首页 > 其他分享 >实验7：基于REST API的SDN北向应用实践

实验7：基于REST API的SDN北向应用实践

时间：2022-10-26 17:01:52浏览次数：49  
标签：__ url self flow REST headers API SDN requests

一、实验目的

1.能够编写程序调用OpenDaylight REST API实现特定网络功能；
2.能够编写程序调用Ryu REST API实现特定网络功能。

二、实验环境

1.下载虚拟机软件Oracle VisualBox或VMware；
2.在虚拟机中安装Ubuntu 20.04 Desktop amd64，并完整安装Mininet、OpenDaylight（Carbon版本）、Postman和Ryu；

三、实验要求

（一）基本要求

1.编写Python程序，调用OpenDaylight的北向接口实现以下功能:

(1) 利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；


(2) 下发指令删除s1上的流表数据。

delete.py

import requests
from requests.auth import HTTPBasicAuth
def http_delete(url):
    url= url
    headers = {'Content-Type':'application/json'}
    resp = requests.delete(url,headers=headers,auth=HTTPBasicAuth('admin', 'admin'))
    return resp

if __name__ == "__main__":
    url='http://127.0.0.1:8181/restconf/operational/opendaylight-inventory:nodes/node/openflow:1/'
    resp = http_delete(url)
    print (resp.content)

(3) 下发硬超时流表，实现拓扑内主机h1和h3网络中断20s。

puts.py

#puts.py
import requests
from requests.auth import HTTPBasicAuth

if __name__ == "__main__":
    url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/1'
    with open("./FlowTable_Hardtimeout.json") as f:
        jstr = f.read()
    headers = {'Content-Type': 'application/json'}
    res = requests.put(url, jstr, headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
    print (res.content)

FlowTable_Hardtimeout.json

{
  "flow": [
    {
      "id": "1",
      "match": {
        "in-port": "1",
        "ethernet-match": {
          "ethernet-type": {
            "type": "0x0800"
          }
        },
        "ipv4-destination": "10.0.0.3/32"
      },
      "instructions": {
        "instruction": [
          {
            "order": "0",
            "apply-actions": {
              "action": [
                {
                  "order": "0",
                  "drop-action": {}
                }
              ]
            }
          }
        ]
      },
      "flow-name": "flow1",
      "priority": "65535",
      "hard-timeout": "20",
      "cookie": "2",
      "table_id": "0"
    }
  ]
}

(4) 获取s1上活动的流表数。

Get_flowtable_info.py

#!/usr/bin/python
import requests
from requests.auth import HTTPBasicAuth

if __name__ == "__main__":
    url = 'http://127.0.0.1:8181/restconf/operational/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/opendaylight-flow-table-statistics:flow-table-statistics'
    headers = {'Content-Type': 'application/json'}
    res = requests.get(url,headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
    print (res.content)

2.编写Python程序，编写Python程序，调用Ryu的北向接口实现以下功能:

(1) 实现上述OpenDaylight实验拓扑上相同的硬超时流表下发。

Hardtimeout.py

#!/usr/bin/python
import requests
from requests.auth import HTTPBasicAuth
def http_post(url,jstr):
    url= url
    headers = {'Content-Type':'application/json'}
    resp = requests.post(url,jstr,headers=headers)
    return resp
if __name__ == "__main__":
    url='http://127.0.0.1:8080/stats/flowentry/add'
    with open('./FlowTable_Hardtimeout.json') as f:
        jstr = f.read()
    resp = http_post(url,jstr)
    print (resp.content)

FlowTable_Hardtimeout.json

{
    "dpid": 1,
    "cookie": 1,
    "cookie_mask": 1,
    "table_id": 0,
    "hard_timeout": 20,
    "priority": 65535,
    "flags": 1,
    "match":{
        "in_port":1
    },
    "actions":[
    
    ]
 }

关闭Opendaylight，清除topo，启动ryu控制器ryu-manager ryu.app.simple_switch_13 ryu.app.ofctl_rest,新建一个topo

运行Hardtimeout.py:

(2) 参考Ryu REST API的文档，基于VLAN实验的网络拓扑，编程实现相同的VLAN配置。

提示：拓扑生成后需连接Ryu，且Ryu应能够提供REST API服务

VLAN_ID Hosts
0 h1 h3
1 h2 h4

topo.py

#!/usr/bin/python
from mininet.topo import Topo

class MyTopo(Topo):
    def __init__(self):
        # initilaize topology
        Topo.__init__(self)

        self.addSwitch("s1")
        self.addSwitch("s2")

        self.addHost("h1")
        self.addHost("h2")
        self.addHost("h3")
        self.addHost("h4")

        self.addLink("s1", "h1")
        self.addLink("s1", "h2")
        self.addLink("s2", "h3")
        self.addLink("s2", "h4")
        self.addLink("s1", "s2")

topos = {'mytopo': (lambda: MyTopo())}

ryu_vlan.py

#!/usr/bin/python
import json

import requests

if __name__ == "__main__":
    url = 'http://127.0.0.1:8080/stats/flowentry/add'
    headers = {'Content-Type': 'application/json'}
    flow1 = {
        "dpid": 1,
        "priority": 1,
        "match":{
            "in_port": 1
        },
        "actions":[
            {
                "type": "PUSH_VLAN",    
                "ethertype": 33024      
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid",    
                "value": 4096           
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow2 = {
        "dpid": 1,
        "priority": 1,
        "match":{
            "in_port": 2
        },
        "actions":[
            {
                "type": "PUSH_VLAN",     
                "ethertype": 33024      
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid",     
                "value": 4097           
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow3 = {
        "dpid": 1,
        "priority": 1,
        "match":{
            "vlan_vid": 0
        },
        "actions":[
            {
                "type": "POP_VLAN",    
                "ethertype": 33024     
            },
            {
                "type": "OUTPUT",
                "port": 1
            }
        ]
    }
    flow4 = {
        "dpid": 1,
        "priority": 1,
        "match": {
            "vlan_vid": 1
        },
        "actions": [
            {
                "type": "POP_VLAN", 
                "ethertype": 33024  
            },
            {
                "type": "OUTPUT",
                "port": 2
            }
        ]
    }
    flow5 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "in_port": 1
        },
        "actions": [
            {
                "type": "PUSH_VLAN", 
                "ethertype": 33024 
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid", 
                "value": 4096  
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow6 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "in_port": 2
        },
        "actions": [
            {
                "type": "PUSH_VLAN",  
                "ethertype": 33024  
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid",  
                "value": 4097 
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow7 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "vlan_vid": 0
        },
        "actions": [
            {
                "type": "POP_VLAN", 
                "ethertype": 33024  
            },
            {
                "type": "OUTPUT",
                "port": 1
            }
        ]
    }
    flow8 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "vlan_vid": 1
        },
        "actions": [
            {
                "type": "POP_VLAN", 
                "ethertype": 33024  
            },
            {
                "type": "OUTPUT",
                "port": 2
            }
        ]
    }
    res1 = requests.post(url, json.dumps(flow1), headers=headers)
    res2 = requests.post(url, json.dumps(flow2), headers=headers)
    res3 = requests.post(url, json.dumps(flow3), headers=headers)
    res4 = requests.post(url, json.dumps(flow4), headers=headers)
    res5 = requests.post(url, json.dumps(flow5), headers=headers)
    res6 = requests.post(url, json.dumps(flow6), headers=headers)
    res7 = requests.post(url, json.dumps(flow7), headers=headers)
    res8 = requests.post(url, json.dumps(flow8), headers=headers)

关闭Ryu控制器，清除topo，启动ryu控制器ryu-manager ryu.app.simple_switch_13 ryu.app.ofctl_rest,再次新建一个topo

删除流表

curl -X DELETE http://127.0.0.1:8080/stats/flowentry/clear/1

curl -X DELETE http://127.0.0.1:8080/stats/flowentry/clear/2

运行ryu_vlan.py后pingall结果截图:

（二）进阶要求

OpenDaylight或Ryu任选其一，编程实现查看前序VLAN实验拓扑中所有节点（含交换机、主机）的名称，以及显示每台交换机的所有流表项。

advanced.py

#!/usr/bin/python
import requests
import time
import re


class GetInformation:
    def __init__(self, ip):
        self.ip = ip
        

    def get_switch_id(self):
        url = 'http://' + self.ip + '/stats/switches'
        re_switch_id = requests.get(url=url).json()
        switch_id_hex = []
        for i in re_switch_id:
            switch_id_hex.append(hex(i))
        return switch_id_hex

    def get_flow_table(self):
        url = 'http://' + self.ip + '/stats/flow/%d'
        list_switch = self.get_switch_id()
        all_flow = []
        for switch in list_switch:
            new_url = format(url % int(switch, 16))
            re_switch_flow = requests.get(url=new_url).json()
            all_flow.append(re_switch_flow)
        return all_flow

    def show_flow(self):
        list_flow = self.get_flow_table()
        for flow in list_flow:
            for dpid in flow.keys():
                dp_id = dpid
                print('switch_name:s{1}'.format(hex(int(dp_id)), int(dp_id)))
            for list_table in flow.values():
                for table in list_table:
                    print(table)
                    
    def show_name(self):
        list_flow = self.get_flow_table()
        for flow in list_flow:
            for dpid in flow.keys():
                dp_id = dpid
                switchnum= '{1}'.format(hex(int(dp_id)), int(dp_id))        
                print('s'+switchnum)
                switchnum = int(switchnum)
            for list_table in flow.values():
                count = 0
                for table in list_table:
                    string1 = str(table)
                    if re.search("'dl_vlan': '(.*?)'", string1) is not None:
                        num = re.search("'dl_vlan': '(.*?)'", string1).group(1);
                        if num == '0' and switchnum == 1:
                            print('h1')
                        if num == '1' and switchnum == 1:
                            print('h2')
                        if num == '0' and switchnum == 2:
                            print('h3')
                        if num == '1' and switchnum == 2:
                            print('h4')

S1 = GetInformation("127.0.0.1:8080");
S1.show_name();
S1.show_flow();

个人总结

N.H.O saved for tomorrow.

标签：__,url,self,flow,REST,headers,API,SDN,requests
From： https://www.cnblogs.com/qpen/p/16829045.html

相关文章

  • 实验7：基于REST API的SDN北向应用实践
    实验7：基于RESTAPI的SDN北向应用实践实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。实验要求（一）......
  • 实验7：基于REST API的SDN北向应用实践
    一、基本要求：①、编写Python程序，调用OpenDaylight的北向接口实现以下功能：0、利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；1、删除s1上的流表数据代码及其截......
  • Docker部署Springboot WebAPI项目
    确定docker安装好Client:Version:20.10.12APIversion:1.41Goversion:go1.17.3Gitcommit:20.10.12-0ubuntu4Built:......
  • 实验7：基于REST API的SDN北向应用实践
    实验7：基于RESTAPI的SDN北向应用实践一、实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验......
  • Vue3笔记（二）了解组合式API的应用与方法
    一、组合式API（CompositionAPI）的介绍官方文档: https://v3.cn.vuejs.org/guide/composition-api-introduction.html组合式API(CompositionAPI)是一系列API的集合，......
  • 实验7：基于REST API的SDN北向应用实践
    1.编写Python程序，调用OpenDaylight的北向接口实现以下功能（1）利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；（2）下发指令删除s1上的流表数据。#!/usr/bin/pyt......
  • 实验7：基于REST API的SDN北向应用实践
    基本要求编写Python程序，调用OpenDaylight的北向接口实现以下功能（1）利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；（2）下发指令删除s1上的流表数据。#delete.p......
  • 传统 API 管理与测试过程正面临严峻的挑战
    随着测试左移思想的引入，API（应用程序编程接口）经济的飞速增长，导致对API管理平台的需求相应增加。越来越多的企业注重并关注接口测试。单纯的做接口测试或者做好接口测试的......
  • 实验7：基于REST API的SDN北向应用实践
    一、实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境下载虚拟机软件OracleVisualBo......
  • Vue3-CompositionAPI-响应式基础
    一、响应式基础前提：你会使用setup函数或<scriptsetup>语法1.reactive我们可以使用reactive()函数创建一个响应式对象或数组：import{reactive}from'vue'c......

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99