Jetson 开发板配置
1. 虚拟界面配置
1.1 安装 xserver-xorg
sudo apt-get install xserver-xorg-core-hwe-18.04
sudo apt-get install xserver-xorg-video-dummy
1.2 打开配置文件
vim /usr/share/X11/xorg.conf.d/xorg.conf
修改配置
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0-80.0
VertRefresh 48.0-75.0
Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
EndSection
Section "Device"
Identifier "Card0"
Driver "dummy"
VideoRam 256000
EndSection
Section "Screen"
DefaultDepth 24
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 24
Modes "1920x1080_60.00"
EndSubSection
EndSection
1.3 重启机器
重启后自动启用虚拟显示屏,如果之后再需要用显示器,将 / usr/share/X11/xorg.conf.d/xorg.conf 文件移除,再重启机器即可。
标签:md,xorg,xserver,Section,开发板,conf,Jetson,Identifier From: https://www.cnblogs.com/Maybera/p/18133529