首页 > 其他分享 >实验7：基于REST API的SDN北向应用实践

实验7：基于REST API的SDN北向应用实践

时间：2022-10-26 09:23:17浏览次数：55  
标签：__ url self flow REST headers API SDN requests

（一）基本要求

编写Python程序，调用OpenDaylight的北向接口实现以下功能

（1） 利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；

（2） 下发指令删除s1上的流表数据。

python代码

import requests
from requests.auth import HTTPBasicAuth

if __name__ == "__main__":

    url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/'
    headers = {'Content-Type': 'application/json'}
    res = requests.delete(url, headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
    print (res.content)

（3） 下发硬超时流表，实现拓扑内主机h1和h3网络中断20s。

python代码块

#!/usr/bin/python
import requests
from requests.auth import HTTPBasicAuth
def http_put(url,jstr):
    url= url
    headers = {'Content-Type':'application/json'}
    resp = requests.put(url,jstr,headers=headers,auth=HTTPBasicAuth('admin', 'admin'))
    return resp

if __name__ == "__main__":
    url='http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/1'
    with open('timeout.json') as f:
        jstr = f.read()
    resp = http_put(url,jstr)
    print (resp.content)

json内容

{
  "flow": [
    {
      "id": "1",
      "match": {
        "in-port": "1",
        "ethernet-match": {
          "ethernet-type": {
            "type": "0x0800"
          }
        },
        "ipv4-destination": "10.0.0.3/32"
      },
      "instructions": {
        "instruction": [
          {
            "order": "0",
            "apply-actions": {
              "action": [
                {
                  "order": "0",
                  "drop-action": {}
                }
              ]
            }
          }
        ]
      },
      "flow-name": "flow1",
      "priority": "65535",
      "hard-timeout": "20",
      "cookie": "2",
      "table_id": "0"
    }
  ]
}

（4） 获取s1上活动的流表数。

python 代码

import requests
from requests.auth import HTTPBasicAuth

if __name__ == "__main__":
    url = 'http://127.0.0.1:8181/restconf/operational/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/opendaylight-flow-table-statistics:flow-table-statistics'
    headers = {'Content-Type': 'application/json'}
    res = requests.get(url,headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
    print (res.content)

编写Python程序，调用Ryu的北向接口实现以下功能

（1） 实现上述OpenDaylight实验拓扑上相同的硬超时流表下发
python代码

import requests

if __name__ == "__main__":
    url = 'http://127.0.0.1:8080/stats/flowentry/add'
    with open("./RYUflowtable.json") as f:
        jstr = f.read()
    headers = {'Content-Type': 'application/json'}
    res = requests.post(url, jstr, headers=headers)
    print (res.content)

json文件内容

{
    "dpid": 1,
    "cookie": 1,
    "cookie_mask": 1,
    "table_id": 0,
    "hard_timeout": 20,
    "priority": 65535,
    "flags": 1,
    "match":{
        "in_port":1,
    },
    "actions":[

    ]
 }

（2） 参考Ryu REST API的文档，基于VLAN实验的网络拓扑，编程实现相同的VLAN配置。

topo.py

#topo.py
from mininet.topo import Topo

class MyTopo(Topo):
    def __init__(self):
        # initilaize topology
        Topo.__init__(self)

        self.addSwitch("s1")
        self.addSwitch("s2")

        self.addHost("h1")
        self.addHost("h2")
        self.addHost("h3")
        self.addHost("h4")

        self.addLink("s1", "h1")
        self.addLink("s1", "h2")
        self.addLink("s2", "h3")
        self.addLink("s2", "h4")
        self.addLink("s1", "s2")

topos = {'mytopo': (lambda: MyTopo())}

Ryuvlan.py

# vlan.py
import json

import requests

if __name__ == "__main__":
    url = 'http://127.0.0.1:8080/stats/flowentry/add'
    headers = {'Content-Type': 'application/json'}
    flow1 = {
        "dpid": 1,
        "priority": 1,
        "match":{
            "in_port": 1
        },
        "actions":[
            {
                "type": "PUSH_VLAN",    
                "ethertype": 33024      
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid",    
                "value": 4096           
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow2 = {
        "dpid": 1,
        "priority": 1,
        "match":{
            "in_port": 2
        },
        "actions":[
            {
                "type": "PUSH_VLAN",     
                "ethertype": 33024      
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid",     
                "value": 4097           
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow3 = {
        "dpid": 1,
        "priority": 1,
        "match":{
            "vlan_vid": 0
        },
        "actions":[
            {
                "type": "POP_VLAN",    
                "ethertype": 33024     
            },
            {
                "type": "OUTPUT",
                "port": 1
            }
        ]
    }
    flow4 = {
        "dpid": 1,
        "priority": 1,
        "match": {
            "vlan_vid": 1
        },
        "actions": [
            {
                "type": "POP_VLAN", 
                "ethertype": 33024  
            },
            {
                "type": "OUTPUT",
                "port": 2
            }
        ]
    }
    flow5 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "in_port": 1
        },
        "actions": [
            {
                "type": "PUSH_VLAN", 
                "ethertype": 33024 
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid", 
                "value": 4096  
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow6 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "in_port": 2
        },
        "actions": [
            {
                "type": "PUSH_VLAN",  
                "ethertype": 33024  
            },
            {
                "type": "SET_FIELD",
                "field": "vlan_vid",  
                "value": 4097 
            },
            {
                "type": "OUTPUT",
                "port": 3
            }
        ]
    }
    flow7 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "vlan_vid": 0
        },
        "actions": [
            {
                "type": "POP_VLAN", 
                "ethertype": 33024  
            },
            {
                "type": "OUTPUT",
                "port": 1
            }
        ]
    }
    flow8 = {
        "dpid": 2,
        "priority": 1,
        "match": {
            "vlan_vid": 1
        },
        "actions": [
            {
                "type": "POP_VLAN", 
                "ethertype": 33024  
            },
            {
                "type": "OUTPUT",
                "port": 2
            }
        ]
    }
    res1 = requests.post(url, json.dumps(flow1), headers=headers)
    res2 = requests.post(url, json.dumps(flow2), headers=headers)
    res3 = requests.post(url, json.dumps(flow3), headers=headers)
    res4 = requests.post(url, json.dumps(flow4), headers=headers)
    res5 = requests.post(url, json.dumps(flow5), headers=headers)
    res6 = requests.post(url, json.dumps(flow6), headers=headers)
    res7 = requests.post(url, json.dumps(flow7), headers=headers)
    res8 = requests.post(url, json.dumps(flow8), headers=headers)

（二）进阶要求

OpenDaylight或Ryu任选其一，编程实现查看前序VLAN实验拓扑中所有节点（含交换机、主机）的名称，以及显示每台交换机的所有流表项。
get.py


import requests
import time
import re


class GetNodes:
    def __init__(self, ip):
        self.ip = ip
        
    def get_switch_id(self):
        url = 'http://' + self.ip + '/stats/switches'
        re_switch_id = requests.get(url=url).json()
        switch_id_hex = []
        for i in re_switch_id:
            switch_id_hex.append(hex(i))

        return switch_id_hex

    def getflow(self):
        url = 'http://' + self.ip + '/stats/flow/%d'
        switch_list = self.get_switch_id()
        ret_flow = []
        for switch in switch_list:
            new_url = format(url % int(switch, 16))
            re_switch_flow = requests.get(url=new_url).json()
            ret_flow.append(re_switch_flow)
        return ret_flow

    def show(self):
        flow_list = self.getflow()
        for flow in flow_list:
            for dpid in flow.keys():
                dp_id = dpid
                switchnum= '{1}'.format(hex(int(dp_id)), int(dp_id))        
                print('s'+switchnum,end = " ")
                switchnum = int(switchnum)
            for list_table in flow.values():
                for table in list_table:          
                    string1 = str(table)
                    if re.search("'dl_vlan': '(.*?)'", string1) is not None:
                       num = re.search("'dl_vlan': '(.*?)'", string1).group(1);
                       if num == '0' and switchnum == 1:
                          print('h1',end = " ")
                       if num == '1' and switchnum == 1:
                          print('h2',end = " ")
                       if num == '0' and switchnum == 2:
                          print('h3',end = " ")
                       if num == '1' and switchnum == 2:
                          print('h4',end = " ")
        print("")
        flow_list = self.getflow()
        for flow in flow_list:
            for dpid in flow.keys():
                dp_id = dpid
                print('switch_name:s{1}'.format(hex(int(dp_id)), int(dp_id)))
            for list_table in flow.values():
                for table in list_table:
                    print(table)
s1 = GetNodes("127.0.0.1:8080")
s1.show()

个人总结

通过此次实验，我对OpenDaylight和Ryu的相关知识有了更加深入的了解。此次实验还是有一定的难度，对操作（诸如通过python编程来使用ODL REST API和Ryu Rest API ），文件的理解都有一定的要求，在整个实验过程中，我也遇到了一些问题。
比如后面有遇到无法识别“curl”的提示，只需按照系统的提示输入“sudo apt-get install curl ”的命令就能够解决。通过本次实验，我复习到了之前所有学习过的知识，例如VLAN的设置、硬超时的设置等，也学习到了新的知识，学会了调用OpenDaylight REST API实现特定网络功能和调用Ryu REST API实现特定网络功能。

标签：__,url,self,flow,REST,headers,API,SDN,requests
From： https://www.cnblogs.com/50qq/p/16827118.html

相关文章

  • API大全
    总结一些API接口，使用起来方便，不断更新。。。。一、天气API详细使用：http://www.cnblogs.com/wangjingblogs/p/3192953.html二、翻译API有道翻译：http://fanyi.youdao.com......
  • 实验7：基于REST API的SDN北向应用实践
    三、实验要求（一）基本要求编写Python程序，调用OpenDaylight的北向接口实现以下功能（1）利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；（2）下发指令删除s1上的流表......
  • 实验7：基于REST API的SDN北向应用实践
    一、实验目的1.能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；2.能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验要求1.编写Python程序，调用OpenDayl......
  • 实验7：基于REST API的SDN北向应用实践
    基本要求1、编写Python程序，调用OpenDaylight的北向接口实现以下功能：(1)利用Mininet平台搭建拓扑，并连接OpenDaylight(2)下发指令删除s1上的流表数据代码delete.py#!/u......
  • 实验7：基于REST API的SDN北向应用实践
    一、实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境下载虚拟机软件OracleVisualBo......
  • 《将博客搬至CSDN》Docker中浏览器访问内网，并解决无中文字体问题
    需求说明在自己的本地服务器中部署了很多应用，使用内网穿透访问，但能够使用的端口有限，一个一个映射也不实际，所以想到使用docker部署一个firefox浏览器来访问内网的网页。......
  • 实验7：基于REST API的SDN北向应用实践
    一、实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境下载虚拟机软件OracleVisualBox或......
  • 实验7：基于REST API的SDN北向应用实践
    一、实验目的1.能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；2.能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境1.下载虚拟机软件OracleVisua......
  • 实验7：基于REST API的SDN北向应用实践
    一、实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境下载虚拟机软件OracleVisualBo......
  • 实验7：基于REST API的SDN北向应用实践
    目录（一）基本要求（二）进阶要求个人总结（一）基本要求1.编写Python程序，调用OpenDaylight的北向接口实现以下功能（1）利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；（2）......

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99