- Jdk与Elastic版本对应关系：https://www.elastic.co/cn/support/matrix#matrix_jvm
- 下载地址：
Elasticsearch：https://www.elastic.co/cn/downloads/elasticsearch
Logstash：https://www.elastic.co/cn/downloads/logstash
Kibana：https://www.elastic.co/cn/downloads/kibana
Filebeat：https://www.elastic.co/cn/downloads/beats/filebeat
注意，安装时这4个版本需要统一，我下载的是7.17.13版本
使用nssm将elasticsearch、kibana注册成Windows服务
官网：https://www.nssm.cc/download
- 安装步骤
2、Kibana安装
kibana配置文件设置D:\ELK\kibana-7.17.13-windows-x86_64\config\kibana.yml
使用nssm将Kibana注册成服务，
将下载后的nssm.exe文件复制到Kibana的bin目录，在当前目录输入cmd,执行命令，选择path后，单击install service
nssm install kibana.bat
查看 elasticsearch http://127.0.0.1:9200
查看 Kibana http://127.0.0.1:5601
3、Logstash启动
在D:\ELK\logstash-7.17.13\config中新建logstash-local.conf
#input是日志文件的来源处，可以从log文件中读取，也可以从后台端口服务中启用
#这边配置的是从beats（filebeats）中上传读取的，
input {
beats {
port => 5044
}
}
#filter是过滤器，可以用来匹配日志，利用自定义字段区分判断日志归属
#output主要是日志的输出，基本上都是发送到elasticsearch
output {
elasticsearch {
hosts => ["http://localhost:9200"]
index => "%{[fields][service_name]}-%{+YYYY.MM.dd}"
}
stdout { codec => rubydebug }
}
在bin目录执行命令：
logstash.bat -f D:\ELK\logstash-7.17.13\config\logstash-local.conf
4、beats（filebeat）配置启动文件，配置多log文件监控
###################### Filebeat Configuration Example #########################
# This file is an example configuration file highlighting only the most common
# options. The filebeat.reference.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html
# For more available modules and options, please see the filebeat.reference.yml sample
# configuration file.
# ============================== Filebeat inputs ===============================
filebeat.config.inputs:
enabled: true
path: configs/*.yml
reload.enabled: true
reload.period: 10s
filebeat.inputs:
# Each - is an input. Most options can be set at the input level, so
# you can use different inputs for various configurations.
# Below are the input specific configurations.
# filestream is an input for collecting log messages from files.
- type: log
# Unique ID among all inputs, an ID is required.
#id: my-filestream-task
# Change to true to enable this input configuration.
enabled: true
#fields_under_root: true
#recursive_glob.enabled: true
# Paths that should be crawled and fetched. Glob based paths.
paths:
- C:\app\order\log\*.log # /var/log/*.log
#- c:\programdata\elasticsearch\logs\*
#tags: ["dlabs-task-log"]
encoding: utf-8 #支持中文,如不起作用,换 GB2312
#harvester_buffer_size: 600000
#max_bytes: 10485760
fields:
service_name: order-service
- type: log
# Unique ID among all inputs, an ID is required.
#id: my-filestream-task
# Change to true to enable this input configuration.
enabled: true
#fields_under_root: true
#recursive_glob.enabled: true
# Paths that should be crawled and fetched. Glob based paths.
paths:
- C:\app\user\log\*.log # /var/log/*.log
#- c:\programdata\elasticsearch\logs\*
#tags: ["dlabs-task-log"]
encoding: utf-8
#harvester_buffer_size: 600000
#max_bytes: 10485760
fields:
service_name: user-service
# Exclude lines. A list of regular expressions to match. It drops the lines that are
# matching any regular expression from the list.
#exclude_lines: ['^DBG']
# Include lines. A list of regular expressions to match. It exports the lines that are
# matching any regular expression from the list.
#include_lines: ['^ERR', '^WARN']
# Exclude files. A list of regular expressions to match. Filebeat drops the files that
# are matching any regular expression from the list. By default, no files are dropped.
#prospector.scanner.exclude_files: ['.gz$']
# Optional additional fields. These fields can be freely picked
# to add additional information to the crawled log files for filtering
#fields:
# mytype: task
# level: debug
# review: 1
# ============================== Filebeat modules ==============================
filebeat.config.modules:
# Glob pattern for configuration loading
path: ${path.config}/modules.d/*.yml
# Set to true to enable config reloading
reload.enabled: false
# Period on which files under path should be checked for changes
#reload.period: 10s
# ======================= Elasticsearch template setting =======================
setup.template.settings:
index.number_of_shards: 1
#index.codec: best_compression
#_source.enabled: false
# ================================== General ===================================
# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
#name:
# The tags of the shipper are included in their own field with each
# transaction published.
#tags: ["service-X", "web-tier"]
# Optional fields that you can specify to add additional information to the
# output.
#fields:
# env: staging
# ================================= Dashboards =================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards is disabled by default and can be enabled either by setting the
# options here or by using the `setup` command.
#setup.dashboards.enabled: false
# The URL from where to download the dashboards archive. By default this URL
# has a value which is computed based on the Beat name and version. For released
# versions, this URL points to the dashboard archive on the artifacts.elastic.co
# website.
#setup.dashboards.url:
# =================================== Kibana ===================================
# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:
# Kibana Host
# Scheme and port can be left out and will be set to the default (http and 5601)
# In case you specify and additional path, the scheme is required: http://localhost:5601/path
# IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
#host: "localhost:5601"
# Kibana Space ID
# ID of the Kibana Space into which the dashboards should be loaded. By default,
# the Default Space will be used.
#space.id:
# =============================== Elastic Cloud ================================
# These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).
# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:
# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:
# ================================== Outputs ===================================
# Configure what output to use when sending the data collected by the beat.
# ---------------------------- Elasticsearch Output ----------------------------
#output.elasticsearch:
# Array of hosts to connect to.
#hosts: ["localhost:9200"]
# Protocol - either `http` (default) or `https`.
#protocol: "https"
# Authentication credentials - either API key or username/password.
#api_key: "id:api_key"
#username: "elastic"
#password: "123456"
# ------------------------------ Logstash Output -------------------------------
output.logstash:
# The Logstash hosts
enable: true
hosts: ["localhost:5044"]
# Optional SSL. By default is off.
# List of root certificates for HTTPS server verifications
#ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
# Certificate for SSL client authentication
#ssl.certificate: "/etc/pki/client/cert.pem"
# Client Certificate Key
#ssl.key: "/etc/pki/client/cert.key"
# ================================= Processors =================================
processors:
- add_host_metadata:
when.not.contains.tags: forwarded
- add_cloud_metadata: ~
- add_docker_metadata: ~
- add_kubernetes_metadata: ~
# ================================== Logging ===================================
# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: debug
# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publisher", "service".
#logging.selectors: ["*"]
# ============================= X-Pack Monitoring ==============================
# Filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster. This requires xpack monitoring to be enabled in Elasticsearch. The
# reporting is disabled by default.
# Set to true to enable the monitoring reporter.
#monitoring.enabled: false
# Sets the UUID of the Elasticsearch cluster under which monitoring data for this
# Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch
# is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.
#monitoring.cluster_uuid:
# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well.
# Note that the settings should point to your Elasticsearch *monitoring* cluster.
# Any setting that is not set is automatically inherited from the Elasticsearch
# output configuration, so if you have the Elasticsearch output configured such
# that it is pointing to your Elasticsearch monitoring cluster, you can simply
# uncomment the following line.
#monitoring.elasticsearch:
# ============================== Instrumentation ===============================
# Instrumentation support for the filebeat.
#instrumentation:
# Set to true to enable instrumentation of filebeat.
#enabled: false
# Environment in which filebeat is running on (eg: staging, production, etc.)
#environment: ""
# APM Server hosts to report instrumentation results to.
#hosts:
# - http://localhost:8200
# API Key for the APM Server(s).
# If api_key is set then secret_token will be ignored.
#api_key:
# Secret token for the APM Server(s).
#secret_token:
# ================================= Migration ==================================
# This allows to enable 6.7 migration aliases
#migration.6_to_7.enabled: true
View Code
以服务方式启动
sc create Elastic.filebeat binpath= "C:\\ELK\filebeat-7.17.13-windows-x86_64\\filebeat.exe -c C:\\ELK\filebeat-7.17.13-windows-x86_64\\filebeat.yml -e" start= auto
注意：要先启动logstash，再启动filebeat，不然会报端口错误
创建索引
参考：https://blog.csdn.net/qq_43991936/article/details/128559302
标签：ELK,filebeat,log,Windows,enabled,elasticsearch,output,true From： https://www.cnblogs.com/personblog/p/17760658.html