首页 > 数据库 >Redisson分布式锁和同步器详解-官方原版

Redisson分布式锁和同步器详解-官方原版

时间：2023-06-18 18:31:41浏览次数：52  
标签：10 Redisson semaphore 同步器 lock acquire seconds 原版 SECONDS

一、锁定

基于Redis的Java分布式可重入锁对象，并实现了锁接口。

如果获取锁的Redisson实例崩溃，则此类锁可能会在获取状态下永久挂起。为了避免这种Redisson维护锁watchdog，当锁持有者Redisson实例处于活动状态时，它会延长锁的到期时间。默认情况下，lock watchdog超时为30秒，可以通过Config.lockWatchdogTimeout设置进行更改。

可以定义锁获取期间的leaseTime参数。在指定的时间间隔后，锁定的锁将自动释放。

RLock对象的行为符合Java Lock规范。这意味着只有锁所有者线程才能解锁它，否则将引发IllegalMonitorStateException。否则，请考虑使用RSemaphore对象。

代码示例：

RLock lock = redisson.getLock("myLock");

// traditional lock method
lock.lock();

// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       lock.unlock();
   }
}

异步接口用法的代码示例：

RLock lock = redisson.getLock("myLock");

RFuture<Void> lockFuture = lock.lockAsync();

// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);

lockFuture.whenComplete((res, exception) -> {

    // ...

    lock.unlockAsync();
});

反应式接口用法的代码示例：

RedissonReactiveClient redisson = redissonClient.reactive();
RLockReactive lock = redisson.getLock("myLock");

Mono<Void> lockMono = lock.lock();

// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);

lockMono.doOnNext(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient redisson = redissonClient.rxJava();
RLockRx lock = redisson.getLock("myLock");

Completable lockRes = lock.lock();

// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);

lockRes.doOnSuccess(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

二、公平锁定

基于Redis的分布式可重入公平Java锁对象实现了锁接口。

公平锁保证线程将按照请求的顺序获取它。所有等待的线程都将排队，如果某个线程已死亡，Redisson将等待其返回5秒。例如，如果5个线程由于某种原因而死亡，那么延迟将为25秒。

如果获取锁的Redisson实例崩溃，则此类锁可能会在获取状态下永久挂起。为了避免这种Redisson维护锁看门狗，当锁持有者Redisson实例处于活动状态时，它会延长锁的到期时间。默认情况下，锁看门狗超时为30秒，可以通过Config.lockWatchdogTimeout设置进行更改。

可以定义锁获取期间的leaseTime参数。在指定的时间间隔后，锁定的锁将自动释放。

RLock对象的行为符合Java Lock规范。这意味着只有锁所有者线程才能解锁它，否则将引发IllegalMonitorStateException。否则，请考虑使用RSemaphore对象。

代码示例：

RLock lock = redisson.getFairLock("myLock");

// traditional lock method
lock.lock();

// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       lock.unlock();
   }
}

异步接口用法的代码示例：

RLock lock = redisson.getFairLock("myLock");

RFuture<Void> lockFuture = lock.lockAsync();

// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);

lockFuture.whenComplete((res, exception) -> {
    // ...
    lock.unlockAsync();
});

Reactive接口 用法的代码示例:

RedissonReactiveClient redisson = redissonClient.reactive();
RLockReactive lock = redisson.getFairLock("myLock");

Mono<Void> lockMono = lock.lock();

// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);

lockMono.doOnNext(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient redisson = redissonClient.rxJava();
RLockRx lock = redisson.getFairLock("myLock");

Completable lockRes = lock.lock();

// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);

lockRes.doOnSuccess(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

三、多重锁

基于Redis的分布式MultiLock对象允许将Lock对象分组，并将其作为单个锁处理。每个RLock对象可能属于不同的Redisson实例。

如果获取MultiLock的Redisson实例崩溃，那么这样的MultiLock可能会永远挂在获取状态。为了避免这种Redisson维护锁watchdog，当锁持有者Redisson实例处于活动状态时，它会延长锁的到期时间。默认情况下，lock watchdog超时为30秒，可以通过Config.lockWatchdogTimeout设置进行更改。

可以定义锁获取期间的leaseTime参数。在指定的时间间隔后，锁定的锁将自动释放。

MultiLock对象的行为符合Java Lock规范。这意味着只有锁所有者线程才能解锁它，否则将引发IllegalMonitorStateException。否则，请考虑使用RSemaphore对象。

代码示例：

RLock lock1 = redisson1.getLock("lock1");
RLock lock2 = redisson2.getLock("lock2");
RLock lock3 = redisson3.getLock("lock3");

RLock multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);

// traditional lock method
multiLock.lock();

// or acquire lock and automatically unlock it after 10 seconds
multiLock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
boolean res = multiLock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       multiLock.unlock();
   }
}

异步接口用法的代码示例：

RLock lock1 = redisson1.getLock("lock1");
RLock lock2 = redisson2.getLock("lock2");
RLock lock3 = redisson3.getLock("lock3");

RLock multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);

RFuture<Void> lockFuture = multiLock.lockAsync();

// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = multiLock.lockAsync(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = multiLock.tryLockAsync(100, 10, TimeUnit.SECONDS);

lockFuture.whenComplete((res, exception) -> {
    // ...
    multiLock.unlockAsync();
});

反应式接口用法的代码示例：

RedissonReactiveClient anyRedisson = redissonClient.reactive();

RLockReactive lock1 = redisson1.getLock("lock1");
RLockReactive lock2 = redisson2.getLock("lock2");
RLockReactive lock3 = redisson3.getLock("lock3");

RLockReactive multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);

Mono<Void> lockMono = multiLock.lock();

// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = multiLock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = multiLock.tryLock(100, 10, TimeUnit.SECONDS);

lockMono.doOnNext(res -> {
   // ...
})
.doFinally(multiLock.unlock())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient anyRedisson = redissonClient.rxJava();

RLockRx lock1 = redisson1.getLock("lock1");
RLockRx lock2 = redisson2.getLock("lock2");
RLockRx lock3 = redisson3.getLock("lock3");

RLockRx multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);

Completable lockRes = multiLock.lock();

// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = multiLock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = multiLock.tryLock(100, 10, TimeUnit.SECONDS);

lockRes.doOnSuccess(res -> {
   // ...
})
.doFinally(multiLock.unlock())
.subscribe();

四、读写锁定

基于Redis的Java分布式可重入读写锁对象实现了读写锁接口。读和写锁都实现RLock接口。

只允许有多个ReadLock所有者和一个WriteLock所有者。

如果获取锁的Redisson实例崩溃，则此类锁可能会在获取状态下永久挂起。为了避免这种Redisson维护锁看门狗，当锁持有者Redisson实例处于活动状态时，它会延长锁的到期时间。默认情况下，锁看门狗超时为30秒，可以通过Config.lockWatchdogTimeout设置进行更改。

此外，Redisson允许在获取锁期间指定leaseTime参数。在指定的时间间隔后，锁定的锁将自动释放。

RLock对象的行为符合Java Lock规范。这意味着只有锁所有者线程才能解锁它，否则将引发IllegalMonitorStateException。否则，请考虑使用RSemaphore对象。

代码示例：

RReadWriteLock rwlock = redisson.getReadWriteLock("myLock");

RLock lock = rwlock.readLock();
// or
RLock lock = rwlock.writeLock();

// traditional lock method
lock.lock();

// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       lock.unlock();
   }
}

异步接口用法的代码示例：

RReadWriteLock rwlock = redisson.getReadWriteLock("myLock");

RLock lock = rwlock.readLock();
// or
RLock lock = rwlock.writeLock();

RFuture<Void> lockFuture = lock.lockAsync();

// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);

lockFuture.whenComplete((res, exception) -> {

    // ...

    lock.unlockAsync();
});

反应式接口用法的代码示例：

RedissonReactiveClient redisson = redissonClient.reactive();

RReadWriteLockReactive rwlock = redisson.getReadWriteLock("myLock");

RLockReactive lock = rwlock.readLock();
// or
RLockReactive lock = rwlock.writeLock();

Mono<Void> lockMono = lock.lock();

// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);

lockMono.doOnNext(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient redisson = redissonClient.rxJava();

RReadWriteLockRx rwlock = redisson.getReadWriteLock("myLock");

RLockRx lock = rwlock.readLock();
// or
RLockRx lock = rwlock.writeLock();

Completable lockRes = lock.lock();

// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);

// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);

lockRes.doOnSuccess(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

五、信号量

基于Redis的分布式Java信号量对象，类似于信号量对象。

可以在使用前初始化，但这不是必需的，通过trySetPermissions（permissions）方法获得可用的许可量。

代码示例：

RSemaphore semaphore = redisson.getSemaphore("mySemaphore");

// acquire single permit
semaphore.acquire();

// or acquire 10 permits
semaphore.acquire(10);

// or try to acquire permit
boolean res = semaphore.tryAcquire();

// or try to acquire permit or wait up to 15 seconds
boolean res = semaphore.tryAcquire(15, TimeUnit.SECONDS);

// or try to acquire 10 permit
boolean res = semaphore.tryAcquire(10);

// or try to acquire 10 permits or wait up to 15 seconds
boolean res = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       semaphore.release();
   }
}

异步接口用法的代码示例：

RSemaphore semaphore = redisson.getSemaphore("mySemaphore");

// acquire single permit
RFuture<Void> acquireFuture = semaphore.acquireAsync();

// or acquire 10 permits
RFuture<Void> acquireFuture = semaphore.acquireAsync(10);

// or try to acquire permit
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync();

// or try to acquire permit or wait up to 15 seconds
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync(15, TimeUnit.SECONDS);

// or try to acquire 10 permit
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync(10);

// or try to acquire 10 permits or wait up to 15 seconds
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync(10, 15, TimeUnit.SECONDS);

acquireFuture.whenComplete((res, exception) -> {
    // ...
    semaphore.releaseAsync();
});

反应式接口用法的代码示例：

RedissonReactiveClient redisson = redissonClient.reactive();

RSemaphoreReactive semaphore = redisson.getSemaphore("mySemaphore");

// acquire single permit
Mono<Void> acquireMono = semaphore.acquire();

// or acquire 10 permits
Mono<Void> acquireMono = semaphore.acquire(10);

// or try to acquire permit
Mono<Boolean> acquireMono = semaphore.tryAcquire();

// or try to acquire permit or wait up to 15 seconds
Mono<Boolean> acquireMono = semaphore.tryAcquire(15, TimeUnit.SECONDS);

// or try to acquire 10 permit
Mono<Boolean> acquireMono = semaphore.tryAcquire(10);

// or try to acquire 10 permits or wait up to 15 seconds
Mono<Boolean> acquireMono = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);

acquireMono.doOnNext(res -> {
   // ...
})
.doFinally(semaphore.release())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient redisson = redissonClient.rxJava();

RSemaphoreRx semaphore = redisson.getSemaphore("mySemaphore");

// acquire single permit
Completable acquireRx = semaphore.acquire();

// or acquire 10 permits
Completable acquireRx = semaphore.acquire(10);

// or try to acquire permit
Single<Boolean> acquireRx = semaphore.tryAcquire();

// or try to acquire permit or wait up to 15 seconds
Single<Boolean> acquireRx = semaphore.tryAcquire(15, TimeUnit.SECONDS);

// or try to acquire 10 permit
Single<Boolean> acquireRx = semaphore.tryAcquire(10);

// or try to acquire 10 permits or wait up to 15 seconds
Single<Boolean> acquireRx = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);

acquireRx.doOnSuccess(res -> {
   // ...
})
.doFinally(semaphore.release())
.subscribe();

六、允许可过期信号量

基于 Redis 的分布式 Java 信号量对象，每个获取的许可证都支持租用时间参数。每个许可证都由自己的身份证标识，只能使用其身份证签发。

应在使用前通过trySetPermissions（permissions）方法使用可用许可量进行初始化。允许通过addPermissions（许可证）方法增加/减少可用许可证的数量。

代码示例：

RPermitExpirableSemaphore semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");

semaphore.trySetPermits(23);

// acquire permit
String id = semaphore.acquire();

// or acquire permit with lease time in 10 seconds
String id = semaphore.acquire(10, TimeUnit.SECONDS);

// or try to acquire permit
String id = semaphore.tryAcquire();

// or try to acquire permit or wait up to 15 seconds
String id = semaphore.tryAcquire(15, TimeUnit.SECONDS);

// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
String id = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
if (id != null) {
   try {
     ...
   } finally {
       semaphore.release(id);
   }
}

异步接口用法的代码示例：

RPermitExpirableSemaphore semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");

RFuture<Boolean> setFuture = semaphore.trySetPermitsAsync(23);

// acquire permit
RFuture<String> acquireFuture = semaphore.acquireAsync();

// or acquire permit with lease time in 10 seconds
RFuture<String> acquireFuture = semaphore.acquireAsync(10, TimeUnit.SECONDS);

// or try to acquire permit
RFuture<String> acquireFuture = semaphore.tryAcquireAsync();

// or try to acquire permit or wait up to 15 seconds
RFuture<String> acquireFuture = semaphore.tryAcquireAsync(15, TimeUnit.SECONDS);

// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
RFuture<String> acquireFuture = semaphore.tryAcquireAsync(10, 15, TimeUnit.SECONDS);
acquireFuture.whenComplete((id, exception) -> {
    // ...
    semaphore.releaseAsync(id);
});

反应式接口用法的代码示例：

RedissonReactiveClient redisson = redissonClient.reactive();

RPermitExpirableSemaphoreReactive semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");

Mono<Boolean> setMono = semaphore.trySetPermits(23);

// acquire permit
Mono<String> acquireMono = semaphore.acquire();

// or acquire permit with lease time in 10 seconds
Mono<String> acquireMono = semaphore.acquire(10, TimeUnit.SECONDS);

// or try to acquire permit
Mono<String> acquireMono = semaphore.tryAcquire();

// or try to acquire permit or wait up to 15 seconds
Mono<String> acquireMono = semaphore.tryAcquire(15, TimeUnit.SECONDS);

// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
Mono<String> acquireMono = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);

acquireMono.flatMap(id -> {
   // ...
   return semaphore.release(id);
}).subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient redisson = redissonClient.rxJava();

RPermitExpirableSemaphoreRx semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");

Single<Boolean> setRx = semaphore.trySetPermits(23);

// acquire permit
Single<String> acquireRx = semaphore.acquire();

// or acquire permit with lease time in 10 seconds
Single<String> acquireRx = semaphore.acquire(10, TimeUnit.SECONDS);

// or try to acquire permit
Maybe<String> acquireRx = semaphore.tryAcquire();

// or try to acquire permit or wait up to 15 seconds
Maybe<String> acquireRx = semaphore.tryAcquire(15, TimeUnit.SECONDS);

// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
Maybe<String> acquireRx = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);

acquireRx.flatMap(id -> {
   // ...
   return semaphore.release(id);
}).subscribe();



文章下方有交流学习区！一起学习进步！也可以前往官网，加入官方微信交流群

创作不易，如果觉得文章不错，可以点赞收藏评论

你的支持和鼓励是我创作的动力❗❗❗

官网：Doker 多克;官方旗舰店：首页-Doker 多克-淘宝网  全品优惠


标签：10,Redisson,semaphore,同步器,lock,acquire,seconds,原版,SECONDS
From： https://blog.51cto.com/Doker/6509214

相关文章

  • Redis之Redisson原理详解
    目录1Redisson1.1简介1.2与其他客户端比较1.3操作使用1.3.1pom.xml1.3.2配置1.3.3启用分布式锁1.4大致操作原理1.5RLock1.5.1RLock如何加锁1.5.2解锁消息1.5.3锁续约1.5.4流程概括1.6公平锁1.6.1java中公平锁1.6.2RedissonFairLock1.6.3公平锁加锁步骤1Redisso......
  • XILINX FPGA全套图纸 (ZYNQ板Altium原理图和PCB) ，10层ZedBoard原版AD工程，十层PCB设
    XILINXFPGA全套图纸(ZYNQ板Altium原理图和PCB)，10层ZedBoard原版AD工程，十层PCB设计，6个信号层，4个电源层，是学习AD高速信号多层板的好素材，已打板验证。特别适合做此类项目的工程师参考，或者新手作为模板参考。里面有详细的叠层管理，布线规则设定，差分规则，尤其是DDR3和千兆网络的布线......
  • 福特汽车主观评价规范，性能开发参考，英文原版直译，评价条目、规则描述非常细致。
    福特汽车主观评价规范，性能开发参考，英文原版直译，评价条目、规则描述非常细致。包含平顺舒适性，转向，操稳，NVH，制动，加速感，驾驶性等等性能，并详细描述了评价的准备工作。评价条目细分至第四级，共650多项，每一项都有详细的评价方法，是整车主观评价非常有价值的参考资料ID:8331641139127157......
  • 使用spring-plugin和redisson实现延迟队列
    目录一、介绍二、步骤三、运行效果四、源码一、介绍本文主要介绍如何使用springplugin和redisson去实现延迟队列二、步骤pom.xml引入依赖包<dependencies><dependency><groupId>org.springframework.boot</groupId><artifactId>sp......
  • redisson-2.10.4源代码分析
       redis学习问题总结http://aperise.iteye.com/blog/2310639ehcachememcachedredis缓存技术总结http://aperise.iteye.com/blog/2296219redis-stat离线安装http://aperise.iteye.com/blog/2310254redis cluster非ruby方式启动http://aperise.iteye.com/blog/2310254re......
  • redisson 分布式锁
    @RequestMapping(value="/testLock",method=RequestMethod.POST)publicBaseResponse<Boolean>testLock(@RequestBodyTestLockRequesttestLockRequest){RLockrLock=null;booleanisLocked=false;try{......
  • 分布式锁-Redisson
    分布式锁1、分布式锁1.1本地锁的局限性1.1.1测试代码1.1.2使用ab工具测试(单节点)1.1.3本地锁问题演示(集群情况)1.2分布式锁实现的解决方案1.3使用Redis实现分布式锁(了解即可)1.3.1编写代码1.3.2压测1.4使用Redisson解决分布式锁1.4.1实现代码1.4.1压测1.4.2可重入......
  • redisson lock的使用
    1.现在错误的用法:RLocklock=redisson.getLock(String.format(LOCK_KEY,2));try{if(lock.tryLock()){//处理logger.info("aaaaaaaaaaaaaaaaaa");}catch(Exceptione){//处理异常}finally{if(lock.isLocked()){lock.unlock();}}测试......
  • EasyBoot教程一：制作WIN7原版多重启动盘方法
    EasyBoot教程一：制作WIN7原版多重启动盘方法1.安装EasyBoot、UltraISO软件2.用UltraISO打开下载好的WIN7原版镜像3.选择启动，保存引导文件4.保存为win7x32.bif，以后会用到5.打开EasyBoot的安装目录C:\ProgramFiles(x86)\EasyBoot\disk1\ezboot，将ISO文件里的所有文件（注意：不包括autoru......
  • 白帽子黑客教你：如何下载Windows原版操作系统？（2种方式）
    方式一：官网下载1.1百度搜索windows10官方下载，并选择第一个官方网站进入。1.2找到立即下载工具/点击下载2.3双击运行下载好的文件2.4选择接受2.5为另一台电脑创建安装介质(U盘、DVD或ISO文件)/下一步2.6下一步2.7ISO文件/下一步2.8选择下载路径并保存2.9下载完成即......

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99