首页 > 其他分享 >实验7：基于REST API的SDN北向应用实践 实验

实验7：基于REST API的SDN北向应用实践 实验

时间：2022-11-03 08:22:21浏览次数：37  
标签：tagged frame VLAN REST API 实验 33024 type port

一、实验目的
能够编写程序调用OpenDaylight REST API实现特定网络功能；
能够编写程序调用Ryu REST API实现特定网络功能。
二、实验环境
下载虚拟机软件Oracle VisualBox或VMware；
在虚拟机中安装Ubuntu 20.04 Desktop amd64，并完整安装Mininet、OpenDaylight（Carbon版本）、Postman和Ryu；
三、实验要求
（一）基本要求
编写Python程序，调用OpenDaylight的北向接口实现以下功能
（1） 利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；
连接OpenDaylight

./distribution-karaf-0.6.4-Carbon/bin/karaf
创建拓扑

sudo mn --topo=single,3 --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow13

（2） 下发指令删除s1上的流表数据。

!/usr/bin/python

import requests
from requests.auth import HTTPBasicAuth
if name == "main":
url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/'
headers = {'Content-Type': 'application/json'}
res = requests.delete(url, headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
print (res.content)
（3） 下发硬超时流表，实现拓扑内主机h1和h3网络中断20s。

!/usr/bin/python

import requests
from requests.auth import HTTPBasicAuth
if name == "main":
url = 'http://127.0.0.1:8181/restconf/config/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/flow/1'
with open("./flowtimeout.json") as file:
str = file.read()
headers = {'Content-Type': 'application/json'}
res = requests.put(url, str, headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
print (res.content)
{
"flow": [
{
"id": "1",
"match": {
"in-port": "1",
"ethernet-match": {
"ethernet-type": {
"type": "0x0800"
}
},
"ipv4-destination": "10.0.0.3/32"
},
"instructions": {
"instruction": [
{
"order": "0",
"apply-actions": {
"action": [
{
"order": "0",
"drop-action": {}
}
]
}
}
]
},
"flow-name": "flow",
"priority": "65535",
"hard-timeout": "20",
"cookie": "2",
"table_id": "0"
}
]
}
（4） 获取s1上活动的流表数。

!/usr/bin/python

import requests
from requests.auth import HTTPBasicAuth
if name == "main":
url = 'http://127.0.0.1:8181/restconf/operational/opendaylight-inventory:nodes/node/openflow:1/flow-node-inventory:table/0/opendaylight-flow-table-statistics:flow-table-statistics'
headers = {'Content-Type': 'application/json'}
res = requests.get(url,headers=headers, auth=HTTPBasicAuth('admin', 'admin'))
print (res.content)
2编写Python程序，调用Ryu的北向接口实现以下功能
（1） 实现上述OpenDaylight实验拓扑上相同的硬超时流表下发。
打开ryu控制器

ryu-manager ryu.app.simple_switch_13 ryu.app.ofctl_rest

!/usr/bin/python

import requests
if name == "main":
url = 'http://127.0.0.1:8080/stats/flowentry/add'
with open("./hardtimeout.json") as file:
str = file.read()
headers = {'Content-Type': 'application/json'}
res = requests.post(url, str, headers=headers)
print (res.content)
{
"dpid": 1,
"cookie": 1,
"cookie_mask": 1,
"table_id": 0,
"hard_timeout": 20,
"priority": 65535,
"flags": 1,
"match":{
"in_port":1
},
"actions":[]
}
（2） 参考Ryu REST API的文档，基于VLAN实验的网络拓扑，编程实现相同的VLAN配置。

from mininet.topo import Topo

class MyTopo(Topo):
def init(self):
# initilaize topology
Topo.init(self)

    self.addSwitch("s1")
    self.addSwitch("s2")

    self.addHost("h1")
    self.addHost("h2")
    self.addHost("h3")
    self.addHost("h4")

    self.addLink("s1", "h1")
    self.addLink("s1", "h2")
    self.addLink("s2", "h3")
    self.addLink("s2", "h4")
    self.addLink("s1", "s2")

topos = {'mytopo': (lambda: MyTopo())}
curl -X POST -d '{
"dpid": 1,
"priority": 1,
"match":{
"in_port": 1
},
"actions":[
{
"type": "PUSH_VLAN", # Push a new VLAN tag if a input frame is non-VLAN-tagged
"ethertype": 33024 # Ethertype 0x8100(=33024): IEEE 802.1Q VLAN-tagged frame
},
{
"type": "SET_FIELD",
"field": "vlan_vid", # Set VLAN ID
"value": 4096 # Describe sum of vlan_id(e.g. 6) | OFPVID_PRESENT(0x1000=4096)
},
{
"type": "OUTPUT",
"port": 3
}
]
}' http://localhost:8080/stats/flowentry/add

curl -X POST -d '{
"dpid": 1,
"priority": 1,
"match":{
"in_port": 2
},
"actions":[
{
"type": "PUSH_VLAN", # Push a new VLAN tag if a input frame is non-VLAN-tagged
"ethertype": 33024 # Ethertype 0x8100(=33024): IEEE 802.1Q VLAN-tagged frame
},
{
"type": "SET_FIELD",
"field": "vlan_vid", # Set VLAN ID
"value": 4097 # Describe sum of vlan_id(e.g. 6) | OFPVID_PRESENT(0x1000=4096)
},
{
"type": "OUTPUT",
"port": 3
}
]
}' http://localhost:8080/stats/flowentry/add

将主机3，4发送来的包取出vlan标记

curl -X POST -d '{
"dpid": 1,
"priority": 1,
"match":{
"vlan_vid": 0
},
"actions":[
{
"type": "POP_VLAN", # Push a new VLAN tag if a input frame is non-VLAN-tagged
"ethertype": 33024 # Ethertype 0x8100(=33024): IEEE 802.1Q VLAN-tagged frame
},
{
"type": "OUTPUT",
"port": 1
}
]
}' http://localhost:8080/stats/flowentry/add

curl -X POST -d '{
"dpid": 1,
"priority": 1,
"match":{
"vlan_vid": 1
},
"actions":[
{
"type": "POP_VLAN", # Push a new VLAN tag if a input frame is non-VLAN-tagged
"ethertype": 33024 # Ethertype 0x8100(=33024): IEEE 802.1Q VLAN-tagged frame
},
{
"type": "OUTPUT",
"port": 2
}
]
}' http://localhost:8080/stats/flowentry/add

将主机3，4发送来的包打上vlan标记

curl -X POST -d '{
"dpid": 2,
"priority": 1,
"match":{
"in_port": 1
},
"actions":[
{
"type": "PUSH_VLAN", # Push a new VLAN tag if a input frame is non-VLAN-tagged
"ethertype": 33024 # Ethertype 0x8100(=33024): IEEE 802.1Q VLAN-tagged frame
},
{
"type": "SET_FIELD",
"field": "vlan_vid", # Set VLAN ID
"value": 4096 # Describe sum of vlan_id(e.g. 6) | OFPVID_PRESENT(0x1000=4096)
},
{
"type": "OUTPUT",
"port": 3
}
]
}' http://localhost:8080/stats/flowentry/add

curl -X POST -d '{
"dpid": 2,
"priority": 1,
"match":{
"in_port": 2
},
"actions":[
{
"type": "PUSH_VLAN", # Push a new VLAN tag if a input frame is non-VLAN-tagged
"ethertype": 33024 # Ethertype 0x8100(=33024): IEEE 802.1Q VLAN-tagged frame
},
{
"type": "SET_FIELD",
"field": "vlan_vid", # Set VLAN ID
"value": 4097 # Describe sum of vlan_id(e.g. 6) | OFPVID_PRESENT(0x1000=4096)
},
{
"type": "OUTPUT",
"port": 3
}
]
}' http://localhost:8080/stats/flowentry/add

curl -X POST -d '{
"dpid": 2,
"priority": 1,
"match":{
"vlan_vid": 0
},
"actions":[
{
"type": "POP_VLAN", # Push a new VLAN tag if a input frame is non-VLAN-tagged
"ethertype": 33024 # Ethertype 0x8100(=33024): IEEE 802.1Q VLAN-tagged frame
},
{
"type": "OUTPUT",
"port": 1
}
]
}' http://localhost:8080/stats/flowentry/add

curl -X POST -d '{
"dpid": 2,
"priority": 1,
"match":{
"vlan_vid": 1
},
"actions":[
{
"type": "POP_VLAN", # Push a new VLAN tag if a input frame is non-VLAN-tagged
"ethertype": 33024 # Ethertype 0x8100(=33024): IEEE 802.1Q VLAN-tagged frame
},
{
"type": "OUTPUT",
"port": 2
}
]
}' http://localhost:8080/stats/flowentry/add
提示：拓扑生成后需连接Ryu，且Ryu应能够提供REST API服务
（二）进阶要求
OpenDaylight或Ryu任选其一，编程实现查看前序VLAN实验拓扑中所有节点（含交换机、主机）的名称，以及显示每台交换机的所有流表项。

（三）实验报告
总结：本次实验操作是前面几次实验的综合起来，难度适中，主要通过执行py代码来实现操作，需要通过api来完成各种功能，实验中需要使用到curl命令，需要通过sudo apt install curl来下载，才能实现删除流表。

标签：tagged,frame,VLAN,REST,API,实验,33024,type,port
From： https://www.cnblogs.com/czhem/p/16853189.html

相关文章

  • 实验7：基于REST API的SDN北向应用实践
    一、实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境下载虚拟机软件OracleVisualBox......
  • 实验7：基于REST API的SDN北向应用实践.
    （一）基本要求编写Python程序，调用OpenDaylight的北向接口实现以下功能（1）利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；（2）下发指令删除s1上的流表数据。#!/......
  • 实验3：OpenFlow协议分析实践
    一、实验目的能够运用wireshark对OpenFlow协议数据交互过程进行抓包；能够借助包解析工具，分析与解释OpenFlow协议的数据包交互过程与机制。二、实验环境Ubuntu2......
  • 实验7：基于REST API的SDN北向应用实践
    （一）基本要求编写Python程序，调用OpenDaylight的北向接口实现以下功能（1）利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；（2）下发指令删除s1上的流表数据。（3）下......
  • 实验7：基于REST API的SDN北向应用实践
    实验7：基于RESTAPI的SDN北向应用实践一、实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。二、实......
  • 实验7：基于REST API的SDN北向应用实践
    实验7：基于RESTAPI的SDN北向应用实践一、实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验......
  • 实验三 函数应用编程
    实验任务一task1.c#include<stdio.h>#include<stdlib.h>#include<time.h>#include<Windows.h>#defineN80voidprint_text(intline,intcol,chartext[]);voidpri......
  • 实验7：基于REST API的SDN北向应用实践
    （一）基本要求编写Python程序，调用OpenDaylight的北向接口实现以下功能（1）利用Mininet平台搭建下图所示网络拓扑，并连接OpenDaylight；（2）下发指令删除s1上的流表数据。创建odl......
  • 实验7：基于REST API的SDN北向应用实践
    一、实验目的能够编写程序调用OpenDaylightRESTAPI实现特定网络功能；能够编写程序调用RyuRESTAPI实现特定网络功能。二、实验环境下载虚拟机软件OracleVisualBo......
  • 实验3 C语言控制语句应用编程
    #include<stdio.h>#include<stdlib.h>#include<time.h>#include<windows.h>#defineN80voidprint_text(intline,intcol,chartext[]);voidprint_spaces......

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99