Haproxy+PaceMaker实验配置：
server1,server2:集群节点
server3,server4:后端服务器
在server1配置haproxy:
[root@server1 ~]# ls
asciidoc-8.4.5-4.1.el6.noarch.rpm libnfnetlink-devel-1.0.0-1.el6.x86_64.rpm
haproxy-1.6.11.tar.gz lvs-fullnat-synproxy
keepalived-2.0.6 Lvs-fullnat-synproxy.tar.gz
keepalived-2.0.6.tar.gz newt-devel-0.52.11-3.el6.x86_64.rpm
kernel-2.6.32-220.23.1.el6.src.rpm rpmbuild
ldirectord-3.9.5-3.1.x86_64.rpm slang-devel-2.2.1-1.el6.x86_64.rpm
[root@server1 ~]# yum install rpm-build -y 安装rpmbuild制作rpm包的工具
[root@server1 ~]# rpmbuild -tb haproxy-1.6.11.tar.gz
error: Failed build dependencies:
pcre-devel is needed by haproxy-1.6.11-1.x86_64
[root@server1 ~]# yum install pcre-devel -y 解决依赖性
[root@server1 ~]# rpmbuild -tb haproxy-1.6.11.tar.gz 制作包编译
[root@server1 ~]# cd rpmbuild/RPMS/
[root@server1 RPMS]# ls
x86_64
[root@server1 RPMS]# cd x86_64/
[root@server1 x86_64]# ls
haproxy-1.6.11-1.x86_64.rpm haproxy-debuginfo-1.6.11-1.x86_64.rpm
[root@server1 x86_64]# rpm -qpl haproxy-1.6.11-1.x86_64.rpm 查看安装了那些软件
/etc/haproxy
/etc/rc.d/init.d/haproxy
/usr/sbin/haproxy
/usr/share/doc/haproxy-1.6.11
/usr/share/doc/haproxy-1.6.11/CHANGELOG
/usr/share/doc/haproxy-1.6.11/README
/usr/share/doc/haproxy-1.6.11/architecture.txt
/usr/share/doc/haproxy-1.6.11/configuration.txt
/usr/share/doc/haproxy-1.6.11/intro.txt
/usr/share/doc/haproxy-1.6.11/management.txt
/usr/share/doc/haproxy-1.6.11/proxy-protocol.txt
/usr/share/man/man1/haproxy.1.gz
[root@server1 x86_64]# ls
haproxy-1.6.11-1.x86_64.rpm haproxy-debuginfo-1.6.11-1.x86_64.rpm
[root@server1 x86_64]# rpm -ivh haproxy-1.6.11-1.x86_64.rpm 安装haproxy
Preparing... ########################################### [100%]
1:haproxy ########################################### [100%]
[root@server1 x86_64]# cd
[root@server1 ~]# ls
asciidoc-8.4.5-4.1.el6.noarch.rpm libnfnetlink-devel-1.0.0-1.el6.x86_64.rpm
haproxy-1.6.11.tar.gz lvs-fullnat-synproxy
keepalived-2.0.6 Lvs-fullnat-synproxy.tar.gz
keepalived-2.0.6.tar.gz newt-devel-0.52.11-3.el6.x86_64.rpm
kernel-2.6.32-220.23.1.el6.src.rpm rpmbuild
ldirectord-3.9.5-3.1.x86_64.rpm slang-devel-2.2.1-1.el6.x86_64.rpm
[root@server1 ~]# tar zxf haproxy-1.6.11.tar.gz 解压源码包
[root@server1 ~]# ls
asciidoc-8.4.5-4.1.el6.noarch.rpm libnfnetlink-devel-1.0.0-1.el6.x86_64.rpm
haproxy-1.6.11 lvs-fullnat-synproxy
haproxy-1.6.11.tar.gz Lvs-fullnat-synproxy.tar.gz
keepalived-2.0.6 newt-devel-0.52.11-3.el6.x86_64.rpm
keepalived-2.0.6.tar.gz rpmbuild
kernel-2.6.32-220.23.1.el6.src.rpm slang-devel-2.2.1-1.el6.x86_64.rpm
ldirectord-3.9.5-3.1.x86_64.rpm
[root@server1 ~]# cd haproxy-1.6.11 进入解压好的路径
[root@server1 haproxy-1.6.11]# ls
CHANGELOG CONTRIBUTING ebtree include MAINTAINERS README src tests VERSION
contrib doc examples LICENSE Makefile ROADMAP SUBVERS VERDATE
[root@server1 haproxy-1.6.11]# find -name *.spec
./examples/haproxy.spec
[root@server1 haproxy-1.6.11]# ls
CHANGELOG CONTRIBUTING ebtree include MAINTAINERS README src tests VERSION
contrib doc examples LICENSE Makefile ROADMAP SUBVERS VERDATE
[root@server1 haproxy-1.6.11]# cd examples/
[root@server1 examples]# ls
acl-content-sw.cfg debug2ansi haproxy.spec ssl.cfg
auth.cfg debug2html haproxy.vim stats_haproxy.sh
check debugfind init.haproxy transparent_proxy.cfg
check.conf errorfiles option-http_proxy.cfg
content-sw-sample.cfg haproxy.init seamless_reload.txt
[root@server1 examples]# cp content-sw-sample.cfg /etc/haproxy/haproxy.cfg 复制文件
[root@server1 examples]# cd /etc/haproxy/
[root@server1 haproxy]# ls
haproxy.cfg
[root@server1 haproxy]# groupadd -g 200 haproxy 建立组
[root@server1 haproxy]# useradd -u 200 -g 200 -M haproxy 建立用户
[root@server1 haproxy]# id haproxy 查看用户
uid=200(haproxy) gid=200(haproxy) groups=200(haproxy)
[root@server1 haproxy]# su - haproxy 可以切换到haproxy只是提供了一个shell而已
su: warning: cannot change directory to /home/haproxy: No such file or directory
-bash-4.1$ logout
[root@server1 haproxy]# vim /etc/security/limits.conf 编辑填写最大文件数
[root@server1 haproxy]# vim haproxy.cfg 编写配置文件写入健康检查监控以及后端IP
[root@server1 haproxy]# /etc/init.d/haproxy restart 重启服务
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
在两个后端打开阿帕奇写入访问文件：
在网页测试haproxy的轮询：
在网页测试haproxy的健康检查：
在网页测试haproxy的监控：
Haproxy有8种负载均衡算法-
1.balance roundrobin # 轮询，软负载均衡基本都具备这种算法
2.balance static-rr # 根据权重，建议使用
3.balance leastconn # 最少连接者先处理，建议使用
4.balance source # 根据请求源IP，建议使用
5.balance uri # 根据请求的URI
6.balance url_param，# 根据请求的URl参数'balance url_param' requires an URL parameter name
7.balance hdr(name) # 根据HTTP请求头来锁定每一次HTTP请求
8.balance rdp-cookie(name) # 根据据cookie(name)来锁定并哈希每一次TCP请求
演示source的算法：
[root@server1 log]# vim /etc/rsyslog.conf 编写日至的配置文件
[root@server1 log]# /etc/init.d/rsyslog restart 重启服务
Shutting down system logger: [ OK ]
Starting system logger: [ OK ]
[root@server1 log]# cd /var/log/
[root@server1 log]# ll haproxy.log
-rw------- 1 root root 350 Aug 4 11:38 haproxy.log
[root@server1 log]# cat haproxy.log刷新一个网页会有新的日至生成
Aug 4 11:04:52 localhost haproxy[4245]: 172.25.38.250:51558 [04/Aug/2018:11:04:52.212] public public/<STATS> 0/0/0/0/0 200 14840 - - LR-- 1/1/0/0/0 0/0 "GET /admin/stats HTTP/1.1"
Aug 4 11:38:48 localhost haproxy[4245]: 172.25.38.250:51892 [04/Aug/2018:11:38:48.299] public static/statsrv1 0/0/0/0/0 200 282 - - ---- 1/1/0/0/0 0/0 "GET / HTTP/1.1"
[root@server1 log]# cat haproxy.log
Aug 4 11:04:52 localhost haproxy[4245]: 172.25.38.250:51558 [04/Aug/2018:11:04:52.212] public public/<STATS> 0/0/0/0/0 200 14840 - - LR-- 1/1/0/0/0 0/0 "GET /admin/stats HTTP/1.1"
Aug 4 11:38:48 localhost haproxy[4245]: 172.25.38.250:51892 [04/Aug/2018:11:38:48.299] public static/statsrv1 0/0/0/0/0 200 282 - - ---- 1/1/0/0/0 0/0 "GET / HTTP/1.1"
Aug 4 11:45:35 localhost haproxy[4245]: 172.25.38.250:51904 [04/Aug/2018:11:45:35.865] public static/statsrv2 0/0/0/0/0 200 282 - - ---- 1/1/0/1/0 0/0 "GET / HTTP/1.1"
Aug 4 11:45:36 localhost haproxy[4245]: 172.25.38.250:51904 [04/Aug/2018:11:45:35.866] public static/statsrv1 680/0/0/1/681 200 282 - - ---- 1/1/0/1/0 0/0 "GET / HTTP/1.1"
[root@server1 log]# vim /etc/haproxy/haproxy.cfg 更改算法
[root@server1 log]# /etc/init.d/haproxy restart
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
在server3关闭和开启阿帕其分别在网页测试：（bbs.westos.com）
关闭之后为server4的默认发布文件
打开之后默认访问为server3.这个是算法本身的问题：
用php网页测试动静分离：
在server1更改haproxy的配置文件：
[root@server1 log]# vim /etc/haproxy/haproxy.cfg 编辑haproxy配置文件
[root@server1 log]# /etc/init.d/haproxy restart 重启服务
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
在server3:(172.25.38.4)安装php进行测试：
[root@server3 html]# yum install php -y 安装php
[root@server3 html]# /etc/init.d/httpd restart
[root@server3 html]# cd /var/www/html/
[root@server3 html]# ls
index.html
[root@server3 html]# vim index.php 写入php访问文件
在网页测试用server3本身IP可以调用证明服务是OK的：
在server1更改配置文件，当不同的访问出来不同的界面，阿帕奇和php分开，实现动静分离：
[root@server1 log]# vim /etc/haproxy/haproxy.cfg 加入具体的访问指向
[root@server1 log]# /etc/init.d/haproxy restart
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
在网页进行测试调用不同的文件可以看到不同的界面实现了动静分离：
在server1更改配置文件实现重定向:
[root@server1 log]# vim /etc/haproxy/haproxy.cfg 编辑配置文件
[root@server1 log]# /etc/init.d/haproxy restart
Shutting down haproxy: [ OK ]
Starting haproxy: [WARNING] 215/130011 (4415) : parsing [/etc/haproxy/haproxy.cfg:44] : The 'block' directive is now deprecated in favor of 'http-request deny' which uses the exact same syntax. The rules are translated but support might disappear in a future version.
[ OK ]
在网页测试会报错403：
在server1进行配置不允许报错403：
[root@server1 log]# vim /etc/haproxy/haproxy.cfg 加入报错信息的指向，给用户智能提示
[root@server1 log]# yum install httpd -y 安装httpd
Loaded plugins: product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Setting up Install Process
Package httpd-2.2.15-29.el6_4.x86_64 already installed and latest version
Nothing to do
[root@server1 log]# vim /etc/httpd/conf/httpd.conf 更改为8080端口，不占用端口
[root@server1 log]# cd /var/www/html/ 到阿帕其默认发布目录下
[root@server1 html]# ls
index.html
[root@server1 html]# cat index.html 加入智能提示
server1 ----->此站点正在维护
[root@server1 html]# /etc/init.d/httpd start 开启阿帕其
Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 172.25.38.2 for ServerName
[ OK ]
[root@server1 html]# /etc/init.d/httpd restart 重启服务保证服务生效
Stopping httpd: [ OK ]
Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 172.25.38.2 for ServerName
[ OK ]
[root@server1 html]# /etc/init.d/haproxy restart
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
在网页测试：
在另外一台可以看到重定向：
[root@server2 html]# curl 172.25.38.2
[root@server2 html]# www.westos.org
在server1更改配置：
[root@server1 html]# vim /etc/haproxy/haproxy.cfg
[root@server1 html]# /etc/init.d/haproxy restart
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
在server2看不到重定向：
在server1更改配置测试重定向：
[root@server1 html]# vim /etc/haproxy/haproxy.cfg 调用本机IP指向的是server3，访问server3安装的PHP
[root@server1 html]# /etc/init.d/haproxy restart
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
在网页测试：
在我们用taobao.com访问淘宝时会进行两次重定向：
[root@foundation38 Desktop]# curl -I taobao.com 首先定向到http://www.taobao.com/
HTTP/1.1 302 Found
Server: Tengine
Date: Sat, 04 Aug 2018 05:21:43 GMT
Content-Type: text/html
Content-Length: 258
Connection: keep-alive
Location: http://www.taobao.com/
[root@foundation38 Desktop]# curl -I www.taobao.com 再次定向到https://www.taobao.com/进行加加密
HTTP/1.1 302 Found
Server: Tengine
Date: Sat, 04 Aug 2018 05:21:48 GMT
Content-Type: text/html
Content-Length: 258
Connection: keep-alive
Location: https://www.taobao.com/
Set-Cookie: thw=cn; Path=/; Domain=.taobao.com; Expires=Sun, 04-Aug-19 05:21:48 GMT;
Strict-Transport-Security: max-age=31536000
在server1作网址的重定向:
[root@server1 html]# vim /etc/haproxy/haproxy.cfg 访问本机IP时指向www.baidu.com
[root@server1 html]# /etc/init.d/haproxy restart
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
在网页输入172.25.38.2也就是server1的IP会自动调转到百度：
在server1进行配置实现图片的上传：
[root@server1 html]# vim /etc/haproxy/haproxy.cfg 记得注释掉之前的步骤
[root@server1 html]# /etc/init.d/haproxy restart
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
在server4进行配置默认访问目录：
[root@server4 html]# ls
index.html
[root@server4 html]# mkdir images 建立访问目录
[root@server4 html]# cd images/
[root@server4 images]# ls
[root@server4 images]# ls 准备一张图片进行测试
redhat.jpg
在浏览器查看读写分离的测试，调用的是server1的IP，访问的是后端服务器server4的访问目录：
进行图片的上传下载测试读写分离：
在server3:
[root@server3 html]# ls
index.html index.php upload
[root@server3 html]# cd upload/ 写入一个访问目录
[root@server3 upload]# ls
index.php upload_file.php
[root@server3 upload]# mv * ..
mv: overwrite `../index.php'? y 移动到阿帕其默认访问目录下
[root@server3 upload]# cd ..
[root@server3 html]# ls
index.html index.php upload upload_file.php
[root@server3 html]# ll
total 16
-rw-r--r-- 1 root root 15 Jul 29 13:46 index.html
-rw-r--r-- 1 root root 257 Aug 4 14:09 index.php
drwxr-xr-x 2 root root 4096 Aug 4 14:10 upload
-rw-r--r-- 1 root root 927 Aug 4 14:09 upload_file.php
[root@server3 html]# chmod 777 upload 赋予权限
[root@server3 html]# vim upload_file.php 增加图片大小格式
在server4进行相应的配置:
[root@server4 html]# ls
images index.html upload
[root@server4 html]# cd upload/
[root@server4 upload]# ls
index.php upload_file.php
[root@server4 upload]# mv * .. 移动到阿帕其默认访问目录下
[root@server4 upload]# cd ..
[root@server4 html]# ls
images index.html index.php upload upload_file.php
[root@server4 html]# chmod 777 upload 赋予权限
[root@server4 html]# vim upload_file.php 编辑文件更改图片大小
[root@server4 html]# yum install php 安装PHP
[root@server4 html]# /etc/init.d/httpd start 打开阿帕奇
Starting httpd:
[root@server4 html]# /etc/init.d/httpd restart 重启阿帕奇
Stopping httpd: [ OK ]
Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 172.25.38.5 for ServerName
[ OK ]
用server1的IP上传可以看到文件在server3中，因为server1默认以server2的方式上传的，但是上传到了server3实现了读写分离：
在server3中查看：
[root@server3 html]# ls
index.html index.php upload upload_file.php
[root@server3 html]# cd upload
[root@server3 upload]# ls 上传成功
redhat.gif
什么是PaceMaker：
在硬件层面我们可以看到多个节点上启用了不同服务，如数据库，
Apache服务等，这里你可以看到有个standby machine，这
台机器就是当前两个服务不能在它原来的节点上运行时提供备用
的。这样能保证如果某一台机器的Apache服务或者某一台机器
的数据库服务挂了，那么马上在另外一个节点上能够启动该服务。
当然首先这三个节点都是要默认安装这些服务并且做配置的。那
么这样看起来我们能够通过增加节点来提供高可用解决单点故障。
这也是HA要做的主要工作。
pacemaker作为linux系统高可用HA的资源管理器，位于HA集
群架构中的资源管理，资源代理层，它不提供底层心跳信息传递
功能。(心跳信息传递是通过corosync来处理的这个使用有兴
趣的可以在稍微了解一下，其实corosync并不是心跳代理的唯
一组件，可以用hearbeat等来代替)。pacemaker管理资源
是通过脚本的方式来执行的。我们可以将某个服务的管理通过
shell,python等脚本语言进行处理，在多个节点上启动相同
的服务时，如果某个服务在某个节点上出现了单点故障那么pacemaker
会通过资源管理脚本来发现服务在改节点不可用。
pacemaker只是作为HA的资源管理器，所以不要想当然理解它能够
直接管控资源，如果你的资源没有做脚本配置那么对于pacemaker
来说它就是不可管理的。
pacemaker内部组件：
在server2配置pacemaker：：
[root@server2 ~]# yum install pacemaker corosync -y 安装组件
Loaded plugins: product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Setting up Install Process
Package pacemaker-1.1.10-14.el6.x86_64 already installed and latest version
Package corosync-1.4.1-17.el6.x86_64 already installed and latest version
Nothing to do
[root@server2 ~]# cd /etc/corosync/
[root@server2 corosync]# ls
amf.conf.example corosync.conf.example service.d
corosync.conf corosync.conf.example.udpu uidgid.d
[root@server2 corosync]# cp corosync.conf.example corosync.conf
cp: overwrite `corosync.conf'? y
[root@server2 corosync]# vim corosync.conf 编辑配置文件
[root@server2 corosync]# scp corosync.conf server1:/etc/corosync/ 将编辑好的文件传递到另外一个集群节点
root@server1's password:
corosync.conf 100% 479 0.5KB/s 00:00
[root@server2 corosync]# /etc/init.d/corosync start
Starting Corosync Cluster Engine (corosync): [ OK ]
[root@server2 corosync]# cd
[root@server2 ~]# ls
anaconda-ks.cfg install.log pssh-2.3.1-2.1.x86_64.rpm
crmsh-1.2.6-0.rc2.2.1.x86_64.rpm install.log.syslog
[root@server2 ~]# yum install -y crmsh-1.2.6-0.rc2.2.1.x86_64.rpm pssh-2.3.1-2.1.x86_64.rpm 安装组件
Loaded plugins: product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Setting up Install Process
Examining crmsh-1.2.6-0.rc2.2.1.x86_64.rpm: crmsh-1.2.6-0.rc2.2.1.x86_64
crmsh-1.2.6-0.rc2.2.1.x86_64.rpm: does not update installed package.
Examining pssh-2.3.1-2.1.x86_64.rpm: pssh-2.3.1-2.1.x86_64
pssh-2.3.1-2.1.x86_64.rpm: does not update installed package.
Error: Nothing to do
在server1配置pacemaker：
[root@server1 ~]# yum install pacemaker corosync -y 安装服务
Loaded plugins: product-id, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
HighAvailability | 3.9 kB 00:00
LoadBalancer | 3.9 kB 00:00
ResilientStorage | 3.9 kB 00:00
ScalableFileSystem | 3.9 kB 00:00
rhel-source | 3.9 kB 00:00
Setting up Install Process
Package pacemaker-1.1.10-14.el6.x86_64 already installed and latest version
Package corosync-1.4.1-17.el6.x86_64 already installed and latest version
Nothing to do
[root@server1 ~]# cd /etc/corosync/
[root@server1 corosync]# ls 已经传递过来
amf.conf.example corosync.conf.example service.d
corosync.conf corosync.conf.example.udpu uidgid.d
[root@server1 corosync]# /etc/init.d/corosync start 开启服务
Starting Corosync Cluster Engine (corosync): [ OK ]
在server2调用crm进行测试:
[root@server2 ~]# crm
crm(live)# configure
crm(live)configure# show 显示
node server1
node server2
primitive vip ocf:heartbeat:IPaddr2 \
params ip="172.25.38.250" cidr_netmask="24" \
op monitor interval="1min" \
meta target-role="Stopped"
property $id="cib-bootstrap-options" \
dc-version="1.1.10-14.el6-368c726" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false"
crm(live)configure# cd 想要删除已经激活的VIP
crm(live)# resource
crm(live)resource# stop vip 先停止VIP
crm(live)resource# delete vip
ERROR: syntax: delete vip
crm(live)resource# cd ..
crm(live)# cd ..
crm(live)# configure 进入路径
crm(live)configure# delete vip 删除VIP
crm(live)configure# show
node server1
node server2
property $id="cib-bootstrap-options" \
dc-version="1.1.10-14.el6-368c726" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false"
crm(live)configure# property stonith-enabled=false
crm(live)configure# primitive vip ocf:heartbeat:IPaddr2 params ip=172.25.38.100 cidr_netmask=24 op monitor interval=1min 重新添加虚拟IP
crm(live)configure# commit 提交
crm(live)configure# bye
bye
[root@server2 ~]# crm_mon 打开监控
Connection to the CIB terminated
在server1监控查看配置:
[root@server1 corosync]# crm_mon 打开监控
Connection to the CIB terminated
Reconnecting...[root@server1 corosync]#
[root@server1 corosync]# crm_verify -VL 检测语法无误
[root@server1 corosync]# crm_mon
Connection to the CIB terminated
Reconnecting...[root@server1 corosync]# ip addr 查看虚拟IP是否添加
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 52:54:00:cf:1f:ba brd ff:ff:ff:ff:ff:ff
inet 172.25.38.2/24 brd 172.25.38.255 scope global eth0
inet 172.25.38.100/24 brd 172.25.38.255 scope global secondary eth0
inet6 fe80::5054:ff:fecf:1fba/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 52:54:00:3e:17:9d brd ff:ff:ff:ff:ff:ff
[root@server1 corosync]# /etc/init.d/corosync stop 关闭服务server1在监控可以看到server1已经OFFLINE
Signaling Corosync Cluster Engine (corosync) to terminate: [ OK ]
Waiting for corosync services to unload:. [ OK ]
[root@server1 corosync]# /etc/init.d/corosync start 重新打开重新ONLINE
Starting Corosync Cluster Engine (corosync): [ OK ]
[root@server1 corosync]# crm
crm(live)# configure
crm(live)configure# show
node server1
node server2
primitive vip ocf:heartbeat:IPaddr2 \
params ip="172.25.38.100" cidr_netmask="24" \
op monitor interval="1min"
property $id="cib-bootstrap-options" \
dc-version="1.1.10-14.el6-368c726" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false"
crm(live)configure# property no-quorum-policy=ignore 配置策略
crm(live)configure# commit 提交
crm(live)configure# bye
bye
[root@server1 corosync]# /etc/init.d/corosync stop 关闭corosync检测心跳的功能
Signaling Corosync Cluster Engine (corosync) to terminate: [ OK ]
Waiting for corosync services to unload:. [ OK ]
[root@server1 corosync]# /etc/init.d/corosync start 重新打开服务
Starting Corosync Cluster Engine (corosync): [ OK ]
[root@server1 corosync]# crm
crm(live)# configure
crm(live)configure# bye
bye
[root@server1 corosync]# ps
PID TTY TIME CMD
7492 pts/1 00:00:00 bash
8183 pts/1 00:00:00 ps
[root@server1 corosync]# cd /etc/haproxy/
[root@server1 haproxy]# ls
haproxy.cfg
[root@server1 haproxy]# cd
[root@server1 ~]# ls
asciidoc-8.4.5-4.1.el6.noarch.rpm libnfnetlink-devel-1.0.0-1.el6.x86_64.rpm
crmsh-1.2.6-0.rc2.2.1.x86_64.rpm lvs-fullnat-synproxy
haproxy-1.6.11 Lvs-fullnat-synproxy.tar.gz
haproxy-1.6.11.tar.gz newt-devel-0.52.11-3.el6.x86_64.rpm
keepalived-2.0.6 pssh-2.3.1-2.1.x86_64.rpm
keepalived-2.0.6.tar.gz rpmbuild
kernel-2.6.32-220.23.1.el6.src.rpm slang-devel-2.2.1-1.el6.x86_64.rpm
ldirectord-3.9.5-3.1.x86_64.rpm
[root@server1 ~]# cd rpmbuild/
[root@server1 rpmbuild]# ls
BUILD BUILDROOT RPMS SOURCES SPECS SRPMS
[root@server1 rpmbuild]# cd RPMS/
[root@server1 RPMS]# ls
x86_64
[root@server1 RPMS]# cd x86_64/
[root@server1 x86_64]# ls
haproxy-1.6.11-1.x86_64.rpm haproxy-debuginfo-1.6.11-1.x86_64.rpm
[root@server1 x86_64]# scp haproxy-1.6.11-1.x86_64.rpm server2: 在另外一个节点安装haproxy实现HA
root@server2's password:
haproxy-1.6.11-1.x86_64.rpm 100% 695KB 695.0KB/s 00:00
[root@server1 x86_64]# cd /etc/haproxy/
[root@server1 haproxy]# ls
haproxy.cfg
[root@server1 haproxy]# scp haproxy.cfg server2:/etc/haproxy/ 将更改好的配置文件传递过去
root@server2's password:
haproxy.cfg 100% 1906 1.9KB/s 00:00
[root@server1 haproxy]# /etc/init.d/haproxy restart 打开服务
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
[root@server1 haproxy]# crm
crm(live)# configure
crm(live)configure# show
node server1
node server2
primitive vip ocf:heartbeat:IPaddr2 \
params ip="172.25.38.100" cidr_netmask="24" \
op monitor interval="1min"
property $id="cib-bootstrap-options" \
dc-version="1.1.10-14.el6-368c726" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false" \
no-quorum-policy="ignore"
crm(live)configure# primitive haproxy lsb:haproxy op monitor interval=1min
crm(live)configure# group hagroup vip haproxy添加组防止同样的服务在不同的节点
crm(live)configure# commit 提交策略
crm(live)configure#
在server2进行haproxy的配置:
[root@server2 ~]# ls
anaconda-ks.cfg haproxy-1.6.11-1.x86_64.rpm install.log.syslog
crmsh-1.2.6-0.rc2.2.1.x86_64.rpm install.log pssh-2.3.1-2.1.x86_64.rpm
[root@server2 ~]# rpm -ivh haproxy-1.6.11-1.x86_64.rpm 安装服务
Preparing... ########################################### [100%]
1:haproxy ########################################### [100%]
[root@server2 haproxy]# /etc/init.d/httpd status
httpd (pid 10261) is running...
[root@server2 haproxy]# /etc/init.d/httpd stop 关闭阿帕其
Stopping httpd: [ OK ]
[root@server2 haproxy]# /etc/init.d/haproxy restart 端口会冲突不然服务无法启动会报错
Shutting down haproxy: [FAILED]
Starting haproxy: [ OK ]
[root@server2 haproxy]# /etc/init.d/haproxy restart
Shutting down haproxy: [ OK ]
Starting haproxy: [ OK ]
[root@server2 haproxy]# crm_mon 在server1提交组之后
[root@server1 haproxy]# crm node standby 将节点1挂掉
[root@server1 haproxy]# crm node online 重新打开节点1
先了解什么是fence：
每个节点之间互相发送探测包进行判断节点的存活性。一般会有专门的线路进行探测，这条线路称为“心跳线”
（上图直接使用eth0线路作为心跳线）。假设node1的心跳线出问题，则node2和node3会认为node1出问题，
然后就会把资源调度在node2或者node3上运行，但node1会认为自己没问题不让node2或者node3抢占资源，
此时就出现了脑裂(split brain)。
此时如果在整个环境里有一种设备直接把node1断电，则可以避免脑裂的发生，这种设备叫做fence或者stonith
(Shoot The Other Node In The Head爆头哥)。
在真机查看fence的状态保证开启：
[root@foundation38 kiosk]# systemctl start fence_virtd.service 打开服务
[root@foundation38 kiosk]# systemctl status fence_virtd.service 查看状态为运行
● fence_virtd.service - Fence-Virt system host daemon
Loaded: loaded (/usr/lib/systemd/system/fence_virtd.service; disabled; vendor preset: disabled)
Active: active (running) since Sat 2018-08-04 17:10:22 CST; 1s ago
Process: 19068 ExecStart=/usr/sbin/fence_virtd $FENCE_VIRTD_ARGS (code=exited, status=0/SUCCESS)
Main PID: 19073 (fence_virtd)
CGroup: /system.slice/fence_virtd.service
└─19073 /usr/sbin/fence_virtd -w
Aug 04 17:10:21 foundation38.ilt.example.com systemd[1]: Starting Fence-Virt system host....
Aug 04 17:10:22 foundation38.ilt.example.com fence_virtd[19073]: fence_virtd starting. L...
Aug 04 17:10:22 foundation38.ilt.example.com systemd[1]: Started Fence-Virt system host ....
Hint: Some lines were ellipsized, use -l to show in full.
在真机查看虚拟机的映射关系：
[root@foundation38 kiosk]# virsh list
Id Name State
----------------------------------------------------
1 test1 running
2 test4 running
3 test2 running
4 test3 running
在server1查看fence的配置：
[root@server1 haproxy]# cd /etc/cluster/
[root@server1 cluster]# ls 已经有key文件，没有的化从真机传过来
cman-notify.d fence_xvm.key
[root@server1 cluster]# ll fence_xvm.key
-rw-r--r-- 1 root root 128 Aug 2 14:02 fence_xvm.key
[root@server1 cluster]# crm_mon 打开监控
Connection to the CIB terminated
Reconnecting...[root@server1 cluster]#
在server2查看fence的配置：
[root@server2 haproxy]# cd /etc/cluster/
[root@server2 cluster]# ls 已经有key文件，没有的化从真机传过来
cman-notify.d fence_xvm.key
[root@server2 cluster]# ll fence_xvm.key
-rw-r--r-- 1 root root 128 Aug 2 14:03 fence_xvm.key
[root@server2 cluster]# crm
crm(live)# configure
crm(live)configure# show
node server1 \
attributes standby="off"
node server2
primitive haproxy lsb:haproxy \
op monitor interval="1min"
primitive vip ocf:heartbeat:IPaddr2 \
params ip="172.25.38.100" cidr_netmask="24" \
op monitor interval="1min"
primitive vmfence stonith:fence_xvm \
params pcmk_host_map="test1:server1;test4:server4" \
op monitor interval="1min"
group hagroup vip haproxy
property $id="cib-bootstrap-options" \
dc-version="1.1.10-14.el6-368c726" \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes="2" \
stonith-enabled="false" \
no-quorum-policy="ignore"
crm(live)configure# property stonith-enabled=true 打开fence
crm(live)configure# cd ..
crm(live)# resource
crm(live)resource#
? exit migrate reprobe stop up
bye failcount move restart trace utilization
cd help param secret unmanage
cleanup list promote show unmigrate
demote manage quit start unmove
end meta refresh status untrace
crm(live)resource# stop vmfence 关闭fence
crm(live)resource# cd ..
crm(live)# configure
crm(live)configure#
? erase ms rsc_template
bye exit node rsc_ticket
cd fencing_topology op_defaults rsctest
cib filter order save
cibstatus graph primitive schema
clone group property show
collocation help ptest simulate
colocation history quit template
commit load ra up
default-timeouts location refresh upgrade
delete master rename user
edit modgroup role verify
end monitor rsc_defaults xml
crm(live)configure# edit vmfence 修改fence的映射为server1:test1
crm(live)configure# commit 提交策略
在server1摧毁内核，就是当前服务的节点：
[root@server2 haproxy]# echo c > /proc/sysrq-trigger 摧毁内核根据fence的机制，server1会断电重启
在server2查看监控状态server2已经全面接手服务：
