknowledgements

The document uses icons fromhttps://icons8.com:

, , .. The “free” license requires attribution in documents that use the icons.Note that each icon is a link to the original source thereof.

Benchmarking details

As mentioned previously in this document, CPU frequency scaling can make benchmarking results less reliable. There are some tricks that may help.A common workaround is to “warm up the CPU” by running a computationally heavy task for a short whilebefore starting measurements. The computational load will cause the OS to transition the CPU to a higherclock rate. The main measurements should only take place after this warm up.Google Benchmark seems to run benchmarks in the order they are declared (at least when using a single file).You can try to add a dummy benchmark at the start, whose results you discard, before running the mainbenchmarks. You can also try reordering individual benchmarks. If the results stay the same or very close, itis a good sign.A better way would be to disable the CPU frequency scaling temporarily. Unfortunately, this is not alwayspossible (it requires superuser privilege, which you probably shouldn’t have on the SoC computers).Nevertheless, if you have your own Linux machine, you can run the following (it requires the cpupower tool):

$ cpupower frequency-info

analyzing CPU 0:

driver: acpi-cpufreq

...available cpufreq governors: ondemand userspace powersave performance schedutilcurrent policy: frequency should be within 2.20 GHz and 3.70 GHz.

The governor "schedutil" may decide which speed to usewithin this range.

...This lists the current CPU frequency governor (here: shedutil) and available governors. We’re interested inthe performance governor, which simply runs at the max clock rate the CPU supports. You can activate it

with (this probably requires superuser access):$ sudo cpupower frequency-set -g performance

Password: hunter2Setting cpu: 0

...Setting cpu: 11

Following CPUs are offline:12-15cpupower set operation was not performed on them(The exact output will depend on your CPU. If you have them, don’t worry about the “offline” CPUs, theselikely correspond to cores that were disabled at the factory.) the tests with the “performance” governor.After you complete the tests, you will want to switch back to your default governor (here: “schedutil”). Using

the “performance” governor for an extended time will likely make your CPU waste power and may causedevices like laptops to run hot.

标签：code,GraphicsModule,should,will,Computer,report,your,must
From： https://www.cnblogs.com/goodlunn/p/18504292