“模拟采点” 只有在这种模式下才可以在数模上采集测量元素， 多用于脱机编程手动在数模上取点。
鼠标采点： 脱机手操器采点， 点击该按钮后， 在模型的面元素上任意位置点击左键即可拾取。 只应用在脱机测量。
$$ NET_DMIS_20160720
$$ MADE IN DE 2023-2-9 12:59:58
INCLUD/DMIS,'NET_DMIS_DEFINES.DMI'
INCLUD/DMIS,'VARDEFINE'
DMESW/COMAND,'PROBE_VAL/INIT'
UNITS/MM,ANGDEC
D(MACHINE)=DATSET/MCS
DMESW/COMAND,'COORDSYS/ALIGN'
WKPLAN/XYPLAN
PRCOMP/ON
PRCOMP/ON
FEDRAT/POSVEL,MMPS,300.0000
ACLRAT/POSACL,MMPSS,100.0000
FEDRAT/MESVEL,MMPS,20.0000
ACLRAT/MESACL,MMPSS,100.0000
SNSET/RETRCT,1.0000
SNSET/SEARCH,5.0000
SNSET/APPRCH,1.0000
DMESW/COMAND,'SNSET/MANRETRCT,1.0000'
DMESW/COMAND,'REPORT/CLEAR'
MODE/MAN
DID(D2L40)=DEVICE/STOR,'D2L40'
OPEN/DID(D2L40),SNS
S(A0B0)=SNSDEF/PROBE,INDEX,POL,0.0,0.0,0.0000,0.0000,1.0000,189.6500,2.0000
SNSLCT/SA(A0B0)
DMESW/COMAND,'SNSET/MANRETRCT,2.0000'
GEOALG/PLANE,LSTSQR
F(平面1)=FEAT/PLANE,CART,22.2558,23.4569,0,0,0,1.00000000
MEAS/PLANE,F(平面1),3
PTMEAS/CART,2.6750,58.8009,0,0,0,1.00000000
PTMEAS/CART,3.3043,7.0519,0,0,0,1.00000000
PTMEAS/CART,60.7882,4.5178,0,0,0,1.00000000
ENDMES
SNSET/DEPTH,0
DMESW/COMAND,'CONST/SET_PROJ_VEC,FA(平面1),1'
F(直线1)=FEAT/LINE,UNBND,CART,4.9240,0,-2.5596,0.99999500,0,0.00316146,0,-1.00000000,0
MEAS/LINE,F(直线1),2
PTMEAS/CART,4.9240,0,-2.4684,0,-1.00000000,0
PTMEAS/CART,62.6713,0,-2.4684,0,-1.00000000,0
ENDMES
F(点1)=FEAT/POINT,CART,0,5.9455,-1.6132,-1.00000000,0,0
MEAS/POINT,COMP,DME,F(点1),1
PTMEAS/CART,0,5.9455,-1.6132,-1.00000000,0,0
ENDMES