标签：00 x86 Kubernetes 部署 -- 64 master el7
一、准备环境
| 角色 |
IP地址 |
组件 |
| master |
192.168.0.10 |
docker，kubectl，kubeadm，kubelet |
| node01 |
192.168.0.11 |
docker，kubectl，kubeadm，kubelet |
| node02 |
192.168.0.12 |
docker，kubectl，kubeadm，kubelet |
二、部署搭建（master和node都要初始化，我这里举例master）
1 检查操作系统的版本
# 安装kubernetes集群要求Centos版本要在7.5或之上
[root@master ~]# cat /etc/redhat-release
CentOS Linux release 7.6.1810 (Core)
2 主机名解析
[root@master ~]# vi /etc/hosts
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
127.0.0.1 ecs-master-0001 ecs-master-0001
192.168.0.10 master
192.168.0.11 node01
192.168.0.12 node02
3 时间同步
# 启动chronyd服务
[root@master ~]# systemctl enable --now chronyd
[root@master ~]# date
Fri Jan 6 09:27:09 CST 2023
4 停止iptable和firewalld服务
[root@master ~]# systemctl disable --now firewalld
[root@master ~]# systemctl disable --now iptables
Failed to execute operation: No such file or directory
[root@master ~]# systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:firewalld(1)
[root@master ~]# systemctl status iptables
Unit iptables.service could not be found.
5 停止SeLinux
# 改成SELINUX=disabled
[root@master ~]# vi /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three values:
# targeted - Targeted processes are protected,
# minimum - Modification of targeted policy. Only selected processes are protected.
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
[root@master ~]# setenforce 0
6 禁用swap分区
# 注释掉/dev/mapper/centos-swap这一行
[root@master ~]# vi /etc/fstab
#
# /etc/fstab
# Created by anaconda on Thu Feb 10 08:57:10 2022
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=4fde6d8c-b0bb-4d16-a95f-c578b5f9c2a6 / ext4 defaults 1 1
# /dev/mapper/centos-swap swap swap defaults 0 0
7 修改linux的内核参数
# 添加网桥过滤和地址转发功能
[root@master ~]# vi /etc/sysctl.d/kubernetes.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
[root@master ~]# sysctl -p
vm.swappiness = 0
net.core.somaxconn = 1024
net.ipv4.tcp_max_tw_buckets = 5000
net.ipv4.tcp_max_syn_backlog = 1024
[root@master ~]# modprobe br_netfilter
[root@master ~]# lsmod | grep br_netfilter
br_netfilter 22256 0
bridge 151336 1 br_netfilter
8 配置ipvs功能
# 安装ipset和ipvadm
[root@master ~]# yum -y install ipset ipvsadm
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Package ipset-7.1-1.el7.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package ipvsadm.x86_64 0:1.27-8.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================================
Installing:
ipvsadm x86_64 1.27-8.el7 base 45 k
Transaction Summary
=============================================================================================================================================
Install 1 Package
Total download size: 45 k
Installed size: 75 k
Downloading packages:
ipvsadm-1.27-8.el7.x86_64.rpm | 45 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Warning: RPMDB altered outside of yum.
Installing : ipvsadm-1.27-8.el7.x86_64 1/1
Verifying : ipvsadm-1.27-8.el7.x86_64 1/1
Installed:
ipvsadm.x86_64 0:1.27-8.el7
Complete!
# 添加写入脚本文件
[root@master ~]# cat <<EOF> /etc/sysconfig/modules/ipvs.modules
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF
[root@master ~]# ls /etc/sysconfig/modules/
ipvs.modules
# 添加权限执行脚本
[root@master ~]# chmod +x /etc/sysconfig/modules/ipvs.modules
[root@master ~]# ll /etc/sysconfig/modules/ipvs.modules
-rwxr-xr-x 1 root root 124 Jan 5 16:18 /etc/sysconfig/modules/ipvs.modules
[root@master ~]# sh /etc/sysconfig/modules/ipvs.modules
[root@master ~]# lsmod | grep -e ip_vs -e nf_conntrack_ipv4
nf_conntrack_ipv4 15053 0
nf_defrag_ipv4 12729 1 nf_conntrack_ipv4
ip_vs_sh 12688 0
ip_vs_wrr 12697 0
ip_vs_rr 12600 0
ip_vs 145458 6 ip_vs_rr,ip_vs_sh,ip_vs_wrr
nf_conntrack 139264 2 ip_vs,nf_conntrack_ipv4
libcrc32c 12644 2 ip_vs,nf_conntrack
9 重启
[root@master ~]# reboot
10 安装docker
# 下载yum源
[root@master ~]# wget https://repo.huaweicloud.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo
--2023-01-06 09:30:20-- https://repo.huaweicloud.com/docker-ce/linux/centos/docker-ce.repo
Resolving repo.huaweicloud.com (repo.huaweicloud.com)... 123.125.16.221, 123.125.16.224, 123.125.16.226, ...
Connecting to repo.huaweicloud.com (repo.huaweicloud.com)|123.125.16.221|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1919 (1.9K) [application/octet-stream]
Saving to: ‘/etc/yum.repos.d/docker-ce.repo’
100%[===================================================================================================>] 1,919 --.-K/s in 0s
2023-01-06 09:30:20 (423 MB/s) - ‘/etc/yum.repos.d/docker-ce.repo’ saved [1919/1919]
[root@master yum.repos.d]# cd /etc/yum.repos.d/
[root@master yum.repos.d]# ls
CentOS-Base.repo CentOS-Debuginfo.repo CentOS-Media.repo CentOS-Vault.repo epel.repo epel-testing.repo
CentOS-CR.repo CentOS-fasttrack.repo CentOS-Sources.repo docker-ce.repo epel.repo.rpmnew
# 安装docker-ce
[root@master yum.repos.d]# yum -y install docker-ce
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
docker-ce-stable | 3.5 kB 00:00:00
(1/2): docker-ce-stable/7/x86_64/primary_db | 91 kB 00:00:00
(2/2): docker-ce-stable/7/x86_64/updateinfo | 55 B 00:00:00
Resolving Dependencies
--> Running transaction check
---> Package docker-ce.x86_64 3:20.10.22-3.el7 will be installed
--> Processing Dependency: container-selinux >= 2:2.74 for package: 3:docker-ce-20.10.22-3.el7.x86_64
--> Processing Dependency: containerd.io >= 1.4.1 for package: 3:docker-ce-20.10.22-3.el7.x86_64
--> Processing Dependency: docker-ce-cli for package: 3:docker-ce-20.10.22-3.el7.x86_64
--> Processing Dependency: docker-ce-rootless-extras for package: 3:docker-ce-20.10.22-3.el7.x86_64
--> Processing Dependency: libcgroup for package: 3:docker-ce-20.10.22-3.el7.x86_64
--> Running transaction check
---> Package container-selinux.noarch 2:2.119.2-1.911c772.el7_8 will be installed
--> Processing Dependency: policycoreutils-python for package: 2:container-selinux-2.119.2-1.911c772.el7_8.noarch
---> Package containerd.io.x86_64 0:1.6.14-3.1.el7 will be installed
---> Package docker-ce-cli.x86_64 1:20.10.22-3.el7 will be installed
--> Processing Dependency: docker-scan-plugin(x86-64) for package: 1:docker-ce-cli-20.10.22-3.el7.x86_64
---> Package docker-ce-rootless-extras.x86_64 0:20.10.22-3.el7 will be installed
--> Processing Dependency: fuse-overlayfs >= 0.7 for package: docker-ce-rootless-extras-20.10.22-3.el7.x86_64
--> Processing Dependency: slirp4netns >= 0.4 for package: docker-ce-rootless-extras-20.10.22-3.el7.x86_64
---> Package libcgroup.x86_64 0:0.41-21.el7 will be installed
--> Running transaction check
---> Package docker-scan-plugin.x86_64 0:0.23.0-3.el7 will be installed
---> Package fuse-overlayfs.x86_64 0:0.7.2-6.el7_8 will be installed
--> Processing Dependency: libfuse3.so.3(FUSE_3.2)(64bit) for package: fuse-overlayfs-0.7.2-6.el7_8.x86_64
--> Processing Dependency: libfuse3.so.3(FUSE_3.0)(64bit) for package: fuse-overlayfs-0.7.2-6.el7_8.x86_64
--> Processing Dependency: libfuse3.so.3()(64bit) for package: fuse-overlayfs-0.7.2-6.el7_8.x86_64
---> Package policycoreutils-python.x86_64 0:2.5-34.el7 will be installed
--> Processing Dependency: setools-libs >= 3.3.8-4 for package: policycoreutils-python-2.5-34.el7.x86_64
--> Processing Dependency: libsemanage-python >= 2.5-14 for package: policycoreutils-python-2.5-34.el7.x86_64
--> Processing Dependency: audit-libs-python >= 2.1.3-4 for package: policycoreutils-python-2.5-34.el7.x86_64
--> Processing Dependency: python-IPy for package: policycoreutils-python-2.5-34.el7.x86_64
--> Processing Dependency: libqpol.so.1(VERS_1.4)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
--> Processing Dependency: libqpol.so.1(VERS_1.2)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
--> Processing Dependency: libapol.so.4(VERS_4.0)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
--> Processing Dependency: checkpolicy for package: policycoreutils-python-2.5-34.el7.x86_64
--> Processing Dependency: libqpol.so.1()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
--> Processing Dependency: libapol.so.4()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
---> Package slirp4netns.x86_64 0:0.4.3-4.el7_8 will be installed
--> Running transaction check
---> Package audit-libs-python.x86_64 0:2.8.5-4.el7 will be installed
---> Package checkpolicy.x86_64 0:2.5-8.el7 will be installed
---> Package fuse3-libs.x86_64 0:3.6.1-4.el7 will be installed
---> Package libsemanage-python.x86_64 0:2.5-14.el7 will be installed
---> Package python-IPy.noarch 0:0.75-6.el7 will be installed
---> Package setools-libs.x86_64 0:3.3.8-4.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================================
Installing:
docker-ce x86_64 3:20.10.22-3.el7 docker-ce-stable 22 M
Installing for dependencies:
audit-libs-python x86_64 2.8.5-4.el7 base 76 k
checkpolicy x86_64 2.5-8.el7 base 295 k
container-selinux noarch 2:2.119.2-1.911c772.el7_8 extras 40 k
containerd.io x86_64 1.6.14-3.1.el7 docker-ce-stable 33 M
docker-ce-cli x86_64 1:20.10.22-3.el7 docker-ce-stable 30 M
docker-ce-rootless-extras x86_64 20.10.22-3.el7 docker-ce-stable 8.5 M
docker-scan-plugin x86_64 0.23.0-3.el7 docker-ce-stable 3.8 M
fuse-overlayfs x86_64 0.7.2-6.el7_8 extras 54 k
fuse3-libs x86_64 3.6.1-4.el7 extras 82 k
libcgroup x86_64 0.41-21.el7 base 66 k
libsemanage-python x86_64 2.5-14.el7 base 113 k
policycoreutils-python x86_64 2.5-34.el7 base 457 k
python-IPy noarch 0.75-6.el7 base 32 k
setools-libs x86_64 3.3.8-4.el7 base 620 k
slirp4netns x86_64 0.4.3-4.el7_8 extras 81 k
Transaction Summary
=============================================================================================================================================
Install 1 Package (+15 Dependent packages)
Total download size: 98 M
Installed size: 361 M
Downloading packages:
(1/16): audit-libs-python-2.8.5-4.el7.x86_64.rpm | 76 kB 00:00:00
(2/16): checkpolicy-2.5-8.el7.x86_64.rpm | 295 kB 00:00:00
(3/16): container-selinux-2.119.2-1.911c772.el7_8.noarch.rpm | 40 kB 00:00:00
warning: /var/cache/yum/x86_64/7/docker-ce-stable/packages/containerd.io-1.6.14-3.1.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
Public key for containerd.io-1.6.14-3.1.el7.x86_64.rpm is not installed
(4/16): containerd.io-1.6.14-3.1.el7.x86_64.rpm | 33 MB 00:00:13
(5/16): docker-ce-cli-20.10.22-3.el7.x86_64.rpm | 30 MB 00:00:27
(6/16): docker-ce-rootless-extras-20.10.22-3.el7.x86_64.rpm | 8.5 MB 00:00:07
(7/16): fuse-overlayfs-0.7.2-6.el7_8.x86_64.rpm | 54 kB 00:00:00
(8/16): libsemanage-python-2.5-14.el7.x86_64.rpm | 113 kB 00:00:00
(9/16): policycoreutils-python-2.5-34.el7.x86_64.rpm | 457 kB 00:00:00
(10/16): python-IPy-0.75-6.el7.noarch.rpm | 32 kB 00:00:00
(11/16): setools-libs-3.3.8-4.el7.x86_64.rpm | 620 kB 00:00:00
(12/16): slirp4netns-0.4.3-4.el7_8.x86_64.rpm | 81 kB 00:00:00
(13/16): libcgroup-0.41-21.el7.x86_64.rpm | 66 kB 00:00:00
(14/16): fuse3-libs-3.6.1-4.el7.x86_64.rpm | 82 kB 00:00:00
(15/16): docker-scan-plugin-0.23.0-3.el7.x86_64.rpm | 3.8 MB 00:00:04
(16/16): docker-ce-20.10.22-3.el7.x86_64.rpm | 22 MB 00:00:59
---------------------------------------------------------------------------------------------------------------------------------------------
Total 1.6 MB/s | 98 MB 00:00:59
Retrieving key from https://download.docker.com/linux/centos/gpg
Importing GPG key 0x621E9F35:
Userid : "Docker Release (CE rpm) <[email protected]>"
Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35
From : https://download.docker.com/linux/centos/gpg
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : libcgroup-0.41-21.el7.x86_64 1/16
Installing : setools-libs-3.3.8-4.el7.x86_64 2/16
Installing : audit-libs-python-2.8.5-4.el7.x86_64 3/16
Installing : fuse3-libs-3.6.1-4.el7.x86_64 4/16
Installing : fuse-overlayfs-0.7.2-6.el7_8.x86_64 5/16
Installing : checkpolicy-2.5-8.el7.x86_64 6/16
Installing : python-IPy-0.75-6.el7.noarch 7/16
Installing : slirp4netns-0.4.3-4.el7_8.x86_64 8/16
Installing : libsemanage-python-2.5-14.el7.x86_64 9/16
Installing : policycoreutils-python-2.5-34.el7.x86_64 10/16
Installing : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 11/16
setsebool: SELinux is disabled.
Installing : containerd.io-1.6.14-3.1.el7.x86_64 12/16
Installing : docker-scan-plugin-0.23.0-3.el7.x86_64 13/16
Installing : 1:docker-ce-cli-20.10.22-3.el7.x86_64 14/16
Installing : docker-ce-rootless-extras-20.10.22-3.el7.x86_64 15/16
Installing : 3:docker-ce-20.10.22-3.el7.x86_64 16/16
Verifying : 3:docker-ce-20.10.22-3.el7.x86_64 1/16
Verifying : docker-scan-plugin-0.23.0-3.el7.x86_64 2/16
Verifying : docker-ce-rootless-extras-20.10.22-3.el7.x86_64 3/16
Verifying : fuse-overlayfs-0.7.2-6.el7_8.x86_64 4/16
Verifying : libsemanage-python-2.5-14.el7.x86_64 5/16
Verifying : slirp4netns-0.4.3-4.el7_8.x86_64 6/16
Verifying : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 7/16
Verifying : 1:docker-ce-cli-20.10.22-3.el7.x86_64 8/16
Verifying : python-IPy-0.75-6.el7.noarch 9/16
Verifying : checkpolicy-2.5-8.el7.x86_64 10/16
Verifying : containerd.io-1.6.14-3.1.el7.x86_64 11/16
Verifying : policycoreutils-python-2.5-34.el7.x86_64 12/16
Verifying : fuse3-libs-3.6.1-4.el7.x86_64 13/16
Verifying : audit-libs-python-2.8.5-4.el7.x86_64 14/16
Verifying : setools-libs-3.3.8-4.el7.x86_64 15/16
Verifying : libcgroup-0.41-21.el7.x86_64 16/16
Installed:
docker-ce.x86_64 3:20.10.22-3.el7
Dependency Installed:
audit-libs-python.x86_64 0:2.8.5-4.el7 checkpolicy.x86_64 0:2.5-8.el7 container-selinux.noarch 2:2.119.2-1.911c772.el7_8
containerd.io.x86_64 0:1.6.14-3.1.el7 docker-ce-cli.x86_64 1:20.10.22-3.el7 docker-ce-rootless-extras.x86_64 0:20.10.22-3.el7
docker-scan-plugin.x86_64 0:0.23.0-3.el7 fuse-overlayfs.x86_64 0:0.7.2-6.el7_8 fuse3-libs.x86_64 0:3.6.1-4.el7
libcgroup.x86_64 0:0.41-21.el7 libsemanage-python.x86_64 0:2.5-14.el7 policycoreutils-python.x86_64 0:2.5-34.el7
python-IPy.noarch 0:0.75-6.el7 setools-libs.x86_64 0:3.3.8-4.el7 slirp4netns.x86_64 0:0.4.3-4.el7_8
Complete!
# 配置镜像加速器
[root@master yum.repos.d]# mkdir /etc/docker
[root@master yum.repos.d]# cat <<EOF> /etc/docker/daemon.json
{
"exec-opts": ["native.cgroupdriver=systemd"],
"registry-mirrors": ["https://kn0t2bca.mirror.aliyuncs.com"]
}
EOF
# 启动docker
[root@master yum.repos.d]# systemctl enable --now docker
Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
11 安装Kubernetes组件
# 配置kubernetes yum源(这里实验就17版本)
[root@master ~]# vi /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://repo.huaweicloud.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgchech=0
repo_gpgcheck=0
gpgkey=https://repo.huaweicloud.com/kubernetes/yum/doc/yum-key.gpg
https://repo.huaweicloud.com/kubernetes/yum/doc/rpm-package-key.gpg
# 安装kubernetes
[root@master ~]# yum install -y kubeadm-1.17.4-0 kubelet-1.17.4-0 kubectl-1.17.4-0
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
kubernetes | 1.4 kB 00:00:00
kubernetes/primary | 102 kB 00:00:00
kubernetes 751/751
Resolving Dependencies
--> Running transaction check
---> Package kubeadm.x86_64 0:1.17.4-0 will be installed
--> Processing Dependency: kubernetes-cni >= 0.7.5 for package: kubeadm-1.17.4-0.x86_64
--> Processing Dependency: cri-tools >= 1.13.0 for package: kubeadm-1.17.4-0.x86_64
---> Package kubectl.x86_64 0:1.17.4-0 will be installed
---> Package kubelet.x86_64 0:1.17.4-0 will be installed
--> Processing Dependency: socat for package: kubelet-1.17.4-0.x86_64
--> Processing Dependency: conntrack for package: kubelet-1.17.4-0.x86_64
--> Running transaction check
---> Package conntrack-tools.x86_64 0:1.4.4-7.el7 will be installed
--> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.1)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
--> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
--> Processing Dependency: libnetfilter_cthelper.so.0(LIBNETFILTER_CTHELPER_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
--> Processing Dependency: libnetfilter_queue.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
--> Processing Dependency: libnetfilter_cttimeout.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
--> Processing Dependency: libnetfilter_cthelper.so.0()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
---> Package cri-tools.x86_64 0:1.19.0-0 will be installed
---> Package kubernetes-cni.x86_64 0:0.8.7-0 will be installed
---> Package socat.x86_64 0:1.7.3.2-2.el7 will be installed
--> Running transaction check
---> Package libnetfilter_cthelper.x86_64 0:1.0.0-11.el7 will be installed
---> Package libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7 will be installed
---> Package libnetfilter_queue.x86_64 0:1.0.2-2.el7_2 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================================
Installing:
kubeadm x86_64 1.17.4-0 kubernetes 8.7 M
kubectl x86_64 1.17.4-0 kubernetes 9.4 M
kubelet x86_64 1.17.4-0 kubernetes 20 M
Installing for dependencies:
conntrack-tools x86_64 1.4.4-7.el7 base 187 k
cri-tools x86_64 1.19.0-0 kubernetes 5.7 M
kubernetes-cni x86_64 0.8.7-0 kubernetes 19 M
libnetfilter_cthelper x86_64 1.0.0-11.el7 base 18 k
libnetfilter_cttimeout x86_64 1.0.0-7.el7 base 18 k
libnetfilter_queue x86_64 1.0.2-2.el7_2 base 23 k
socat x86_64 1.7.3.2-2.el7 base 290 k
Transaction Summary
=============================================================================================================================================
Install 3 Packages (+7 Dependent packages)
Total download size: 63 M
Installed size: 266 M
Downloading packages:
(1/10): conntrack-tools-1.4.4-7.el7.x86_64.rpm | 187 kB 00:00:00
warning: /var/cache/yum/x86_64/7/kubernetes/packages/67ffa375b03cea72703fe446ff00963919e8fce913fbc4bb86f06d1475a6bdf9-cri-tools-1.19.0-0.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 3e1ba8d5: NOKEY
Public key for 67ffa375b03cea72703fe446ff00963919e8fce913fbc4bb86f06d1475a6bdf9-cri-tools-1.19.0-0.x86_64.rpm is not installed
(2/10): 67ffa375b03cea72703fe446ff00963919e8fce913fbc4bb86f06d1475a6bdf9-cri-tools-1.19.0-0.x86_64.rpm | 5.7 MB 00:00:00
(3/10): 0767753f85f415bbdf1df0e974eafccb653bee06149600c3ee05b903bdc897ba-kubeadm-1.17.4-0.x86_64.rpm | 8.7 MB 00:00:00
(4/10): 06400b25ef3577561502f9a7a126bf4975c03b30aca0fb19bb636f870ab93876-kubectl-1.17.4-0.x86_64.rpm | 9.4 MB 00:00:00
(5/10): libnetfilter_cttimeout-1.0.0-7.el7.x86_64.rpm | 18 kB 00:00:00
(6/10): 0c45baca5fcc05bb75f1e953ecaf85844efac01bf9c1ef3c219f2b41eade3168-kubelet-1.17.4-0.x86_64.rpm | 20 MB 00:00:00
(7/10): libnetfilter_queue-1.0.2-2.el7_2.x86_64.rpm | 23 kB 00:00:00
(8/10): socat-1.7.3.2-2.el7.x86_64.rpm | 290 kB 00:00:00
(9/10): libnetfilter_cthelper-1.0.0-11.el7.x86_64.rpm | 18 kB 00:00:00
(10/10): db7cb5cb0b3f6875f54d10f02e625573988e3e91fd4fc5eef0b1876bb18604ad-kubernetes-cni-0.8.7-0.x86_64.rpm | 19 MB 00:00:10
---------------------------------------------------------------------------------------------------------------------------------------------
Total 5.9 MB/s | 63 MB 00:00:10
Retrieving key from https://repo.huaweicloud.com/kubernetes/yum/doc/yum-key.gpg
Importing GPG key 0x307EA071:
Userid : "Rapture Automatic Signing Key (cloud-rapture-signing-key-2021-03-01-08_01_09.pub)"
Fingerprint: 7f92 e05b 3109 3bef 5a3c 2d38 feea 9169 307e a071
From : https://repo.huaweicloud.com/kubernetes/yum/doc/yum-key.gpg
Importing GPG key 0x836F4BEB:
Userid : "gLinux Rapture Automatic Signing Key (//depot/google3/production/borg/cloud-rapture/keys/cloud-rapture-pubkeys/cloud-rapture-signing-key-2020-12-03-16_08_05.pub) <[email protected]>"
Fingerprint: 59fe 0256 8272 69dc 8157 8f92 8b57 c5c2 836f 4beb
From : https://repo.huaweicloud.com/kubernetes/yum/doc/yum-key.gpg
Retrieving key from https://repo.huaweicloud.com/kubernetes/yum/doc/rpm-package-key.gpg
Importing GPG key 0x3E1BA8D5:
Userid : "Google Cloud Packages RPM Signing Key <[email protected]>"
Fingerprint: 3749 e1ba 95a8 6ce0 5454 6ed2 f09c 394c 3e1b a8d5
From : https://repo.huaweicloud.com/kubernetes/yum/doc/rpm-package-key.gpg
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : libnetfilter_cthelper-1.0.0-11.el7.x86_64 1/10
Installing : socat-1.7.3.2-2.el7.x86_64 2/10
Installing : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 3/10
Installing : libnetfilter_queue-1.0.2-2.el7_2.x86_64 4/10
Installing : conntrack-tools-1.4.4-7.el7.x86_64 5/10
Installing : kubernetes-cni-0.8.7-0.x86_64 6/10
Installing : kubelet-1.17.4-0.x86_64 7/10
Installing : kubectl-1.17.4-0.x86_64 8/10
Installing : cri-tools-1.19.0-0.x86_64 9/10
Installing : kubeadm-1.17.4-0.x86_64 10/10
Verifying : cri-tools-1.19.0-0.x86_64 1/10
Verifying : conntrack-tools-1.4.4-7.el7.x86_64 2/10
Verifying : kubernetes-cni-0.8.7-0.x86_64 3/10
Verifying : kubeadm-1.17.4-0.x86_64 4/10
Verifying : kubectl-1.17.4-0.x86_64 5/10
Verifying : libnetfilter_queue-1.0.2-2.el7_2.x86_64 6/10
Verifying : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 7/10
Verifying : socat-1.7.3.2-2.el7.x86_64 8/10
Verifying : kubelet-1.17.4-0.x86_64 9/10
Verifying : libnetfilter_cthelper-1.0.0-11.el7.x86_64 10/10
Installed:
kubeadm.x86_64 0:1.17.4-0 kubectl.x86_64 0:1.17.4-0 kubelet.x86_64 0:1.17.4-0
Dependency Installed:
conntrack-tools.x86_64 0:1.4.4-7.el7 cri-tools.x86_64 0:1.19.0-0 kubernetes-cni.x86_64 0:0.8.7-0
libnetfilter_cthelper.x86_64 0:1.0.0-11.el7 libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7 libnetfilter_queue.x86_64 0:1.0.2-2.el7_2
socat.x86_64 0:1.7.3.2-2.el7
Complete!
# 配置kubelet的cgroup
[root@master ~]# vi /etc/sysconfig/kubelet
KUBELET_CGROUP_ARGS="--cgroup-driver=systemd"
KUBE_PROXY_MODE="ipvs"
# 设置开机自启
[root@master ~]# systemctl enable kubelet
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
12 查看集群所需镜像
[root@master ~]# kubeadm config images list
I0106 09:35:08.828094 1981 version.go:251] remote version is much newer: v1.26.0; falling back to: stable-1.17
W0106 09:35:09.558699 1981 validation.go:28] Cannot validate kube-proxy config - no validator is available
W0106 09:35:09.558714 1981 validation.go:28] Cannot validate kubelet config - no validator is available
k8s.gcr.io/kube-apiserver:v1.17.17
k8s.gcr.io/kube-controller-manager:v1.17.17
k8s.gcr.io/kube-scheduler:v1.17.17
k8s.gcr.io/kube-proxy:v1.17.17
k8s.gcr.io/pause:3.1
k8s.gcr.io/etcd:3.4.3-0
k8s.gcr.io/coredns:1.6.5
三、集群部署
1 集群初始化
master节点
#创建集群
[root@master ~]# kubeadm init \
--apiserver-advertise-address=192.168.0.10 \
--image-repository registry.aliyuncs.com/google_containers \
--kubernetes-version v1.18.0 \
--service-cidr=10.96.0.0/12 \
--pod-network-cidr=10.244.0.0/16
W0106 09:44:58.157182 2522 validation.go:28] Cannot validate kube-proxy config - no validator is available
W0106 09:44:58.157221 2522 validation.go:28] Cannot validate kubelet config - no validator is available
[init] Using Kubernetes version: v1.18.0
[preflight] Running pre-flight checks
[WARNING KubernetesVersion]: Kubernetes version is greater than kubeadm version. Please consider to upgrade kubeadm. Kubernetes version: 1.18.0. Kubeadm version: 1.17.x
[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 20.10.22. Latest validated version: 19.03
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.0.10]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [master localhost] and IPs [192.168.0.10 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [master localhost] and IPs [192.168.0.10 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
W0106 09:47:43.270684 2522 manifests.go:214] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[control-plane] Creating static Pod manifest for "kube-scheduler"
W0106 09:47:43.271723 2522 manifests.go:214] the default kube-apiserver authorization-mode is "Node,RBAC"; using "Node,RBAC"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 14.501687 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.18" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node master as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node master as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: a3um0n.m1pdmcn4l6ci3j35
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join 192.168.0.10:6443 --token a3um0n.m1pdmcn4l6ci3j35 \
--discovery-token-ca-cert-hash sha256:7103a2a4eabde7dcaba47ff5e3acf91a170229bd0d31e66a99d4e0df917ce8db
# 创建配置文件
[root@master ~]# mkdir -p $HOME/.kube
[root@master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
node节点
[root@node01 ~]# kubeadm join 192.168.0.10:6443 --token a3um0n.m1pdmcn4l6ci3j35 \
> --discovery-token-ca-cert-hash sha256:7103a2a4eabde7dcaba47ff5e3acf91a170229bd0d31e66a99d4e0df917ce8db
W0106 09:49:49.764498 2491 join.go:346] [preflight] WARNING: JoinControlPane.controlPlane settings will be ignored when control-plane flag is not set.
[preflight] Running pre-flight checks
[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 20.10.22. Latest validated version: 19.03
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.18" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
[root@node02 ~]# kubeadm join 192.168.0.10:6443 --token a3um0n.m1pdmcn4l6ci3j35 \
> --discovery-token-ca-cert-hash sha256:7103a2a4eabde7dcaba47ff5e3acf91a170229bd0d31e66a99d4e0df917ce8db
W0106 09:49:58.874119 2434 join.go:346] [preflight] WARNING: JoinControlPane.controlPlane settings will be ignored when control-plane flag is not set.
[preflight] Running pre-flight checks
[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 20.10.22. Latest validated version: 19.03
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.18" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.
Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
查看节点信息
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master NotReady master 4m27s v1.17.4
node01 NotReady <none> 2m18s v1.17.4
node02 NotReady <none> 2m23s v1.17.4
# 默认的token有效期为2小时,可设置永久不过期的token
[root@master ~]# kubeadm token create --ttl 0 --print-join-command
W0106 10:03:20.495178 7227 validation.go:28] Cannot validate kube-proxy config - no validator is available
W0106 10:03:20.495209 7227 validation.go:28] Cannot validate kubelet config - no validator is available
kubeadm join 192.168.0.10:6443 --token ovprzv.ejx1hfx5xqq7q1w4 --discovery-token-ca-cert-hash sha256:7103a2a4eabde7dcaba47ff5e3acf91a170229bd0d31e66a99d4e0df917ce8db
2 安装网络插件
master节点
[root@master ~]# wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
--2023-01-06 10:08:06-- https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.111.133, 185.199.110.133, 185.199.108.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.111.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4621 (4.5K) [text/plain]
Saving to: ‘kube-flannel.yml’
100%[===================================================================================================>] 4,621 --.-K/s in 0s
2023-01-06 10:08:07 (78.7 MB/s) - ‘kube-flannel.yml’ saved [4621/4621]
3 启动网络插件
master节点
[root@master ~]# kubectl apply -f kube-flannel.yml
namespace/kube-flannel created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds created
4 查看状态
master节点
# 查看网络插件状态
[root@master ~]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-5dbbf58dbf-j4vsr 1/1 Running 0 2m37s
coredns-5dbbf58dbf-xrhfr 1/1 Running 0 2m37s
etcd-master 1/1 Running 0 2m54s
kube-apiserver-master 1/1 Running 0 2m54s
kube-controller-manager-master 1/1 Running 0 2m54s
kube-proxy-75wjv 1/1 Running 0 2m37s
kube-proxy-bdxtl 1/1 Running 0 2m23s
kube-proxy-pzrt2 1/1 Running 0 2m19s
kube-scheduler-master 1/1 Running 0 2m54s
# 查看节点状态
[root@master ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master Ready master 3m5s v1.17.4
node01 Ready <none> 2m32s v1.17.4
node02 Ready <none> 2m28s v1.17.4
# 查看集群健康状况
[root@master ~]# kubectl get cs
NAME STATUS MESSAGE ERROR
scheduler Healthy ok
controller-manager Healthy ok
etcd-0 Healthy {"health":"true"}
[root@master ~]# kubectl cluster-info
Kubernetes master is running at https://192.168.0.10:6443
KubeDNS is running at https://192.168.0.10:6443/api/v1/namespaces/kube-system/services/kube-dns:dns/proxy
To further debug and diagnose cluster problems, use 'kubectl cluster-info dump'.
四、集群测试
# 创建nginx服务
[root@master ~]# kubectl create deployment nginx --image=nginx:1.14-alpine
deployment.apps/nginx created
# 暴露端口
[root@master ~]# kubectl expose deploy nginx --port=80 --target-port=80 --type=NodePort
service/nginx exposed
# 查看服务
[root@master ~]# kubectl get pod,svc
NAME READY STATUS RESTARTS AGE
pod/nginx-55f8fd7cfc-fc2pk 1/1 Running 0 42s
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
service/kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 7m3s
service/nginx NodePort 10.100.97.193 <none> 80:31429/TCP 19s
# 查看pod
[root@master ~]# kubectl get pod
NAME READY STATUS RESTARTS AGE
nginx-55f8fd7cfc-fc2pk 1/1 Running 0 117s
标签：00,
x86,
Kubernetes,
部署,
--,
64,
master,
el7
From： https://www.cnblogs.com/kongshuo/p/17027890.html