首页 > 系统相关 >ubuntu20.04部署keepalived

ubuntu20.04部署keepalived

时间：2022-10-24 11:37:58浏览次数：46  
标签：ubuntu20.04 node 01 部署 09 keepalived 192.168 12

一 环境准备

1.1 设置时间同步

root@node-01:~# apt -y install chrony
root@node-01:~# systemctl enable chrony

二 在线安装

2.1 查看keepalived软件版本

root@node-01:~# apt-cache madison keepalived
keepalived | 1:2.0.19-2 | http://mirrors.aliyun.com/ubuntu focal/main amd64 Packages

2.2 安装keepalived

root@node-01:~# apt -y install keepalived

2.3 准备keepalived.conf文件

root@node-01:~# cp /usr/share/doc/keepalived/samples/keepalived.conf.sample /etc/keepalived/keepalived.conf

2.4 修改keepalived.conf文件

点击查看代码

root@node-01:~# sed -i 's@interface eth0@interface ens33@g' /etc/keepalived/keepalived.conf

2.5 启动keepalived服务

点击查看代码

root@node-01:~# systemctl start keepalived
root@node-01:~# systemctl status keepalived
● keepalived.service - Keepalive Daemon (LVS and VRRP)
     Loaded: loaded (/lib/systemd/system/keepalived.service; enabled; vendor preset: enabled)
     Active: active (running) since Tue 2021-11-09 12:05:12 CST; 3s ago
   Main PID: 2182 (keepalived)
      Tasks: 3 (limit: 2245)
     Memory: 2.3M
     CGroup: /system.slice/keepalived.service
             ├─2182 /usr/sbin/keepalived --dont-fork
             ├─2194 /usr/sbin/keepalived --dont-fork
             └─2195 /usr/sbin/keepalived --dont-fork
Nov 09 12:05:12 keepalived-01 Keepalived[2182]: Starting VRRP child process, pid=2195

Nov 09 12:05:12 keepalived-01 Keepalived_healthcheckers[2194]: Initializing ipvs

Nov 09 12:05:12 keepalived-01 Keepalived_healthcheckers[2194]: Gained quorum 1+0=1 <= 1 for VS [10.10.10.2]:tcp:1358

Nov 09 12:05:12 keepalived-01 Keepalived_healthcheckers[2194]: Activating healthchecker for service [192.168.200.2]:tcp:1358 for VS [10.10.10.2]:tcp:1358

Nov 09 12:05:12 keepalived-01 Keepalived_healthcheckers[2194]: Activating BFD healthchecker

Nov 09 12:05:12 keepalived-01 Keepalived_vrrp[2195]: Registering Kernel netlink reflector

Nov 09 12:05:12 keepalived-01 Keepalived_vrrp[2195]: Registering Kernel netlink command channel

Nov 09 12:05:12 keepalived-01 Keepalived_vrrp[2195]: Opening file '/etc/keepalived/keepalived.conf'.

Nov 09 12:05:12 keepalived-01 Keepalived_vrrp[2195]: Registering gratuitous ARP shared channel

Nov 09 12:05:12 keepalived-01 Keepalived_vrrp[2195]: (VI_1) Entering BACKUP STATE (init)

2.6 验证VIP

点击查看代码

root@node-01:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:50:56:2e:5a:9c brd ff:ff:ff:ff:ff:ff
    inet 192.168.174.120/24 brd 192.168.174.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet 192.168.200.11/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet 192.168.200.12/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet 192.168.200.13/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::250:56ff:fe2e:5a9c/64 scope link 
       valid_lft forever preferred_lft forever

三 编译安装keepalived

3.1 安装依赖

root@node-01:~# apt -y install gcc openssl libssl-dev make libnl-3-dev

3.2 下载keepalived安装包

root@keepalived-01:/opt# wget https://keepalived.org/software/keepalived-2.2.4.tar.gz

3.3 安装keepalived

root@node-01:/opt# tar xf keepalived-2.2.4.tar.gz 
root@node-01:/opt# cd keepalived-2.2.4/
root@node-01:/opt/keepalived-2.2.4# ./configure --prefix=/usr/local/keepalived
root@node-01:/opt/keepalived-2.2.4# make && make install

3.4 准备keepalived.conf文件

点击查看代码

root@node-01:~# mkdir -pv /etc/keepalived
mkdir: created directory '/etc/keepalived'
root@node-01:~# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
root@node-01:~# sed -i 's@interface eth0@interface ens33@g' /etc/keepalived/keepalived.conf

3.4 准备keepalived.service文件

root@node-01:~# cat /lib/systemd/system/keepalived.service 
[Unit]
Description=Keepalive Daemon (LVS and VRRP)
After=network-online.target
Wants=network-online.target
[Service]

Type=forking

PIDFile=/run/keepalived.pid

killmode=process

EnvironmentFile=-/usr/local/keepalived/etc/sysconfig/keepalived

ExecStart=/usr/local/keepalived/sbin/keepalived $KEEPALIVED_OPTIONS

ExecReload=/bin/kill -HUP $MAINPID
[Install]

WantedBy=multi-user.target

3.5 开机启动keepalived

root@node-01:~# systemctl enable keepalived
Created symlink /etc/systemd/system/multi-user.target.wants/keepalived.service → /lib/systemd/system/keepalived.service.

3.6 启动keepalived

点击查看代码

root@node-01:~# systemctl start keepalived
root@node-01:~# systemctl status keepalived
● keepalived.service - Keepalive Daemon (LVS and VRRP)
     Loaded: loaded (/lib/systemd/system/keepalived.service; enabled; vendor preset: enabled)
     Active: active (running) since Tue 2021-11-09 13:50:48 CST; 2s ago
    Process: 66737 ExecStart=/usr/local/keepalived/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/SUCCESS)
   Main PID: 66753 (keepalived)
      Tasks: 3 (limit: 2245)
     Memory: 1.7M
     CGroup: /system.slice/keepalived.service
             ├─66753 /usr/local/keepalived/sbin/keepalived -D
             ├─66754 /usr/local/keepalived/sbin/keepalived -D
             └─66755 /usr/local/keepalived/sbin/keepalived -D
Nov 09 13:50:48 node-01 Keepalived_healthcheckers[66754]: Gained quorum 1+0=1 <= 2 for VS [10.10.10.2]:tcp:1358

Nov 09 13:50:48 node-01 Keepalived_healthcheckers[66754]: Gained quorum 1+0=1 <= 2 for VS [10.10.10.3]:tcp:1358

Nov 09 13:50:48 node-01 Keepalived_healthcheckers[66754]: Activating healthchecker for service [192.168.201.100]:tcp:443 for VS [192.168.200.100]:tcp:443

Nov 09 13:50:48 node-01 Keepalived_healthcheckers[66754]: Activating healthchecker for service [192.168.200.2]:tcp:1358 for VS [10.10.10.2]:tcp:1358

Nov 09 13:50:48 node-01 Keepalived_healthcheckers[66754]: Activating healthchecker for service [192.168.200.3]:tcp:1358 for VS [10.10.10.2]:tcp:1358

Nov 09 13:50:48 node-01 Keepalived_healthcheckers[66754]: Activating healthchecker for service [192.168.200.4]:tcp:1358 for VS [10.10.10.3]:tcp:1358

Nov 09 13:50:48 node-01 Keepalived_healthcheckers[66754]: Activating healthchecker for service [192.168.200.5]:tcp:1358 for VS [10.10.10.3]:tcp:1358

Nov 09 13:50:48 node-01 Keepalived_vrrp[66755]: (VI_1) Entering BACKUP STATE (init)

Nov 09 13:50:48 node-01 Keepalived_vrrp[66755]: VRRP sockpool: [ifindex(  2), family(IPv4), proto(112), fd(13,14)]

Nov 09 13:50:48 node-01 systemd[1]: Started Keepalive Daemon (LVS and VRRP).

3.7 验证vip

root@node-01:~# hostname -I
192.168.174.120 192.168.200.16 192.168.200.17 192.168.200.18

3.8 测试vip连通性

root@node-01:~# ping -c 2 192.168.200.18
PING 192.168.200.18 (192.168.200.18) 56(84) bytes of data.
64 bytes from 192.168.200.18: icmp_seq=1 ttl=64 time=0.016 ms
64 bytes from 192.168.200.18: icmp_seq=2 ttl=64 time=0.045 ms
--- 192.168.200.18 ping statistics ---

2 packets transmitted, 2 received, 0% packet loss, time 1014ms

rtt min/avg/max/mdev = 0.016/0.030/0.045/0.014 ms

四 keepalived.conf文件解析

4.1 实现独立配置文件

root@node-01:~# tail -n1 /etc/keepalived/keepalived.conf 
include /etc/keepalived/conf.d/*.conf

4.2 keepalived.conf文件详解

点击查看代码

root@node-01:~# cat /etc/keepalived/keepalived.conf 
! Configuration File for keepalived
global_defs {

notification_email {   #keepalived发生故障切换时邮件发送的目标邮箱

[email protected]

[email protected]

[email protected]

}

notification_email_from [email protected]   #发送邮件的地址

smtp_server 192.168.200.1 #邮件服务器地址

smtp_connect_timeout 30   #邮件服务器连接timeout

router_id LVS_DEVEL       #每个keepalived主机唯一标识，建议使用当前主机名称

vrrp_skip_check_adv_addr  #对所有通告报文都检查，会比较消耗性能，启动此配置后，如果收到的通告报文和上一个报文是同一个路由器，则跳过检查，默认值为全检查

vrrp_strict  #严格遵守VRRP协议，禁止以下情况：1.无VIP地址；2.配置了单播；3.在VRRP版本2中有IPV6地址，开启此项会自动开启iptalbes防火墙规则，建议关闭此项配置

vrrp_garp_interval 0 #gratuitous ARP message报文发送延迟，0标识不延迟

vrrp_gna_interval 0 #unsolicited NA message 消息发送延迟

}vrrp_instance VI_1 {

state MASTER   # 当前节点在虚拟路由上的初始状态，状态为MASTER或者BACKUP

interface ens33   #修改此行，默认为eth0 绑定为当前虚拟路由器使用的物理接口

virtual_router_id 51 #每个虚拟路由器唯一标识，范围0-255.每个虚拟路由器必须唯一，同属一个虚拟路由器的多个keepalived节点必须相同

priority 100 #当前物理节点在此虚拟路由器的优先级，范围1-254，每个keepalived节点此值不同

advert_int 1 #vrrp通告的时间间隔，默认1s

authentication { #认证机制

auth_type PASS #预共享秘钥，仅前8位有效，同一个虚拟路由器的多个keepalived节点必须一样

auth_pass 1111

}

virtual_ipaddress { #虚拟IP

192.168.200.16       #指定VIP，不指定网卡，默认为eth0，默认掩码32

192.168.200.17/24 dev eth1 #指定VIP网卡

192.168.200.18/24 dev ens33 label ens33:1 # 指定VIP网卡label

}

}virtual_server 192.168.200.100 443 {  #虚拟服务器，VIP和PORT

delay_loop 6  #检查后端服务器的时间间隔

lb_algo rr    # 定义调度方法 rr|wrr|lc|wlc|lblc|sh|dh

lb_kind NAT   #集群的类型， NAT|DR|TUN

persistence_timeout 50 #持久连接时长

protocol TCP #指定服务协议，TCP|UDP|SCTPreal_server 192.168.201.100 443 {  #RS的IP和PORT
    weight 1  #RS的权重
    SSL_GET {    #应用层检测 HTTP_GET|SSL_GET
        url {
          path /   #定义要监控的URL
          digest ff20ad2481f97b1754ef3e12ecd3a9cc
        }
        url {
          path /mrtg/
          digest 9b3a0c85a887a256d6939da88aabd8cd
        }
        connect_timeout 3  #客户端请求的超时时长
        retry 3  #重试次数
        delay_before_retry 3 #重试之前的延迟时长
    }
}
}virtual_server 10.10.10.2 1358 {

delay_loop 6

lb_algo rr

lb_kind NAT

persistence_timeout 50

protocol TCPsorry_server 192.168.200.200 1358

real_server 192.168.200.2 1358 {
    weight 1
    HTTP_GET {
        url {
          path /testurl/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334d
        }
        url {
          path /testurl2/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334d
        }
        url {
          path /testurl3/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334d
        }
        connect_timeout 3
        retry 3
        delay_before_retry 3
    }
}

real_server 192.168.200.3 1358 {
    weight 1
    HTTP_GET {
        url {
          path /testurl/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334c
        }
        url {
          path /testurl2/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334c
        }
        connect_timeout 3
        retry 3
        delay_before_retry 3
    }
}
}virtual_server 10.10.10.3 1358 {

delay_loop 3

lb_algo rr

lb_kind NAT

persistence_timeout 50

protocol TCPreal_server 192.168.200.4 1358 {
    weight 1
    HTTP_GET {
        url {
          path /testurl/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334d
        }
        url {
          path /testurl2/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334d
        }
        url {
          path /testurl3/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334d
        }
        connect_timeout 3
        retry 3
        delay_before_retry 3
    }
}

real_server 192.168.200.5 1358 {
    weight 1
    HTTP_GET {
        url {
          path /testurl/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334d
        }
        url {
          path /testurl2/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334d
        }
        url {
          path /testurl3/test.jsp
          digest 640205b7b0fc66c1ea91c463fac6334d
        }
        connect_timeout 3
        retry 3
        delay_before_retry 3
    }
}
}



标签：ubuntu20.04,node,01,部署,09,keepalived,192.168,12
From： https://blog.51cto.com/u_4028786/5789214

相关文章

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99