基于docker和cri-dockerd部署kubernetes v1.25.3
1、环境准备
1-1、主机清单
| 主机名 | IP地址 | 系统版本 |
|---|---|---|
| k8s-master01 k8s-master01.wang.org kubeapi.wang.org kubeapi | 10.0.0.101 | Ubuntu2004 |
| k8s-master02 k8s-master02.wang.org | 10.0.0.102 | Ubuntu2004 |
| k8s-master03 k8s-master03.wang.org | 10.0.0.103 | Ubuntu2004 |
| k8s-node01 k8s-node01.wang.org | 10.0.0.111 | Ubuntu2004 |
| k8s-node02 k8s-node02.wang.org | 10.0.0.112 | Ubuntu2004 |
| k8s-node03 k8s-node03.wang.org | 10.0.0.113 | Ubuntu2004 |
1-2、软件清单
docker-ce 20.10.21
cri-dockerd 0.2.6
kubeadm 1.25.3
flannel 0.20.11-3、系统基础环境
1-3-1、关闭防火墙
#所有节点执行：
[root@k8s-master01 ~]# ufw disable
[root@k8s-master01 ~]# ufw status1-3-2、时间同步
#所有节点执行：
[root@k8s-master01 ~]# apt install -y chrony
[root@k8s-master01 ~]# systemctl restart chrony
[root@k8s-master01 ~]# systemctl status chrony
[root@k8s-master01 ~]# chronyc sources1-3-3、主机名互相解析
#所有节点执行：
[root@k8s-master01 ~]# vim /etc/hosts
10.0.0.101 k8s-master01 k8s-master01.wang.org kubeapi.wang.org kubeapi
10.0.0.102 k8s-master02 k8s-master02.wang.org
10.0.0.103 k8s-master03 k8s-master03.wang.org
10.0.0.111 k8s-node01 k8s-node01.wang.org
10.0.0.112 k8s-node02 k8s-node02.wang.org
10.0.0.113 k8s-node03 k8s-node03.wang.org
[root@k8s-master01 ~]# cat /etc/hosts 1-3-4、禁用swap
#所有节点执行：
[root@k8s-master01 ~]# sed -r -i '/\/swap/s@^@#@' /etc/fstab
[root@k8s-master01 ~]# swapoff -a
[root@k8s-master01 ~]# systemctl --type swap
#若不禁用Swap设备，需要在后续编辑kubelet的配置文件/etc/default/kubelet，设置其忽略Swap启用的状态错误，内容：KUBELET_EXTRA_ARGS="--fail-swap-on=false"2、安装docker
#所有节点执行：
#安装必要的一些系统工具
[root@k8s-master01 ~]# apt update
[root@k8s-master01 ~]# apt -y install apt-transport-https ca-certificates curl software-properties-common
#安装GPG证书
[root@k8s-master01 ~]# curl -fsSL http://mirrors.aliyun.com/docker-ce/linux/ubuntu/gpg | apt-key add -
OK
#写入软件源信息
[root@k8s-master01 ~]# add-apt-repository "deb [arch=amd64] http://mirrors.aliyun.com/docker-ce/linux/ubuntu $(lsb_release -cs) stable"
#更新并安装Docker-CE
[root@k8s-master01 ~]# apt update
[root@k8s-master01 ~]# apt install -y docker-ce #所有节点执行：
kubelet需要让docker容器引擎使用systemd作为CGroup的驱动，其默认值为cgroupfs，因而，我们还需要编辑docker的配置文件/etc/docker/daemon.json，添加如下内容，其中的registry-mirrors用于指明使用的镜像加速服务。
[root@k8s-master01 ~]# vim /etc/docker/daemon.json
{
"registry-mirrors": [
"https://docker.mirrors.ustc.edu.cn",
"https://hub-mirror.c.163.com",
"https://reg-mirror.qiniu.com",
"https://registry.docker-cn.com"
],
"exec-opts": ["native.cgroupdriver=systemd"],
"log-driver": "json-file",
"log-opts": {
"max-size": "200m"
},
"storage-driver": "overlay2"
}
[root@k8s-master01 ~]# systemctl daemon-reload
[root@k8s-master01 ~]# systemctl start docker
[root@k8s-master01 ~]# systemctl enable docker
[root@k8s-master01 ~]# docker version
Client: Docker Engine - Community
Version: 20.10.21
#注：kubeadm部署Kubernetes集群的过程中，默认使用Google的Registry服务k8s.gcr.io上的镜像,由于2022年仓库已经改为registry.k8s.io，国内可以直接访问，所以现在不需要镜像加速或者绿色上网就可以拉镜像了，如果使用国内镜像请参考https://blog.51cto.com/dayu/58113073、安装cri-dockerd
#所有节点执行：
#下载地址：https://github.com/Mirantis/cri-dockerd
[root@k8s-master01 ~]# apt install ./cri-dockerd_0.2.6.3-0.ubuntu-focal_amd64.deb -y
#完成安装后，相应的服务cri-dockerd.service便会自动启动
[root@k8s-master01 ~]#systemctl status cri-docker.service4、安装kubeadm、kubelet和kubectl
#所有节点执行：
#在各主机上生成kubelet和kubeadm等相关程序包的仓库，可参考阿里云官网
[root@k8s-master01 ~]# apt update
[root@k8s-master01 ~]# apt install -y apt-transport-https curl
[root@k8s-master01 ~]# curl https://mirrors.aliyun.com/kubernetes/apt/doc/apt-key.gpg | apt-key add -
[root@k8s-master01 ~]#cat <<EOF >/etc/apt/sources.list.d/kubernetes.list
> deb https://mirrors.aliyun.com/kubernetes/apt/ kubernetes-xenial main
> EOF
#更新仓库并安装
[root@k8s-master01 ~]# apt update
[root@k8s-master01 ~]# apt install -y kubelet kubeadm kubectl
#注意：先不要启动，只是设置开机自启动
[root@k8s-master01 ~]# systemctl enable kubelet
#确定kubeadm等程序文件的版本
[root@k8s-master01 ~]# kubeadm version
kubeadm version: &version.Info{Major:"1", Minor:"25", GitVersion:"v1.25.3", GitCommit:"434bfd82814af038ad94d62ebe59b133fcb50506", GitTreeState:"clean", BuildDate:"2022-10-12T10:55:36Z", GoVersion:"go1.19.2", Compiler:"gc", Platform:"linux/amd64"}
5、整合kubelet和cri-dockerd
5-1、配置cri-dockerd
#所有节点执行：
[root@k8s-master01 ~]# vim /usr/lib/systemd/system/cri-docker.service
#ExecStart=/usr/bin/cri-dockerd --container-runtime-endpoint fd://
ExecStart=/usr/bin/cri-dockerd --pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.8 --container-runtime-endpoint fd:// --network-plugin=cni --cni-bin-dir=/opt/cni/bin --cni-cache-dir=/var/lib/cni/cache --cni-conf-dir=/etc/cni/net.d
#说明：
需要添加的各配置参数（各参数的值要与系统部署的CNI插件的实际路径相对应）：
--network-plugin：指定网络插件规范的类型，这里要使用CNI；
--cni-bin-dir：指定CNI插件二进制程序文件的搜索目录；
--cni-cache-dir：CNI插件使用的缓存目录；
--cni-conf-dir：CNI插件加载配置文件的目录；
配置完成后，重载并重启cri-docker.service服务。
[root@k8s-master01 ~]# systemctl daemon-reload && systemctl restart cri-docker.service
[root@k8s-master01 ~]# systemctl status cri-docker
5-2、配置kubelet
#所有节点执行：
#配置kubelet，为其指定cri-dockerd在本地打开的Unix Sock文件的路径，该路径一般默认为“/run/cri-dockerd.sock“
[root@k8s-master01 ~]# mkdir /etc/sysconfig
[root@k8s-master01 ~]# vim /etc/sysconfig/kubelet
KUBELET_KUBEADM_ARGS="--container-runtime=remote --container-runtime-endpoint=/run/cri-dockerd.sock"
[root@k8s-master01 ~]# cat /etc/sysconfig/kubelet
KUBELET_KUBEADM_ARGS="--container-runtime=remote --container-runtime-endpoint=/run/cri-dockerd.sock"
#说明：该配置也可不进行，而是直接在后面的各kubeadm命令上使用“--cri-socket unix:///run/cri-dockerd.sock”选项6、初始化第一个主节点
#第一个主节点执行：
#列出k8s所需要的镜像
[root@k8s-master01 ~]# kubeadm config images list
registry.k8s.io/kube-apiserver:v1.25.3
registry.k8s.io/kube-controller-manager:v1.25.3
registry.k8s.io/kube-scheduler:v1.25.3
registry.k8s.io/kube-proxy:v1.25.3
registry.k8s.io/pause:3.8
registry.k8s.io/etcd:3.5.4-0
registry.k8s.io/coredns/coredns:v1.9.3
#使用阿里云拉取所需镜像
[root@k8s-master01 ~]# kubeadm config images pull --image-repository=registry.aliyuncs.com/google_containers --cri-socket unix:///run/cri-dockerd.sock
[root@k8s-master01 ~]# docker images
REPOSITORY TAG IMAGE ID CREATED
registry.aliyuncs.com/google_containers/kube-apiserver v1.25.3 0346dbd74bcb 3 weeks ago
registry.aliyuncs.com/google_containers/kube-scheduler v1.25.3 6d23ec0e8b87 3 weeks ago
registry.aliyuncs.com/google_containers/kube-controller-manager v1.25.3 603999231275 3 weeks ago
registry.aliyuncs.com/google_containers/kube-proxy v1.25.3 beaaf00edd38 3 weeks ago
registry.aliyuncs.com/google_containers/pause 3.8 4873874c08ef 4 months ago
registry.aliyuncs.com/google_containers/etcd 3.5.4-0 a8a176a5d5d6 5 months ago
registry.aliyuncs.com/google_containers/coredns v1.9.3 5185b96f0bec 5 months ago
[root@k8s-master01 ~]# kubeadm init --control-plane-endpoint="kubeapi.wang.org" --kubernetes-version=v1.25.3 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --token-ttl=0 --cri-socket unix:///run/cri-dockerd.sock --upload-certs --image-repository registry.aliyuncs.com/google_containers
#如提示以下信息，代表初始化完成，请记录信息，以便后续使用：
.....
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
Alternatively, if you are the root user, you can run:
export KUBECONFIG=/etc/kubernetes/admin.conf
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of the control-plane node running the following command on each as root:
kubeadm join kubeapi.wang.org:6443 --token s800nl.dtylo6tpgghpre7p \
--discovery-token-ca-cert-hash sha256:a13ee9d0212edbd255fe0c5929186725b217a650f0b04ba75c6a1d6e67576aea \
--control-plane --certificate-key 185090182962d3e322ff37a902734bfdd769e8e6e82d796bc882d0b1967c9886
Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use
"kubeadm init phase upload-certs --upload-certs" to reload certs afterward.
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join kubeapi.wang.org:6443 --token s800nl.dtylo6tpgghpre7p \
--discovery-token-ca-cert-hash sha256:a13ee9d0212edbd255fe0c5929186725b217a650f0b04ba75c6a1d6e67576aea
[root@k8s-master01 ~]# mkdir -p $HOME/.kube
[root@k8s-master01 ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@k8s-master01 ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
#如果初始化报如下错误：
Error getting node" err="node \"k8s-master01\" not found
#1、在cri-docker.service文件指定下pause版本：
[root@k8s-master01 ~]# vim /usr/lib/systemd/system/cri-docker.service
ExecStart=/usr/bin/cri-dockerd --pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.8 --container-runtime-endpoint fd:// --network-plugin=cni --cni-bin-dir=/opt/cni/bin --cni-cache-dir=/var/lib/cni/cache --cni-conf-dir=/etc/cni/net.d
#2、重启服务：
systemctl daemon-reload
systemctl restart cri-docker.service
#3、重置集群：
kubeadm reset --cri-socket unix:///run/cri-dockerd.sock && rm -rf /etc/kubernetes/ /var/lib/kubelet /var/lib/dockershim /var/run/kubernetes /var/lib/cni /etc/cni/net.d7、部署网络插件
#所有节点执行：
#下载链接：
https://github.com/flannel-io/flannel/releases
[root@k8s-master01 ~]# cp flanneld-amd64 /opt/bin/flanneld
[root@k8s-master01 ~]# chmod +x /opt/bin/flanneld
[root@k8s-master01 ~]# ll /opt/bin/flanneld
-rwxr-xr-x 1 root root 39358256 11月 4 22:46 /opt/bin/flanneld*
#第一个主节点执行：
#部署kube-flannel
[root@k8s-master01 ~]# kubectl apply -f https://raw.githubusercontent.com/flannel-io/flannel/master/Documentation/kube-flannel.yml
namespace/kube-flannel created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds created
#确认Pod的状态为“Running”
[root@k8s-master01 ~]# kubectl get pods -n kube-flannel
NAME READY STATUS RESTARTS AGE
kube-flannel-ds-9bkgl 1/1 Running 0 50s
#此时，k8s-master01已经就绪
[root@k8s-master01 ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master01 Ready control-plane 20m v1.25.38、添加其他节点到集群中
#k8s-master02和k8s-master03执行：
#k8s-master02和k8s-master03加入集群
[root@k8s-master02 ~]# kubeadm join kubeapi.wang.org:6443 --token s800nl.dtylo6tpgghpre7p --discovery-token-ca-cert-hash sha256:a13ee9d0212edbd255fe0c5929186725b217a650f0b04ba75c6a1d6e67576aea --control-plane --certificate-key 185090182962d3e322ff37a902734bfdd769e8e6e82d796bc882d0b1967c9886 --cri-socket unix:///run/cri-dockerd.sock
#注意，命令需要加上--cri-socket unix:///run/cri-dockerd.sock #k8s-node01、k8s-node02、k8s-node03执行
#node节点加入集群
[root@k8s-node01 ~]# kubeadm join kubeapi.wang.org:6443 --token s800nl.dtylo6tpgghpre7p --discovery-token-ca-cert-hash sha256:a13ee9d0212edbd255fe0c5929186725b217a650f0b04ba75c6a1d6e67576aea --cri-socket unix:///run/cri-dockerd.sock
#注意，命令需要加上--cri-socket unix:///run/cri-dockerd.sock #第一节点验证节点添加结果
[root@k8s-master01 ~]#kubectl get nodes
NAME STATUS ROLES AGE VERSION
k8s-master01 Ready control-plane 25m v1.25.3
k8s-master02 Ready control-plane 10m v1.25.3
k8s-master03 Ready control-plane 8m41s v1.25.3
k8s-node01 Ready <none> 6m54s v1.25.3
k8s-node02 Ready <none> 6m31s v1.25.3
k8s-node03 Ready <none> 6m5s v1.25.3
9、部署nginx测试
[root@k8s-master01 ~]#kubectl create deployment nginx --image nginx:alpine --replicas=3
deployment.apps/nginx created
[root@k8s-master01 ~]#kubectl get pods
NAME READY STATUS RESTARTS AGE
nginx-55f494c486-4js9n 1/1 Running 0 58s
nginx-55f494c486-fsgxq 1/1 Running 0 58s
nginx-55f494c486-z2gzv 1/1 Running 0 58s
[root@k8s-master01 ~]#kubectl get pods -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-55f494c486-4js9n 1/1 Running 0 4m31s 10.244.3.2 k8s-node01 <none> <none>
nginx-55f494c486-fsgxq 1/1 Running 0 4m31s 10.244.4.2 k8s-node02 <none> <none>
nginx-55f494c486-z2gzv 1/1 Running 0 4m31s 10.244.5.2 k8s-node03 <none> <none>
[root@k8s-master01 ~]#curl 10.244.4.2
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
html { color-scheme: light dark; }
body { width: 35em; margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif; }
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>
<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>
<p><em>Thank you for using nginx.</em></p>
</body>
</html>
#删除pod，自动拉起
[root@k8s-master01 ~]#kubectl delete pods nginx-55f494c486-fsgxq
pod "nginx-55f494c486-fsgxq" deleted
[root@k8s-master01 ~]#kubectl get pods -owide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-55f494c486-4js9n 1/1 Running 0 11m 10.244.3.2 k8s-node01 <none> <none>
nginx-55f494c486-xqcph 1/1 Running 0 16s 10.244.4.3 k8s-node02 <none> <none>
nginx-55f494c486-z2gzv 1/1 Running 0 11m 10.244.5.2 k8s-node03 <none> <none>
[root@k8s-master01 ~]#kubectl create service nodeport nginx --tcp=80:80
service/nginx created
[root@k8s-master01 ~]#kubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 89m
nginx NodePort 10.103.151.47 <none> 80:31901/TCP 18s
[root@k8s-master01 ~]#curl 10.103.151.47
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
html { color-scheme: light dark; }
body { width: 35em; margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif; }
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>
<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>
<p><em>Thank you for using nginx.</em></p>
</body>
</html>
#外部访问任意node几点ip加端口（注意，随机产生）都可以访问