首页 > 其他分享 >手动部署JumpServer

手动部署JumpServer

时间：2024-09-26 12:53:10浏览次数：8  
标签：py3 sdp guacamole 部署 手动 dev JumpServer jumpserver root

一、环境配置

[root@sdp-dev ~]# getenforce
Disabled
[root@sdp-dev ~]# systemctl stop firewalld.service
# 修改字符集，否则可能报 input/output error的问题，因为日志里打印了中文
[root@sdp-dev ~]# localedef -c -f UTF-8 -i zh_CN zh_CN.UTF-8
[root@sdp-dev ~]# export LC_ALL=zh_CN.UTF-8
[root@sdp-dev ~]# echo 'LANG="zh_CN.UTF-8"' > /etc/locale.conf
[root@sdp-dev ~]# yum -y install wget sqlite-devel xz gcc automake zlib-devel openssl-devel epel-release git

# 编译安装，否则后面安装python依赖库时可能会有麻烦
[root@sdp-dev ~]# wget https://www.python.org/ftp/python/3.6.1/Python-3.6.1.tar.xz  #尽量使用最新版本，否则部分依赖包无法下载
[root@sdp-dev ~]# tar xf Python-3.6.1.tar.xz  && cd Python-3.6.1
[root@sdp-dev Python-3.6.1]#  ./configure && make && make install

# 安装python虚拟环境
[root@sdp-dev Python-3.6.1]# cd /opt
[root@sdp-dev opt]# python3 -m venv py3
[root@sdp-dev opt]# source /opt/py3/bin/activate
(py3) [root@sdp-dev opt]#

# 使用懒人 autoenv 配置虚拟环境
(py3) [root@sdp-dev opt]# git clone git://github.com/kennethreitz/autoenv.git
正克隆到 'autoenv'...
remote: Enumerating objects: 671, done.
remote: Total 671 (delta 0), reused 0 (delta 0), pack-reused 671
接收对象中: 100% (671/671), 103.92 KiB | 115.00 KiB/s, done.
处理 delta 中: 100% (356/356), done.
(py3) [root@sdp-dev opt]#
(py3) [root@sdp-dev opt]# echo 'source /opt/autoenv/activate.sh' >> ~/.bashrc
(py3) [root@sdp-dev opt]# source ~/.bashrc

二、下载Jumpserver

(py3) [root@sdp-dev opt]# git clone https://github.com/jumpserver/jumpserver.git && cd jumpserver && git checkout master
正克隆到 'jumpserver'...
remote: Enumerating objects: 79, done.
remote: Counting objects: 100% (79/79), done.
remote: Compressing objects: 100% (68/68), done.
remote: Total 41282 (delta 19), reused 20 (delta 5), pack-reused 41203
接收对象中: 100% (41282/41282), 52.05 MiB | 79.00 KiB/s, done.
处理 delta 中: 100% (28176/28176), done.
已经位于 'master'
(py3) [root@sdp-dev jumpserver]#

三、安装所需的python modules

(py3) [root@sdp-dev jumpserver]#  echo "source /opt/py3/bin/activate" > /opt/jumpserver/.env
(py3) [root@sdp-dev jumpserver]# cd requirements/
autoenv:
autoenv: WARNING:
autoenv: This is the first time you are about to source /opt/jumpserver/.env:
autoenv:
autoenv:   --- (begin contents) ---------------------------------------
autoenv:     source /opt/py3/bin/activate$
autoenv:
autoenv:   --- (end contents) -----------------------------------------
autoenv:
autoenv: Are you sure you want to allow this? (y/N) y
(py3) [root@sdp-dev requirements]#

(py3) [root@sdp-dev requirements]#  yum -y install $(cat rpm_requirements.txt)
(py3) [root@sdp-dev requirements]# pip install --upgrade pip
(py3) [root@sdp-dev requirements]#  pip install -r requirements.txt  -i https://pypi.tuna.tsinghua.edu.cn/simple

四、安装Redis

(py3) [root@sdp-dev requirements]#  yum -y install redis
(py3) [root@sdp-dev requirements]#  systemctl enable redis
Created symlink from /etc/systemd/system/multi-user.target.wants/redis.service to /usr/lib/systemd/system/redis.service.
(py3) [root@sdp-dev requirements]# systemctl start redis

五、安装MySQL

(py3) [root@sdp-dev requirements]# yum -y install mariadb mariadb-devel mariadb-server
(py3) [root@sdp-dev requirements]# systemctl enable mariadb
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.
(py3) [root@sdp-dev requirements]# systemctl start mariadb
(py3) [root@sdp-dev requirements]#

(py3) [root@sdp-dev requirements]# mysql
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 2
Server version: 5.5.60-MariaDB MariaDB Server

Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MariaDB [(none)]>  create database jumpserver default charset 'utf8';
Query OK, 1 row affected (0.00 sec)

MariaDB [(none)]> grant all on jumpserver.* to 'jumpserveradmin'@'127.0.0.1' identified by 'jumpserverpwd';
Query OK, 0 rows affected (0.00 sec)

MariaDB [(none)]> flush privileges;
Query OK, 0 rows affected (0.00 sec)

MariaDB [(none)]> \q
Bye
(py3) [root@sdp-dev requirements]#

六、配置Jumpserver

(py3) [root@sdp-dev requirements]# pwd
/opt/jumpserver/requirements
(py3) [root@sdp-dev requirements]# cd ..
(py3) [root@sdp-dev jumpserver]# ls
apps      config_example.yml  Dockerfile  entrypoint.sh  LICENSE  README_EN.md  requirements   tmp
build.sh  data                docs        jms            logs     README.md     run_server.py  utils
(py3) [root@sdp-dev jumpserver]# cp config_example.yml config.yml
(py3) [root@sdp-dev jumpserver]#
(py3) [root@sdp-dev jumpserver]# SECRET_KEY=`cat /dev/urandom | tr -dc A-Za-z0-9 | head -c 50`
(py3) [root@sdp-dev jumpserver]# echo $SECRET_KEY
vFjo4WEMRWNinXMconEXodf3VeEaRStkDzo6SpIfNxphYEEMUZ
(py3) [root@sdp-dev jumpserver]# echo "SECRET_KEY=$SECRET_KEY" >> ~/.bashrc
(py3) [root@sdp-dev jumpserver]# BOOTSTRAP_TOKEN=`cat /dev/urandom | tr -dc A-Za-z0-9 | head -c 16`
(py3) [root@sdp-dev jumpserver]# echo "BOOTSTRAP_TOKEN=$BOOTSTRAP_TOKEN" >> ~/.bashrc
(py3) [root@sdp-dev jumpserver]# echo $BOOTSTRAP_TOKEN
yBCVQ9WHA9phTZ21
(py3) [root@sdp-dev jumpserver]# sed -i "s/SECRET_KEY:/SECRET_KEY: $SECRET_KEY/g" /opt/jumpserver/config.yml
(py3) [root@sdp-dev jumpserver]# sed -i "s/BOOTSTRAP_TOKEN:/BOOTSTRAP_TOKEN: $BOOTSTRAP_TOKEN/g" /opt/jumpserver/config.yml
(py3) [root@sdp-dev jumpserver]# sed -i "s/# DEBUG: true/DEBUG: false/g" /opt/jumpserver/config.yml
(py3) [root@sdp-dev jumpserver]# sed -i "s/# LOG_LEVEL: DEBUG/LOG_LEVEL: ERROR/g" /opt/jumpserver/config.yml
(py3) [root@sdp-dev jumpserver]#  sed -i "s/# SESSION_EXPIRE_AT_BROWSER_CLOSE: false/SESSION_EXPIRE_AT_BROWSER_CLOSE: true/g" /opt/jumpserver/config.yml
(py3) [root@sdp-dev jumpserver]# echo -e "\033[31m 你的SECRET_KEY是 $SECRET_KEY \033[0m"
 你的SECRET_KEY是 vFjo4WEMRWNinXMconEXodf3VeEaRStkDzo6SpIfNxphYEEMUZ
(py3) [root@sdp-dev jumpserver]# echo -e "\033[31m 你的BOOTSTRAP_TOKEN是 $BOOTSTRAP_TOKEN \033[0m"
 你的BOOTSTRAP_TOKEN是 yBCVQ9WHA9phTZ21
(py3) [root@sdp-dev jumpserver]# vi config.yml
(py3) [root@sdp-dev jumpserver]# sed -n '/^DB_/p' /opt/jumpserver/config.yml
DB_ENGINE: mysql
DB_HOST: 127.0.0.1
DB_PORT: 3306
DB_USER: jumpserveradmin
DB_PASSWORD: jumpserverpwd
DB_NAME: jumpserver
(py3) [root@sdp-dev jumpserver]#

七、启动/关闭Jumpserver

(py3) [root@sdp-dev jumpserver]# ./jms start
......

(py3) [root@sdp-dev jumpserver]# ./jms stop
Stop service: gunicorn
Stop service: celery
Stop service: beat
(py3) [root@sdp-dev jumpserver]#

后台启动

(py3) [root@sdp-dev jumpserver]# ./jms start -d

八、部署koko

支持终端管理，默认port为2222

1.docker部署

[root@sdp-dev ~]# systemctl start docker
[root@sdp-dev ~]#
[root@sdp-dev ~]# Server_IP=192.168.20.32
[root@sdp-dev ~]# BOOTSTRAP_TOKEN=yBCVQ9WHA9phTZ21
[root@sdp-dev ~]# docker run --name jms_koko -d -p 2222:2222 -p 5000:5000 -e CORE_HOST=http://$Server_IP:8080 -e BOOTSTRAP_TOKEN=$BOOTSTRAP_TOKEN jumpserver/jms_koko:1.5.5
Unable to find image 'jumpserver/jms_koko:1.5.5' locally
1.5.2: Pulling from jumpserver/jms_koko
050382585609: Pull complete
f6e2d22aa00f: Pull complete
8c86c00c5332: Pull complete
6b9c6941a89d: Pull complete
a10054b94acf: Pull complete
4005724a64ff: Pull complete
446406ca2953: Pull complete
716a981c63ee: Pull complete
41a65efed49e: Pull complete
Digest: sha256:ac6258fe46165860289410970e124031aa74a380cb3e1ad97348feb2c9265cbc
Status: Downloaded newer image for jumpserver/jms_koko:1.5.5
31fc5862ea104946590c232f16dab366d55823e559e256c5208a3720be9406ba
[root@sdp-dev ~]#

2.手工部署koko (coco 目前已经被 koko 取代)

cd /opt
wget https://github.com/jumpserver/koko/releases/download/1.5.2/koko-master-37daa82-linux-amd64.tar.gz
tar xf koko-master-37daa82-linux-amd64.tar.gz
chown -R root:root kokodir
cd kokodir
chown -R root:root /opt/kokodir
cd /opt/kokodir
cp config_example.yml config.yml
vim config.yml  # BOOTSTRAP_TOKEN 需要从 jumpserver/config.yml 里面获取, 保证一致
./koko

九、部署guacamole

基于 HTML 5 和 JavaScript 的 VNC 查看器

[root@sdp-dev ~]# docker run --name jms_guacamole -d -p 8081:8081 -e JUMPSERVER_SERVER=http://$Server_IP:8080 -e BOOTSTRAP_TOKEN=$BOOTSTRAP_TOKEN jumpserver/jms_guacamole:1.5.5
Unable to find image 'jumpserver/jms_guacamole:1.5.5' locally
1.5.5: Pulling from jumpserver/jms_guacamole
8ba884070f61: Pull complete
74b389e6937e: Pull complete
41f5461bfc2f: Pull complete
f693f2484212: Pull complete
246835158fe4: Pull complete
Digest: sha256:de0b74e33c9991181eb507d768df73fb05932f3b4722dc36ecdca4e358fdce8d
Status: Downloaded newer image for jumpserver/jms_guacamole:1.5.5
f4d0c314c5fb840e42ea7e284f5349c571039bb1e3af2f3f8377b7a2c5f53f82
[root@sdp-dev ~]#

手工部署guacamole　　

$ cd /opt
$ git clone --depth=1 https://github.com/jumpserver/docker-guacamole.git
$ cd /opt/docker-guacamole
$ tar xf guacamole-server-1.0.0.tar.gz
$ cd /opt/docker-guacamole/guacamole-server-1.0.0
# 根据 http://guacamole.apache.org/doc/gug/installing-guacamole.html 文档安装对应的依赖包
$ autoreconf -fi
$ ./configure --with-init-dir=/etc/init.d
$ make
$ make install

# 访问 https://tomcat.apache.org/download-90.cgi 下载最新的 tomcat9
$ mkdir -p /config/guacamole /config/guacamole/lib /config/guacamole/extensions /config/guacamole/data/log/
$ cd /config
$ wget http://mirrors.tuna.tsinghua.edu.cn/apache/tomcat/tomcat-9/v9.0.22/bin/apache-tomcat-9.0.22.tar.gz
$ tar xf apache-tomcat-9.0.22.tar.gz
$ mv apache-tomcat-9.0.22 tomcat9
$ rm -rf /config/tomcat9/webapps/*
$ sed -i 's/Connector port="8080"/Connector port="8081"/g' /config/tomcat9/conf/server.xml
$ echo "java.util.logging.ConsoleHandler.encoding = UTF-8" >> /config/tomcat9/conf/logging.properties
$ ln -sf /opt/docker-guacamole/guacamole-1.0.0.war /config/tomcat9/webapps/ROOT.war
$ ln -sf /opt/docker-guacamole/guacamole-auth-jumpserver-1.0.0.jar /config/guacamole/extensions/guacamole-auth-jumpserver-1.0.0.jar
$ ln -sf /opt/docker-guacamole/root/app/guacamole/guacamole.properties /config/guacamole/guacamole.properties
$ wget https://github.com/ibuler/ssh-forward/releases/download/v0.0.5/linux-amd64.tar.gz
$ tar xf linux-amd64.tar.gz -C /bin/
$ chmod +x /bin/ssh-forward

# 设置 guacamole 环境
$ export JUMPSERVER_SERVER=http://127.0.0.1:8080  # http://127.0.0.1:8080 指 jumpserver 访问地址
$ echo "export JUMPSERVER_SERVER=http://127.0.0.1:8080" >> ~/.bashrc

# BOOTSTRAP_TOKEN 为 Jumpserver/config.yml 里面的 BOOTSTRAP_TOKEN 值
$ export BOOTSTRAP_TOKEN=******
$ echo "export BOOTSTRAP_TOKEN=******" >> ~/.bashrc
$ export JUMPSERVER_KEY_DIR=/config/guacamole/keys
$ echo "export JUMPSERVER_KEY_DIR=/config/guacamole/keys" >> ~/.bashrc
$ export GUACAMOLE_HOME=/config/guacamole
$ echo "export GUACAMOLE_HOME=/config/guacamole" >> ~/.bashrc

$ /etc/init.d/guacd start
$ sh /config/tomcat9/bin/startup.sh

十、部署luna

与nginx结合支持Web Terminal前端

[root@sdp-dev ~]# cd /opt/
[root@sdp-dev opt]# wget https://github.com/jumpserver/luna/releases/download/1.5.5/luna.tar.gz
[root@sdp-dev opt]# tar xf luna.tar.gz
[root@sdp-dev opt]# chown -R root:root luna

十一、配置nginx

[root@sdp-dev opt]# cd /usr/local/nginx/conf/
[root@sdp-dev conf]# ls
fastcgi.conf            koi-utf             nginx.conf           uwsgi_params
fastcgi.conf.default    koi-win             nginx.conf.default   uwsgi_params.default
fastcgi_params          mime.types          scgi_params          win-utf
fastcgi_params.default  mime.types.default  scgi_params.default
[root@sdp-dev conf]# mkdir conf.d
[root@sdp-dev conf]# cd conf.d/
[root@sdp-dev conf.d]# vim jumpserver.conf
[root@sdp-dev conf.d]# ls
jumpserver.conf
[root@sdp-dev conf.d]# cat jumpserver.conf
server {
    listen 80;
    # server_name _;
    server_name bastion.qf.com;

    client_max_body_size 100m;  # 录像及文件上传大小限制

    location /luna/ {
        try_files $uri / /index.html;
        alias /opt/luna/;  # luna 路径, 如果修改安装目录, 此处需要修改
    }

    location /media/ {
        add_header Content-Encoding gzip;
        root /opt/jumpserver/data/;  # 录像位置, 如果修改安装目录, 此处需要修改
    }

    location /static/ {
        root /opt/jumpserver/data/;  # 静态资源, 如果修改安装目录, 此处需要修改
    }

    location /koko/ {
        proxy_pass       http://localhost:5000;
        proxy_buffering off;
        proxy_http_version 1.1;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header Host $host;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        access_log off;
    }

    location /guacamole/ {
        proxy_pass       http://localhost:8081/;
        proxy_buffering off;
        proxy_http_version 1.1;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection $http_connection;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header Host $host;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        access_log off;
    }

    location /ws/ {
        proxy_pass http://localhost:8070;
        proxy_http_version 1.1;
        proxy_buffering off;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header Host $host;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        access_log off;
    }

    location / {
        proxy_pass http://localhost:8080;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header Host $host;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        access_log off;
    }
}
[root@sdp-dev conf.d]#
[root@sdp-dev conf.d]# cd ..
[root@sdp-dev conf]# vim nginx.conf
[root@sdp-dev conf]# grep -Pv "^($| *#)" nginx.conf
worker_processes  1;
events {
    worker_connections  1024;
}
http {
    include       mime.types;
    default_type  application/octet-stream;
    sendfile        on;
    keepalive_timeout  65;
    include /usr/local/nginx/conf/conf.d/*.conf;
}
[root@sdp-dev conf]# cd ..
[root@sdp-dev nginx]# sbin/nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
[root@sdp-dev nginx]#

十二、Jumpserver 登录测试

  • # 检查应用是否已经正常运行
  • # 服务全部启动后, 访问 jumpserver 服务器 nginx 代理的 80 端口, 不要通过8080端口访问
  • # 默认账号: admin 密码: admin

十三、快速入门

参考：https://jumpserver.readthedocs.io/zh/master/quick_start.html

系统设置

设置用户访问的URL

手动部署JumpServer_tomcat

设置邮件地址及验证

手动部署JumpServer_tomcat_02

设置邮件内容

手动部署JumpServer_sed_03

配置LDAP

手动部署JumpServer_docker_04

导入LDAP用户

手动部署JumpServer_docker_05

终端设置

手动部署JumpServer_sed_06

安全设置

手动部署JumpServer_sed_07

用户管理

用户组设置

手动部署JumpServer_tomcat_08

用户设置

手动部署JumpServer_sed_09

资产管理

资产管理--管理用户

手动部署JumpServer_tomcat_10

资产管理--系统用户

手动部署JumpServer_tomcat_11

资产管理--网域列表

手动部署JumpServer_tomcat_12

资产管理--资产列表

手动部署JumpServer_tomcat_13

权限管理

手动部署JumpServer_sed_14

 

 

手动部署JumpServer_tomcat_15

会话管理

会话管理--Web终端

手动部署JumpServer_sed_16

 

手动部署JumpServer_docker_17

windows终端

手动部署JumpServer_docker_18

会话管理--命令记录

手动部署JumpServer_docker_19

会话管理--历史记录

手动部署JumpServer_sed_20

会话管理--文件管理

手动部署JumpServer_sed_21

会话管理--终端管理

手动部署JumpServer_sed_22

手动部署JumpServer_sed_23

手动部署JumpServer_sed_24

作业中心

作业中心--批量命令

手动部署JumpServer_sed_25

作业中心--任务列表

手动部署JumpServer_sed_26

日志审计

日志审计--登录日志

手动部署JumpServer_sed_27

日志审计--操作日志

手动部署JumpServer_sed_28

日志审计--批量命令

手动部署JumpServer_docker_29

仪表盘

手动部署JumpServer_sed_30

14、排错

（1）koko 不在线

手动部署JumpServer_docker_31

原因：版本不匹配

解决过程如下：

手动部署JumpServer_tomcat_32

(py3) [root@qa95-devel jumpserver]# Server_IP=`ip addr | grep 'state UP' -A2 | grep inet | egrep -v '(127.0.0.1|inet6|docker)' | awk '{print $2}' | tr -d "addr:" | head -n 1 | cut -d / -f1`
(py3) [root@qa95-devel jumpserver]# docker run --name jms_koko -d -p 2222:2222 -p 127.0.0.1:5000:5000 -e CORE_HOST=http://$Server_IP:8080 -e BOOTSTRAP_TOKEN=$BOOTSTRAP_TOKEN --restart=always jumpserver/jms_koko:1.5.5
Unable to find image 'jumpserver/jms_koko:1.5.5' locally
1.5.5: Pulling from jumpserver/jms_koko
e7c96db7181b: Pull complete
579b06fc1e6a: Pull complete
1a195461e3ce: Pull complete
cb544743625b: Pull complete
ec65f2bdce0b: Pull complete
Digest: sha256:e6c35bd8a9f7be72055be21380344c81c4a6330efa254aabf60b8a4796d508c5
Status: Downloaded newer image for jumpserver/jms_koko:1.5.5
a42306dc4572b58dff389a0d0bf7c62dda0251800039345c17a84cda87734739
(py3) [root@qa95-devel jumpserver]#

然后koko注册成功，并处于在线状态：　　

手动部署JumpServer_sed_33

（2）Guacamole 注册失败

原因：版本不匹配

解决过程如下：

(py3) [root@qa95-devel jumpserver]# docker stop jms_guacamole
jms_guacamole
(py3) [root@qa95-devel jumpserver]# docker rm jms_guacamole
jms_guacamole
(py3) [root@qa95-devel jumpserver]# docker run --name jms_guacamole -d -p 127.0.0.1:8081:8080 -e JUMPSERVER_SERVER=http://$Server_IP:8080 -e BOOTSTRAP_TOKEN=$BOOTSTRAP_TOKEN --restart=always jumpserver/jms_guacamole:1.5.5
Unable to find image 'jumpserver/jms_guacamole:1.5.5' locally
1.5.5: Pulling from jumpserver/jms_guacamole
ab5ef0e58194: Pull complete
edf7bc06322e: Pull complete
2034ec367e45: Pull complete
e75756b89a95: Pull complete
f04c5d071413: Pull complete
2599c3a6a821: Pull complete
52a073ddf64c: Pull complete
805616d72c12: Pull complete
3c40529b36f6: Pull complete
3044f8f99b07: Pull complete
d97561b081f3: Pull complete
Digest: sha256:667651fd4fe9836d6c4121c66cde25095dce966e9610035da512af25cbe00b79
Status: Downloaded newer image for jumpserver/jms_guacamole:1.5.5
71f7e22b7b0e1687b55f79063b3fe9c699286157c1efd361e4a68ee4ad141a95
(py3) [root@qa95-devel jumpserver]#  docker ps
CONTAINER ID        IMAGE                            COMMAND             CREATED             STATUS              PORTS                                              NAMES
71f7e22b7b0e        jumpserver/jms_guacamole:1.5.5   "./entrypoint.sh"   4 minutes ago       Up 4 minutes        127.0.0.1:8081->8080/tcp                           jms_guacamole
a42306dc4572        jumpserver/jms_koko:1.5.5        "./entrypoint.sh"   29 minutes ago      Up 29 minutes       0.0.0.0:2222->2222/tcp, 127.0.0.1:5000->5000/tcp   jms_koko
(py3) [root@qa95-devel jumpserver]#

然后Guacamole注册成功，如下所示：

 

手动部署JumpServer_sed_34

 

排错参考：https://docs.jumpserver.org/zh/docs/faq.html

　　

　　

　　

　　

　　

　　

　

　

　　

 

"一劳永逸" 的话，有是有的，而 "一劳永逸" 的事却极少



标签：py3,sdp,guacamole,部署,手动,dev,JumpServer,jumpserver,root
From： https://blog.51cto.com/u_8901540/12118318

相关文章

  • docker部署jumpserver及入门
    一、环境及要求环境：CentOSLinux7.9jumpserverv2.28.6要求LinuxKernel:>=4.0 MySQL:>=5.7#官方使用MariaDB10.6对照MySQL8.0Redis:>=5.0#不支持cluster模式官方使用Redis6.2SoftRequirement:wgetcurltargettextiptablespythone二、依赖安装1.MySQL......
  • CentOS7.4安装部署openstack [Liberty版] （一）
    一、OpenStack简介OpenStack是一个由NASA（美国国家航空航天局）和Rackspace合作研发并发起的，以Apache许可证授权的自由软件和开放源代码项目。OpenStack是一个开源的云计算管理平台项目，由几个主要的组件组合起来完成具体工作。OpenStack支持几乎所有类型的云环境，项目目标是提供实施简......
  • CentOS7.4安装部署openstack [Liberty版] （二）
    继上一篇博客CentOS7.4安装部署openstack[Liberty版]（一），本篇继续讲述后续部分的内容一、添加块设备存储服务1.服务简述：OpenStack块存储服务为实例提供块存储。存储的分配和消耗是由块存储驱动器，或者多后端配置的驱动器决定的。还有很多驱动程序可用：NAS/SAN，NFS，ISCSI，Ceph等等。块存......
  • hexo部署报错：Deployer not found: git
    一、报错将hexo部署到Github时发生Deployernotfound:git报错二、报错原因及解决方法报错原因在初次部署hexo时没有安装hexo-deployer-git插件导致部署时发生Deployernotfound:git报错 解决方法1.执行cnpminstallhexo-deployer-git--save或npminstallhexo-d......
  • 一键去水印小程序源码系统 下载无水印的高清图片 带完整的安装代码包以及搭建部署教程
    系统概述一键去水印小程序源码系统是一款专为图片去水印设计的软件开发包（SDK），它集成了先进的图像处理技术和智能识别算法，能够自动识别并去除图片中的水印，同时保持图片的高清画质不受损。该系统支持多种图片格式，包括但不限于JPEG、PNG、GIF等，广泛适用于电商、设计、教育、自媒体......
  • 家庭医生上门服务小程序源码系统 带完整的安装代码包以及搭建部署教程
    系统概述家庭医生上门服务小程序源码系统是一款专为医疗机构、健康服务平台及有意愿涉足健康服务领域的创业者设计的一站式解决方案。该系统集成了预约挂号、在线问诊、健康档案管理、药品配送、健康资讯推送等多种功能于一体，旨在通过移动互联网技术，打破传统医疗服务的时空限......
  • 微服务MongoDB解析部署使用全流程
    1、什么是MongoDB1、非关系型数据库NoSQL，泛指非关系型的数据库。随着互联网web2.0网站的兴起，传统的关系数据库在处理web2.0网站，特别是超大规模和高并发的SNS类型的web2.0纯动态网站已经显得力不从心，出现了很多难以克服的问题，而非关系型的数据库则由于其本身的特点得到了非常......
  • 在K8S中使用Argo CD做持续部署
    什么是ArgoCDArgoCDisadeclarative,GitOpscontinuousdeliverytoolforKubernetes.ArgoCD是一个基于Kubernetes的声明式的GitOps工具。在说ArgoCD之前，我们先来了解一下什么是GitOps。什么是GitOpsGitOps是以Git为基础，使用CI/CD来更新运行在云原生环境的应用，它秉......
  • 通过 Docker 和 Kubernetes 部署前后端代码到服务器
    目录通过Docker和Kubernetes部署前后端代码到服务器一、准备工作二、创建Docker镜像三、部署到Kubernetes四、访问应用程序五、总结在现代软件开发中，Docker和Kubernetes已成为部署应用程序的强大工具。它们提供了一种可靠、可扩展和高效的方式来将前后端代......
  • 领导让部署一个系统服务，我该怎么弄？
    文章目录Dockerdocker基础通过Dockerfile构建镜像打包镜像，离线使用docker修改代理内容Nginxubuntu安装nginxnginx基本操作问题Sqlalchemy可以反射一些表，另外一些反射为None查看服务器的架构和版本，查看本机外网IPPG数据库创建角色创建库并授权前两天接到一个任务，......

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99