主代码，要log4ahk库
#include <log4ahk>
#NoEnv
SendMode Input
SetWorkingDir %A_ScriptDir%
ARDUINO_Port = COM3
ARDUINO_Baud = 115200
ARDUINO_Parity = N
ARDUINO_Data = 8
ARDUINO_Stop = 1
arduino_setup(start_polling_serial:=false)
i := 1
loop{
data = % arduino_read()
If (data != ""){
Str := data
DllCall("crypt32\CryptStringToBinaryW", "ptr", &str, "uint", StrLen(str), "uint", 0x4, "ptr", 0, "uint*", bytes, "ptr", 0, "ptr", 0)
VarSetCapacity(buf, bytes)
DllCall("crypt32\CryptStringToBinaryW", "ptr", &str, "uint", StrLen(str), "uint", 0x4, "ptr", &buf, "uint*", bytes, "ptr", 0, "ptr", 0)
log.info(StrGet(&buf, "utf-8"))
}
}
Return
OnExit:
arduino_close()
; ===============================================================================================================================
#include %A_ScriptDir%\Arduino.ahkArduino.ahk
#include %A_ScriptDir%\Serial.ahk
; Arduino AHK Library
arduino_setup(start_polling_serial=true,ping_device=true){
global
ARDUINO_Settings = %ARDUINO_Port%:baud=%ARDUINO_Baud% parity=%ARDUINO_Parity% data=%ARDUINO_Data% stop=%ARDUINO_Stop% dtr=off ;to=off xon=off odsr=off octs=off rts=off idsr=off
ARDUINO_Handle := Serial_Initialize(ARDUINO_Settings)
if ping_device {
arduino_send("")
}
if (arduino_poll_serial_enabled := start_polling_serial) {
SetTimer, arduino_poll_serial, -1
}
}
arduino_send(data){
global ARDUINO_Handle
Serial_Write(ARDUINO_Handle, data)
sleep, 50
return arduino_read_raw()
}
arduino_read(){
global ARDUINO_Handle
return Serial_Read(ARDUINO_Handle, "0xFF", Bytes_Received)
}
arduino_read_raw(){
global ARDUINO_Handle
return Serial_Read_Raw(ARDUINO_Handle, "0xFF", "raw",Bytes_Received)
}
arduino_close(){
global ARDUINO_Handle, arduino_poll_serial
; turn off timer if it is running
SetTimer, arduino_poll_serial, Off
; wait a bit for timer to finished if it happened
Sleep, 100
Serial_Close(ARDUINO_Handle)
}
arduino_poll_serial:
if (IsFunc(f:="OnSerialData")&&(arduino_poll_serial_enabled == true)){
SerialData := arduino_read_raw()
if SerialData {
%f%(SerialData)
}
SetTimer, arduino_poll_serial, -1
}else{
MsgBox, OnSerialData function not defined.
SetTimer, arduino_poll_serial, Off
arduino_poll_serial_enabled = false
}
returnSerial.ahk
; from here: http://www.autohotkey.com/forum/viewtopic.php?p=290253#290253
;########################################################################
;###### Initialize COM Subroutine #######################################
;########################################################################
Serial_Initialize(SERIAL_Settings){
;Global SERIAL_FileHandle ;uncomment this if there is a problem
;###### Build COM DCB ######
;Creates the structure that contains the COM Port number, baud rate,...
VarSetCapacity(DCB, 28)
BCD_Result := DllCall("BuildCommDCB"
,"str" , SERIAL_Settings ;lpDef
,"UInt", &DCB) ;lpDCB
If (BCD_Result <> 1){
error := DllCall("GetLastError")
MsgBox, There is a problem with Serial Port communication. `nFailed Dll BuildCommDCB, BCD_Result=%BCD_Result% `nLasterror=%error%`nThe Script Will Now Exit.
ExitApp
}
;###### Extract/Format the COM Port Number ######
StringSplit, SERIAL_Port_Temp, SERIAL_Settings, `:
SERIAL_Port_Temp1_Len := StrLen(SERIAL_Port_Temp1) ;For COM Ports > 9 \\.\ needs to prepended to the COM Port name.
If (SERIAL_Port_Temp1_Len > 4) ;So the valid names are
SERIAL_Port = \\.\%SERIAL_Port_Temp1% ; ... COM8 COM9 \\.\COM10 \\.\COM11 \\.\COM12 and so on...
Else ;
SERIAL_Port = %SERIAL_Port_Temp1%
;MsgBox, SERIAL_Port=%SERIAL_Port%
;###### Create COM File ######
;Creates the COM Port File Handle
;StringLeft, SERIAL_Port, SERIAL_Settings, 4 ; 7/23/08 This line is replaced by the "Extract/Format the COM Port Number" section above.
SERIAL_FileHandle := DllCall("CreateFile"
,"Str" , SERIAL_Port ;File Name
,"UInt", 0xC0000000 ;Desired Access
,"UInt", 3 ;Safe Mode
,"UInt", 0 ;Security Attributes
,"UInt", 3 ;Creation Disposition
,"UInt", 0 ;Flags And Attributes
,"UInt", 0 ;Template File
,"Cdecl Int")
If (SERIAL_FileHandle < 1){
error := DllCall("GetLastError")
MsgBox, There is a problem with Serial Port communication. `nFailed Dll CreateFile, SERIAL_FileHandle=%SERIAL_FileHandle% `nLasterror=%error%`nThe Script Will Now Exit.
ExitApp
}
;###### Set COM State ######
;Sets the COM Port number, baud rate,...
SCS_Result := DllCall("SetCommState"
,"UInt", SERIAL_FileHandle ;File Handle
,"UInt", &DCB) ;Pointer to DCB structure
If (SCS_Result <> 1){
error := DllCall("GetLastError")
MsgBox, There is a problem with Serial Port communication. `nFailed Dll SetCommState, SCS_Result=%SCS_Result% `nLasterror=%error%`nThe Script Will Now Exit.
Serial_Close(SERIAL_FileHandle)
ExitApp
}
;###### Create the SetCommTimeouts Structure ######
ReadIntervalTimeout = 0xffffffff
ReadTotalTimeoutMultiplier = 0x00000000
ReadTotalTimeoutConstant = 0x00000000
WriteTotalTimeoutMultiplier= 0x00000000
WriteTotalTimeoutConstant = 0x00000000
VarSetCapacity(Data, 20, 0) ; 5 * sizeof(DWORD)
NumPut(ReadIntervalTimeout, Data, 0, "UInt")
NumPut(ReadTotalTimeoutMultiplier, Data, 4, "UInt")
NumPut(ReadTotalTimeoutConstant, Data, 8, "UInt")
NumPut(WriteTotalTimeoutMultiplier, Data, 12, "UInt")
NumPut(WriteTotalTimeoutConstant, Data, 16, "UInt")
;###### Set the COM Timeouts ######
SCT_result := DllCall("SetCommTimeouts"
,"UInt", SERIAL_FileHandle ;File Handle
,"UInt", &Data) ;Pointer to the data structure
If (SCT_result <> 1){
error := DllCall("GetLastError")
MsgBox, There is a problem with Serial Port communication. `nFailed Dll SetCommState, SCT_result=%SCT_result% `nLasterror=%error%`nThe Script Will Now Exit.
Serial_Close(SERIAL_FileHandle)
ExitApp
}
Return SERIAL_FileHandle
}
;########################################################################
;###### Close COM Subroutine ############################################
;########################################################################
Serial_Close(SERIAL_FileHandle){
;###### Close the COM File ######
CH_result := DllCall("CloseHandle", "UInt", SERIAL_FileHandle)
If (CH_result <> 1)
MsgBox, Failed Dll CloseHandle CH_result=%CH_result%
Return
}
;########################################################################
;###### Write to COM Subroutines ########################################
;########################################################################
Serial_Write(SERIAL_FileHandle, Message){
;Global SERIAL_FileHandle
OldIntegerFormat := A_FormatInteger
SetFormat, Integer, DEC
;Parse the Message. Byte0 is the number of bytes in the array.
StringSplit, Byte, Message, `,
Data_Length := Byte0
;msgbox, Data_Length=%Data_Length% b1=%Byte1% b2=%Byte2% b3=%Byte3% b4=%Byte4%
;Set the Data buffer size, prefill with 0xFF.
VarSetCapacity(Data, Byte0, 0xFF)
;Write the Message into the Data buffer
i=1
Loop %Byte0% {
NumPut(Byte%i%, Data, (i-1) , "UChar")
;msgbox, %i%
i++
}
;msgbox, Data string=%Data%
;###### Write the data to the COM Port ######
WF_Result := DllCall("WriteFile"
,"UInt" , SERIAL_FileHandle ;File Handle
,"UInt" , &Data ;Pointer to string to send
,"UInt" , Data_Length ;Data Length
,"UInt*", Bytes_Sent ;Returns pointer to num bytes sent
,"Int" , "NULL")
If (WF_Result <> 1 or Bytes_Sent <> Data_Length)
MsgBox, Failed Dll WriteFile to COM Port, result=%WF_Result% `nData Length=%Data_Length% `nBytes_Sent=%Bytes_Sent%
SetFormat, Integer, %OldIntegerFormat%
Return Bytes_Sent
}
;########################################################################
;###### Read from COM Subroutines #######################################
;########################################################################
Serial_Read(SERIAL_FileHandle, Num_Bytes, byref Bytes_Received = ""){
;Global SERIAL_FileHandle
;Global SERIAL_Port
;Global Bytes_Received
OldIntegerFormat := A_FormatInteger
SetFormat, Integer, HEX
;Set the Data buffer size, prefill with 0x55 = ASCII character "U"
;VarSetCapacity won't assign anything less than 3 bytes. Meaning: If you
; tell it you want 1 or 2 byte size variable it will give you 3.
Data_Length := VarSetCapacity(Data, Num_Bytes, 0)
;msgbox, Data_Length=%Data_Length%
;Bytes_Received := 0
;###### Read the data from the COM Port ######
;msgbox, SERIAL_FileHandle=%SERIAL_FileHandle% `nNum_Bytes=%Num_Bytes%
Read_Result := DllCall("ReadFile"
,"UInt" , SERIAL_FileHandle ; hFile
,"Str" , Data ; lpBuffer
,"Int" , Num_Bytes ; nNumberOfBytesToRead
,"UInt*", Bytes_Received ; lpNumberOfBytesReceived
,"Int" , 0) ; lpOverlapped
;MsgBox, Read_Result=%Read_Result% `nBR=%Bytes_Received% ,`nData=%Data%
If (Read_Result <> 1){
MsgBox, There is a problem with Serial Port communication. `nFailed Dll ReadFile on COM Port, result=%Read_Result% - The Script Will Now Exit.
Serial_Close(SERIAL_FileHandle)
Exit
}
;###### Format the received data ######
;This loop is necessary because AHK doesn't handle NULL (0x00) characters very nicely.
;Quote from AHK documentation under DllCall:
; "Any binary zero stored in a variable by a function will hide all data to the right
; of the zero; that is, such data cannot be accessed or changed by most commands and
; functions. However, such data can be manipulated by the address and dereference operators
; (& and *), as well as DllCall itself."
i = 0
Data_HEX =
Loop %Bytes_Received% {
;First byte into the Rx FIFO ends up at position 0
Data_HEX_Temp := NumGet(Data, i, "UChar") ;Convert to HEX byte-by-byte
StringTrimLeft, Data_HEX_Temp, Data_HEX_Temp, 2 ;Remove the 0x (added by the above line) from the front
;If there is only 1 character then add the leading "0'
Length := StrLen(Data_HEX_Temp)
If (Length =1)
Data_HEX_Temp = 0%Data_HEX_Temp%
i++
;Put it all together
Data_HEX .= Data_HEX_Temp
}
;MsgBox, Read_Result=%Read_Result% `nBR=%Bytes_Received% ,`nData_HEX=%Data_HEX%
SetFormat, Integer, DEC
Data := Data_HEX
SetFormat, Integer, %OldIntegerFormat%
Return Data
}
;########################################################################
;###### Read from COM Subroutines #######################################
;########################################################################
Serial_Read_Raw(SERIAL_FileHandle, Num_Bytes, mode = "",byref Bytes_Received = ""){
;Global SERIAL_FileHandle
;Global SERIAL_Port
;Global Bytes_Received
OldIntegerFormat := A_FormatInteger
SetFormat, Integer, HEX
;Set the Data buffer size, prefill with 0x55 = ASCII character "U"
;VarSetCapacity won't assign anything less than 3 bytes. Meaning: If you
; tell it you want 1 or 2 byte size variable it will give you 3.
Data_Length := VarSetCapacity(Data, Num_Bytes, 0)
;msgbox, Data_Length=%Data_Length%
;###### Read the data from the COM Port ######
;msgbox, SERIAL_FileHandle=%SERIAL_FileHandle% `nNum_Bytes=%Num_Bytes%
Read_Result := DllCall("ReadFile"
,"UInt" , SERIAL_FileHandle ; hFile
,"Str" , Data ; lpBuffer
,"Int" , Num_Bytes ; nNumberOfBytesToRead
,"UInt*", Bytes_Received ; lpNumberOfBytesReceived
,"Int" , 0) ; lpOverlapped
;MsgBox, Read_Result=%Read_Result% `nBR=%Bytes_Received% ,`nData=%Data%
If (Read_Result <> 1){
MsgBox, There is a problem with Serial Port communication. `nFailed Dll ReadFile on COM Port, result=%Read_Result% - The Script Will Now Exit.
Serial_Close(SERIAL_FileHandle)
Exit
}
;if you know the data coming back will not contain any binary zeros (0x00), you can request the 'raw' response
If (mode = "raw")
Return Data
;###### Format the received data ######
;This loop is necessary because AHK doesn't handle NULL (0x00) characters very nicely.
;Quote from AHK documentation under DllCall:
; "Any binary zero stored in a variable by a function will hide all data to the right
; of the zero; that is, such data cannot be accessed or changed by most commands and
; functions. However, such data can be manipulated by the address and dereference operators
; (& and *), as well as DllCall itself."
i = 0
Data_HEX =
Loop %Bytes_Received%
{
;First byte into the Rx FIFO ends up at position 0
Data_HEX_Temp := NumGet(Data, i, "UChar") ;Convert to HEX byte-by-byte
StringTrimLeft, Data_HEX_Temp, Data_HEX_Temp, 2 ;Remove the 0x (added by the above line) from the front
;If there is only 1 character then add the leading "0'
Length := StrLen(Data_HEX_Temp)
If (Length =1)
Data_HEX_Temp = 0%Data_HEX_Temp%
i++
;Put it all together
Data_HEX .= Data_HEX_Temp
}
;MsgBox, Read_Result=%Read_Result% `nBR=%Bytes_Received% ,`nData_HEX=%Data_HEX%
SetFormat, Integer, DEC
Data := Data_HEX
SetFormat, Integer, %OldIntegerFormat%
Return Data
}arduino代码，用来模拟传感器输出
int pos = 100;
void setup()
{
delay(1000);
Serial.begin(115200);
}
void loop()
{
if (Serial.available() > 0) {
Serial.print(pos); //模拟传感器输出
delay(1500);
}
}标签：arduino,HEX,Bytes,pc,传感器,######,SERIAL,Data,Port From： https://www.cnblogs.com/ff888/p/16790550.html