apache-skywalking-apm-10.1.0使用
本文主要介绍如何使用apache-skywalking-apm-10.1.0，同时配合elasticsearch-8.17.0-windows-x86_64来作为存储 es持久化数据使用。
步骤如下：
一、下载elasticsearch-8.17.0-windows-x86_64
1、下载ES(elasticsearch 简称 ES 下载链接：https://www.elastic.co/downloads/elasticsearch) ES 下载链接：https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-8.17.0-windows-x86_64.zip))，需要在修改ES配置，进入ES解压以后的文件下的config目录，找到elasticsearch.yml，打开后修改自己需要的配置，可以参考https://www.cnblogs.com/1175429393wljblog/p/18635850二、下载skywalking
下载地址：https://skywalking.apache.org/downloads/，之后再解压，如下：
下载之后解压
三、安装jdk21
elasticsearch-8.17.0自带的jdk23版本过高，skywalking-v10.1.0无法使用。需要skywalking-v10.1.0最高支持jdk21，所以需要下载对应版本的jdk，即下载jdk21，下载地址：https://jdk.java.net/archive/，java环境配置参考：https://blog.csdn.net/smdai/article/details/140670008
可以从 Oracle 的 JDK 下载页面 或者使用 AdoptOpenJDK 等其他来源下载和安装。如果是安装包，则安装完成后，你可以使用以下命令 java -version，在命令提示符中确认 JDK 是否安装成功，
如果绿色版本的https://download.java.net/java/GA/jdk21.0.2/f2283984656d49d69e91c558476027ac/13/GPL/openjdk-21.0.2_windows-x64_bin.zip，只需要解压道指定目录即可，
本文采用的是绿色版本的，https://download.java.net/java/GA/jdk21.0.2/f2283984656d49d69e91c558476027ac/13/GPL/openjdk-21.0.2_windows-x64_bin.zip下载的。
1、配置 JAVA_HOME 环境变量
1.1 设置 JAVA_HOME
打开系统属性：
右键点击桌面的“此电脑”图标，选择“属性”。
在打开的窗口左侧，点击“高级系统设置”。
1.2 打开环境变量设置：
在“系统属性”窗口中，点击“高级”选项卡下的“环境变量”按钮。
添加 JAVA_HOME：
在环境变量窗口中，在“系统变量”下点击“新建”按钮。
在“变量名”中输入 JAVA_HOME，在“变量值”中输入 JDK 的安装路径，例如 C:\Program Files\Java\jdk-17。本文采用绿色版本，解压目录为D:\soft\java\openjdk-21.0.2_windows-x64_bin\jdk-21.0.2
2、 配置 PATH 变量
编辑 PATH 变量：
在“系统变量”下找到 Path，选择并点击“编辑”按钮。
在“编辑环境变量”窗口中，点击“新建”，然后添加 %JAVA_HOME%\bin。
3、 验证配置
配置完成后，打开新的命令提示符窗口，运行以下命令验证：
echo %JAVA_HOME%
它应该输出你设置的 JDK 路径。你还可以运行java -version和javac -version以确保 Java 和 Java 编译器的版本正确。
多 JDK 版本切换（可选）
如果你有多个 JDK 版本安装并需要切换，可以通过修改 JAVA_HOME 变量的值来实现。你可以手动更改，或者编写一个批处理脚本来快速切换。
例如，创建一个批处理文件 switchJDK.bat，内容如下：
@echo off
setlocal
set JDK8="C:\Program Files\Java\jdk1.8.0_271"
set JDK11="C:\Program Files\Java\jdk-11.0.9"
set JDK17="C:\Program Files\Java\jdk-17"
if "%1"=="8" (
set JAVA_HOME=%JDK8%
) else if "%1"=="11" (
set JAVA_HOME=%JDK11%
) else if "%1"=="17" (
set JAVA_HOME=%JDK17%
) else (
echo Invalid JDK version
exit /b 1
)
setx JAVA_HOME "%JAVA_HOME%"
echo JAVA_HOME set to %JAVA_HOME%
endlocal
使用此脚本切换 JDK 版本时，只需在命令提示符中运行：
switchJDK 8 // 切换到 JDK 8 switchJDK 11 // 切换到 JDK 11 switchJDK 17 // 切换到 JDK 17
这样可以方便地在不同版本的 JDK 之间切换。
四、修改配置apache-skywalking-apm-10.1.0
apache-skywalking-apm-10.1.0解压到D:\Temp\1\apache-skywalking-apm-bin目录，修改D:\Temp\1\apache-skywalking-apm-bin\config下的application.yml以及log4j2.xml
修改collector收集器 配置文件D:\Temp\1\apache-skywalking-apm-bin\config
1、修改application.yml
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
cluster:
selector: ${SW_CLUSTER:standalone}
standalone:
# Please check your ZooKeeper is 3.5+, However, it is also compatible with ZooKeeper 3.4.x. Replace the ZooKeeper 3.5+
# library the oap-libs folder with your ZooKeeper 3.4.x library.
zookeeper:
namespace: ${SW_NAMESPACE:""}
hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181}
# Retry Policy
baseSleepTimeMs: ${SW_CLUSTER_ZK_SLEEP_TIME:1000} # initial amount of time to wait between retries
maxRetries: ${SW_CLUSTER_ZK_MAX_RETRIES:3} # max number of times to retry
# Enable ACL
enableACL: ${SW_ZK_ENABLE_ACL:false} # disable ACL in default
schema: ${SW_ZK_SCHEMA:digest} # only support digest schema
expression: ${SW_ZK_EXPRESSION:skywalking:skywalking}
internalComHost: ${SW_CLUSTER_INTERNAL_COM_HOST:""}
internalComPort: ${SW_CLUSTER_INTERNAL_COM_PORT:-1}
kubernetes:
namespace: ${SW_CLUSTER_K8S_NAMESPACE:default}
labelSelector: ${SW_CLUSTER_K8S_LABEL:app=collector,release=skywalking}
uidEnvName: ${SW_CLUSTER_K8S_UID:SKYWALKING_COLLECTOR_UID}
consul:
serviceName: ${SW_SERVICE_NAME:"SkyWalking_OAP_Cluster"}
# Consul cluster nodes, example: 10.0.0.1:8500,10.0.0.2:8500,10.0.0.3:8500
hostPort: ${SW_CLUSTER_CONSUL_HOST_PORT:localhost:8500}
aclToken: ${SW_CLUSTER_CONSUL_ACLTOKEN:""}
internalComHost: ${SW_CLUSTER_INTERNAL_COM_HOST:""}
internalComPort: ${SW_CLUSTER_INTERNAL_COM_PORT:-1}
etcd:
# etcd cluster nodes, example: 10.0.0.1:2379,10.0.0.2:2379,10.0.0.3:2379
endpoints: ${SW_CLUSTER_ETCD_ENDPOINTS:localhost:2379}
namespace: ${SW_CLUSTER_ETCD_NAMESPACE:/skywalking}
serviceName: ${SW_CLUSTER_ETCD_SERVICE_NAME:"SkyWalking_OAP_Cluster"}
authentication: ${SW_CLUSTER_ETCD_AUTHENTICATION:false}
user: ${SW_CLUSTER_ETCD_USER:}
password: ${SW_CLUSTER_ETCD_PASSWORD:}
internalComHost: ${SW_CLUSTER_INTERNAL_COM_HOST:""}
internalComPort: ${SW_CLUSTER_INTERNAL_COM_PORT:-1}
nacos:
serviceName: ${SW_SERVICE_NAME:"SkyWalking_OAP_Cluster"}
hostPort: ${SW_CLUSTER_NACOS_HOST_PORT:localhost:8848}
# Nacos Naming namespace
namespace: ${SW_CLUSTER_NACOS_NAMESPACE:"public"}
contextPath: ${SW_CLUSTER_NACOS_CONTEXT_PATH:""}
# Nacos auth username
username: ${SW_CLUSTER_NACOS_USERNAME:""}
password: ${SW_CLUSTER_NACOS_PASSWORD:""}
# Nacos auth accessKey
accessKey: ${SW_CLUSTER_NACOS_ACCESSKEY:""}
secretKey: ${SW_CLUSTER_NACOS_SECRETKEY:""}
internalComHost: ${SW_CLUSTER_INTERNAL_COM_HOST:""}
internalComPort: ${SW_CLUSTER_INTERNAL_COM_PORT:-1}
core:
selector: ${SW_CORE:default}
default:
# Mixed: Receive agent data, Level 1 aggregate, Level 2 aggregate
# Receiver: Receive agent data, Level 1 aggregate
# Aggregator: Level 2 aggregate
role: ${SW_CORE_ROLE:Mixed} # Mixed/Receiver/Aggregator
restHost: ${SW_CORE_REST_HOST:0.0.0.0}
restPort: ${SW_CORE_REST_PORT:12800}
restContextPath: ${SW_CORE_REST_CONTEXT_PATH:/}
restMaxThreads: ${SW_CORE_REST_MAX_THREADS:200}
restIdleTimeOut: ${SW_CORE_REST_IDLE_TIMEOUT:30000}
restAcceptQueueSize: ${SW_CORE_REST_QUEUE_SIZE:0}
httpMaxRequestHeaderSize: ${SW_CORE_HTTP_MAX_REQUEST_HEADER_SIZE:8192}
gRPCHost: ${SW_CORE_GRPC_HOST:0.0.0.0}
gRPCPort: ${SW_CORE_GRPC_PORT:11800}
maxConcurrentCallsPerConnection: ${SW_CORE_GRPC_MAX_CONCURRENT_CALL:0}
maxMessageSize: ${SW_CORE_GRPC_MAX_MESSAGE_SIZE:52428800} #50MB
gRPCThreadPoolSize: ${SW_CORE_GRPC_THREAD_POOL_SIZE:-1}
gRPCSslEnabled: ${SW_CORE_GRPC_SSL_ENABLED:false}
gRPCSslKeyPath: ${SW_CORE_GRPC_SSL_KEY_PATH:""}
gRPCSslCertChainPath: ${SW_CORE_GRPC_SSL_CERT_CHAIN_PATH:""}
gRPCSslTrustedCAPath: ${SW_CORE_GRPC_SSL_TRUSTED_CA_PATH:""}
downsampling:
- Hour
- Day
# Set a timeout on metrics data. After the timeout has expired, the metrics data will automatically be deleted.
enableDataKeeperExecutor: ${SW_CORE_ENABLE_DATA_KEEPER_EXECUTOR:true} # Turn it off then automatically metrics data delete will be close.
dataKeeperExecutePeriod: ${SW_CORE_DATA_KEEPER_EXECUTE_PERIOD:5} # How often the data keeper executor runs periodically, unit is minute
recordDataTTL: ${SW_CORE_RECORD_DATA_TTL:3} # Unit is day
metricsDataTTL: ${SW_CORE_METRICS_DATA_TTL:7} # Unit is day
# The period of L1 aggregation flush to L2 aggregation. Unit is ms.
l1FlushPeriod: ${SW_CORE_L1_AGGREGATION_FLUSH_PERIOD:500}
# The threshold of session time. Unit is ms. Default value is 70s.
storageSessionTimeout: ${SW_CORE_STORAGE_SESSION_TIMEOUT:70000}
# The period of doing data persistence. Unit is second.Default value is 25s
persistentPeriod: ${SW_CORE_PERSISTENT_PERIOD:25}
topNReportPeriod: ${SW_CORE_TOPN_REPORT_PERIOD:10} # top_n record worker report cycle, unit is minute
# Extra model column are the column defined by in the codes, These columns of model are not required logically in aggregation or further query,
# and it will cause more load for memory, network of OAP and storage.
# But, being activated, user could see the name in the storage entities, which make users easier to use 3rd party tool, such as Kibana->ES, to query the data by themselves.
activeExtraModelColumns: ${SW_CORE_ACTIVE_EXTRA_MODEL_COLUMNS:false}
# The max length of service + instance names should be less than 200
serviceNameMaxLength: ${SW_SERVICE_NAME_MAX_LENGTH:70}
# The period(in seconds) of refreshing the service cache. Default value is 10s.
serviceCacheRefreshInterval: ${SW_SERVICE_CACHE_REFRESH_INTERVAL:10}
instanceNameMaxLength: ${SW_INSTANCE_NAME_MAX_LENGTH:70}
# The max length of service + endpoint names should be less than 240
endpointNameMaxLength: ${SW_ENDPOINT_NAME_MAX_LENGTH:150}
# Define the set of span tag keys, which should be searchable through the GraphQL.
# The max length of key=value should be less than 256 or will be dropped.
searchableTracesTags: ${SW_SEARCHABLE_TAG_KEYS:http.method,http.status_code,rpc.status_code,db.type,db.instance,mq.queue,mq.topic,mq.broker}
# Define the set of log tag keys, which should be searchable through the GraphQL.
# The max length of key=value should be less than 256 or will be dropped.
searchableLogsTags: ${SW_SEARCHABLE_LOGS_TAG_KEYS:level,http.status_code}
# Define the set of alarm tag keys, which should be searchable through the GraphQL.
# The max length of key=value should be less than 256 or will be dropped.
searchableAlarmTags: ${SW_SEARCHABLE_ALARM_TAG_KEYS:level}
# The max size of tags keys for autocomplete select.
autocompleteTagKeysQueryMaxSize: ${SW_AUTOCOMPLETE_TAG_KEYS_QUERY_MAX_SIZE:100}
# The max size of tags values for autocomplete select.
autocompleteTagValuesQueryMaxSize: ${SW_AUTOCOMPLETE_TAG_VALUES_QUERY_MAX_SIZE:100}
# The number of threads used to prepare metrics data to the storage.
prepareThreads: ${SW_CORE_PREPARE_THREADS:2}
# Turn it on then automatically grouping endpoint by the given OpenAPI definitions.
enableEndpointNameGroupingByOpenapi: ${SW_CORE_ENABLE_ENDPOINT_NAME_GROUPING_BY_OPENAPI:true}
# The period of HTTP URI pattern recognition. Unit is second.
syncPeriodHttpUriRecognitionPattern: ${SW_CORE_SYNC_PERIOD_HTTP_URI_RECOGNITION_PATTERN:10}
# The training period of HTTP URI pattern recognition. Unit is second.
trainingPeriodHttpUriRecognitionPattern: ${SW_CORE_TRAINING_PERIOD_HTTP_URI_RECOGNITION_PATTERN:60}
# The max number of HTTP URIs per service for further URI pattern recognition.
maxHttpUrisNumberPerService: ${SW_CORE_MAX_HTTP_URIS_NUMBER_PER_SVR:3000}
# If disable the hierarchy, the service and instance hierarchy relation will not be built. And the query of hierarchy will return empty result.
# All the hierarchy relations are defined in the `hierarchy-definition.yml`.
# Notice: some of the configurations only available for kubernetes environments.
enableHierarchy: ${SW_CORE_ENABLE_HIERARCHY:true}
storage:
selector: ${SW_STORAGE:elasticsearch}
elasticsearch:
namespace: ${SW_NAMESPACE:"linjie"}
clusterNodes: ${SW_STORAGE_ES_CLUSTER_NODES:localhost:9200}
protocol: ${SW_STORAGE_ES_HTTP_PROTOCOL:"http"}
connectTimeout: ${SW_STORAGE_ES_CONNECT_TIMEOUT:3000}
socketTimeout: ${SW_STORAGE_ES_SOCKET_TIMEOUT:30000}
responseTimeout: ${SW_STORAGE_ES_RESPONSE_TIMEOUT:15000}
numHttpClientThread: ${SW_STORAGE_ES_NUM_HTTP_CLIENT_THREAD:0}
user: ${SW_ES_USER:""}
password: ${SW_ES_PASSWORD:""}
trustStorePath: ${SW_STORAGE_ES_SSL_JKS_PATH:""}
trustStorePass: ${SW_STORAGE_ES_SSL_JKS_PASS:""}
secretsManagementFile: ${SW_ES_SECRETS_MANAGEMENT_FILE:""} # Secrets management file in the properties format includes the username, password, which are managed by 3rd party tool.
dayStep: ${SW_STORAGE_DAY_STEP:1} # Represent the number of days in the one minute/hour/day index.
indexShardsNumber: ${SW_STORAGE_ES_INDEX_SHARDS_NUMBER:1} # Shard number of new indexes
indexReplicasNumber: ${SW_STORAGE_ES_INDEX_REPLICAS_NUMBER:1} # Replicas number of new indexes
# Specify the settings for each index individually.
# If configured, this setting has the highest priority and overrides the generic settings.
specificIndexSettings: ${SW_STORAGE_ES_SPECIFIC_INDEX_SETTINGS:""}
# Super data set has been defined in the codes, such as trace segments.The following 3 config would be improve es performance when storage super size data in es.
superDatasetDayStep: ${SW_STORAGE_ES_SUPER_DATASET_DAY_STEP:-1} # Represent the number of days in the super size dataset record index, the default value is the same as dayStep when the value is less than 0
superDatasetIndexShardsFactor: ${SW_STORAGE_ES_SUPER_DATASET_INDEX_SHARDS_FACTOR:5} # This factor provides more shards for the super data set, shards number = indexShardsNumber * superDatasetIndexShardsFactor. Also, this factor effects Zipkin traces.
superDatasetIndexReplicasNumber: ${SW_STORAGE_ES_SUPER_DATASET_INDEX_REPLICAS_NUMBER:0} # Represent the replicas number in the super size dataset record index, the default value is 0.
indexTemplateOrder: ${SW_STORAGE_ES_INDEX_TEMPLATE_ORDER:0} # the order of index template
bulkActions: ${SW_STORAGE_ES_BULK_ACTIONS:5000} # Execute the async bulk record data every ${SW_STORAGE_ES_BULK_ACTIONS} requests
batchOfBytes: ${SW_STORAGE_ES_BATCH_OF_BYTES:10485760} # A threshold to control the max body size of ElasticSearch Bulk flush.
# flush the bulk every 5 seconds whatever the number of requests
flushInterval: ${SW_STORAGE_ES_FLUSH_INTERVAL:5}
concurrentRequests: ${SW_STORAGE_ES_CONCURRENT_REQUESTS:2} # the number of concurrent requests
resultWindowMaxSize: ${SW_STORAGE_ES_QUERY_MAX_WINDOW_SIZE:10000}
metadataQueryMaxSize: ${SW_STORAGE_ES_QUERY_MAX_SIZE:10000}
scrollingBatchSize: ${SW_STORAGE_ES_SCROLLING_BATCH_SIZE:5000}
segmentQueryMaxSize: ${SW_STORAGE_ES_QUERY_SEGMENT_SIZE:200}
profileTaskQueryMaxSize: ${SW_STORAGE_ES_QUERY_PROFILE_TASK_SIZE:200}
profileDataQueryBatchSize: ${SW_STORAGE_ES_QUERY_PROFILE_DATA_BATCH_SIZE:100}
oapAnalyzer: ${SW_STORAGE_ES_OAP_ANALYZER:"{\"analyzer\":{\"oap_analyzer\":{\"type\":\"stop\"}}}"} # the oap analyzer.
oapLogAnalyzer: ${SW_STORAGE_ES_OAP_LOG_ANALYZER:"{\"analyzer\":{\"oap_log_analyzer\":{\"type\":\"standard\"}}}"} # the oap log analyzer. It could be customized by the ES analyzer configuration to support more language log formats, such as Chinese log, Japanese log and etc.
advanced: ${SW_STORAGE_ES_ADVANCED:""}
# Enable shard metrics and records indices into multi-physical indices, one index template per metric/meter aggregation function or record.
logicSharding: ${SW_STORAGE_ES_LOGIC_SHARDING:false}
# Custom routing can reduce the impact of searches. Instead of having to fan out a search request to all the shards in an index, the request can be sent to just the shard that matches the specific routing value (or values).
enableCustomRouting: ${SW_STORAGE_ES_ENABLE_CUSTOM_ROUTING:false}
h2:
properties:
jdbcUrl: ${SW_STORAGE_H2_URL:jdbc:h2:mem:skywalking-oap-db;DB_CLOSE_DELAY=-1;DATABASE_TO_UPPER=FALSE}
dataSource.user: ${SW_STORAGE_H2_USER:sa}
metadataQueryMaxSize: ${SW_STORAGE_H2_QUERY_MAX_SIZE:5000}
maxSizeOfBatchSql: ${SW_STORAGE_MAX_SIZE_OF_BATCH_SQL:100}
asyncBatchPersistentPoolSize: ${SW_STORAGE_ASYNC_BATCH_PERSISTENT_POOL_SIZE:1}
mysql:
properties:
jdbcUrl: ${SW_JDBC_URL:"jdbc:mysql://localhost:3306/swtest?rewriteBatchedStatements=true&allowMultiQueries=true"}
dataSource.user: ${SW_DATA_SOURCE_USER:root}
dataSource.password: ${SW_DATA_SOURCE_PASSWORD:root@1234}
dataSource.cachePrepStmts: ${SW_DATA_SOURCE_CACHE_PREP_STMTS:true}
dataSource.prepStmtCacheSize: ${SW_DATA_SOURCE_PREP_STMT_CACHE_SQL_SIZE:250}
dataSource.prepStmtCacheSqlLimit: ${SW_DATA_SOURCE_PREP_STMT_CACHE_SQL_LIMIT:2048}
dataSource.useServerPrepStmts: ${SW_DATA_SOURCE_USE_SERVER_PREP_STMTS:true}
metadataQueryMaxSize: ${SW_STORAGE_MYSQL_QUERY_MAX_SIZE:5000}
maxSizeOfBatchSql: ${SW_STORAGE_MAX_SIZE_OF_BATCH_SQL:2000}
asyncBatchPersistentPoolSize: ${SW_STORAGE_ASYNC_BATCH_PERSISTENT_POOL_SIZE:4}
postgresql:
properties:
jdbcUrl: ${SW_JDBC_URL:"jdbc:postgresql://localhost:5432/skywalking"}
dataSource.user: ${SW_DATA_SOURCE_USER:postgres}
dataSource.password: ${SW_DATA_SOURCE_PASSWORD:123456}
dataSource.cachePrepStmts: ${SW_DATA_SOURCE_CACHE_PREP_STMTS:true}
dataSource.prepStmtCacheSize: ${SW_DATA_SOURCE_PREP_STMT_CACHE_SQL_SIZE:250}
dataSource.prepStmtCacheSqlLimit: ${SW_DATA_SOURCE_PREP_STMT_CACHE_SQL_LIMIT:2048}
dataSource.useServerPrepStmts: ${SW_DATA_SOURCE_USE_SERVER_PREP_STMTS:true}
metadataQueryMaxSize: ${SW_STORAGE_MYSQL_QUERY_MAX_SIZE:5000}
maxSizeOfBatchSql: ${SW_STORAGE_MAX_SIZE_OF_BATCH_SQL:2000}
asyncBatchPersistentPoolSize: ${SW_STORAGE_ASYNC_BATCH_PERSISTENT_POOL_SIZE:4}
banyandb:
# Targets is the list of BanyanDB servers, separated by commas.
# Each target is a BanyanDB server in the format of `host:port`
# The host is the IP address or domain name of the BanyanDB server, and the port is the port number of the BanyanDB server.
targets: ${SW_STORAGE_BANYANDB_TARGETS:localhost:17912}
# The max number of records in a bulk write request.
# Bigger value can improve the write performance, but also increase the OAP and BanyanDB Server memory usage.
maxBulkSize: ${SW_STORAGE_BANYANDB_MAX_BULK_SIZE:10000}
# The minimum seconds between two bulk flushes.
# If the data in a bulk is less than maxBulkSize, the data will be flushed after this period.
# If the data in a bulk is more than maxBulkSize, the data will be flushed immediately.
# Bigger value can reduce the write pressure on BanyanDB Server, but also increase the latency of the data.
flushInterval: ${SW_STORAGE_BANYANDB_FLUSH_INTERVAL:15}
# The timeout seconds of a bulk flush.
flushTimeout: ${SW_STORAGE_BANYANDB_FLUSH_TIMEOUT:10}
# The shard number of `measure` groups that store the metrics data.
metricsShardsNumber: ${SW_STORAGE_BANYANDB_METRICS_SHARDS_NUMBER:1}
# The shard number of `stream` groups that store the trace, log and profile data.
recordShardsNumber: ${SW_STORAGE_BANYANDB_RECORD_SHARDS_NUMBER:1}
# The multiplier of the number of shards of the super dataset.
# Super dataset is a special dataset that stores the trace or log data that is too large to be stored in the normal dataset.
# If the normal dataset has `n` shards, the super dataset will have `n * superDatasetShardsFactor` shards.
# For example, supposing `recordShardsNumber` is 3, and `superDatasetShardsFactor` is 2,
# `segment-default` is a normal dataset that has 3 shards, and `segment-minute` is a super dataset that has 6 shards.
superDatasetShardsFactor: ${SW_STORAGE_BANYANDB_SUPERDATASET_SHARDS_FACTOR:2}
# The number of threads that write data to BanyanDB concurrently.
# Bigger value can improve the write performance, but also increase the OAP and BanyanDB Server CPU usage.
concurrentWriteThreads: ${SW_STORAGE_BANYANDB_CONCURRENT_WRITE_THREADS:15}
# The max number of profile task query in a request.
profileTaskQueryMaxSize: ${SW_STORAGE_BANYANDB_PROFILE_TASK_QUERY_MAX_SIZE:200}
# Data is stored in BanyanDB in segments. A segment is a time range of data.
# The segment interval is the time range of a segment.
# The value should be less or equal to data TTL relevant settings.
segmentIntervalDays: ${SW_STORAGE_BANYANDB_SEGMENT_INTERVAL_DAYS:1}
# The super dataset segment interval is the time range of a segment in the super dataset.
superDatasetSegmentIntervalDays: ${SW_STORAGE_BANYANDB_SUPER_DATASET_SEGMENT_INTERVAL_DAYS:1}
# Specific groups settings.
# For example, {"group1": {"blockIntervalHours": 4, "segmentIntervalDays": 1}}
# Please refer to https://github.com/apache/skywalking-banyandb/blob/${BANYANDB_RELEASE}/docs/interacting/bydbctl/schema/group.md#create-operation
# for group setting details.
specificGroupSettings: ${SW_STORAGE_BANYANDB_SPECIFIC_GROUP_SETTINGS:""}
# If the BanyanDB server is configured with TLS, config the TLS cert file path and open tls connection.
sslTrustCAPath: ${SW_STORAGE_BANYANDB_SSL_TRUST_CA_PATH:""}
agent-analyzer:
selector: ${SW_AGENT_ANALYZER:default}
default:
# The default sampling rate and the default trace latency time configured by the 'traceSamplingPolicySettingsFile' file.
traceSamplingPolicySettingsFile: ${SW_TRACE_SAMPLING_POLICY_SETTINGS_FILE:trace-sampling-policy-settings.yml}
slowDBAccessThreshold: ${SW_SLOW_DB_THRESHOLD:default:200,mongodb:100} # The slow database access thresholds. Unit ms.
forceSampleErrorSegment: ${SW_FORCE_SAMPLE_ERROR_SEGMENT:true} # When sampling mechanism active, this config can open(true) force save some error segment. true is default.
segmentStatusAnalysisStrategy: ${SW_SEGMENT_STATUS_ANALYSIS_STRATEGY:FROM_SPAN_STATUS} # Determine the final segment status from the status of spans. Available values are `FROM_SPAN_STATUS` , `FROM_ENTRY_SPAN` and `FROM_FIRST_SPAN`. `FROM_SPAN_STATUS` represents the segment status would be error if any span is in error status. `FROM_ENTRY_SPAN` means the segment status would be determined by the status of entry spans only. `FROM_FIRST_SPAN` means the segment status would be determined by the status of the first span only.
# Nginx and Envoy agents can't get the real remote address.
# Exit spans with the component in the list would not generate the client-side instance relation metrics.
noUpstreamRealAddressAgents: ${SW_NO_UPSTREAM_REAL_ADDRESS:6000,9000}
meterAnalyzerActiveFiles: ${SW_METER_ANALYZER_ACTIVE_FILES:datasource,threadpool,satellite,go-runtime,python-runtime,continuous-profiling,java-agent} # Which files could be meter analyzed, files split by ","
slowCacheReadThreshold: ${SW_SLOW_CACHE_SLOW_READ_THRESHOLD:default:20,redis:10} # The slow cache read operation thresholds. Unit ms.
slowCacheWriteThreshold: ${SW_SLOW_CACHE_SLOW_WRITE_THRESHOLD:default:20,redis:10} # The slow cache write operation thresholds. Unit ms.
log-analyzer:
selector: ${SW_LOG_ANALYZER:default}
default:
lalFiles: ${SW_LOG_LAL_FILES:envoy-als,mesh-dp,mysql-slowsql,pgsql-slowsql,redis-slowsql,k8s-service,nginx,default}
malFiles: ${SW_LOG_MAL_FILES:"nginx"}
event-analyzer:
selector: ${SW_EVENT_ANALYZER:default}
default:
receiver-sharing-server:
selector: ${SW_RECEIVER_SHARING_SERVER:default}
default:
# For HTTP server
restHost: ${SW_RECEIVER_SHARING_REST_HOST:0.0.0.0}
restPort: ${SW_RECEIVER_SHARING_REST_PORT:0}
restContextPath: ${SW_RECEIVER_SHARING_REST_CONTEXT_PATH:/}
restMaxThreads: ${SW_RECEIVER_SHARING_REST_MAX_THREADS:200}
restIdleTimeOut: ${SW_RECEIVER_SHARING_REST_IDLE_TIMEOUT:30000}
restAcceptQueueSize: ${SW_RECEIVER_SHARING_REST_QUEUE_SIZE:0}
httpMaxRequestHeaderSize: ${SW_RECEIVER_SHARING_HTTP_MAX_REQUEST_HEADER_SIZE:8192}
# For gRPC server
gRPCHost: ${SW_RECEIVER_GRPC_HOST:0.0.0.0}
gRPCPort: ${SW_RECEIVER_GRPC_PORT:0}
maxConcurrentCallsPerConnection: ${SW_RECEIVER_GRPC_MAX_CONCURRENT_CALL:0}
maxMessageSize: ${SW_RECEIVER_GRPC_MAX_MESSAGE_SIZE:52428800} #50MB
gRPCThreadPoolSize: ${SW_RECEIVER_GRPC_THREAD_POOL_SIZE:0}
gRPCSslEnabled: ${SW_RECEIVER_GRPC_SSL_ENABLED:false}
gRPCSslKeyPath: ${SW_RECEIVER_GRPC_SSL_KEY_PATH:""}
gRPCSslCertChainPath: ${SW_RECEIVER_GRPC_SSL_CERT_CHAIN_PATH:""}
gRPCSslTrustedCAsPath: ${SW_RECEIVER_GRPC_SSL_TRUSTED_CAS_PATH:""}
authentication: ${SW_AUTHENTICATION:""}
receiver-register:
selector: ${SW_RECEIVER_REGISTER:default}
default:
receiver-trace:
selector: ${SW_RECEIVER_TRACE:default}
default:
receiver-jvm:
selector: ${SW_RECEIVER_JVM:default}
default:
receiver-clr:
selector: ${SW_RECEIVER_CLR:default}
default:
receiver-profile:
selector: ${SW_RECEIVER_PROFILE:default}
default:
receiver-zabbix:
selector: ${SW_RECEIVER_ZABBIX:-}
default:
port: ${SW_RECEIVER_ZABBIX_PORT:10051}
host: ${SW_RECEIVER_ZABBIX_HOST:0.0.0.0}
activeFiles: ${SW_RECEIVER_ZABBIX_ACTIVE_FILES:agent}
service-mesh:
selector: ${SW_SERVICE_MESH:default}
default:
envoy-metric:
selector: ${SW_ENVOY_METRIC:default}
default:
acceptMetricsService: ${SW_ENVOY_METRIC_SERVICE:true}
alsHTTPAnalysis: ${SW_ENVOY_METRIC_ALS_HTTP_ANALYSIS:""}
alsTCPAnalysis: ${SW_ENVOY_METRIC_ALS_TCP_ANALYSIS:""}
# `k8sServiceNameRule` allows you to customize the service name in ALS via Kubernetes metadata,
# the available variables are `pod`, `service`, f.e., you can use `${service.metadata.name}-${pod.metadata.labels.version}`
# to append the version number to the service name.
# Be careful, when using environment variables to pass this configuration, use single quotes(`''`) to avoid it being evaluated by the shell.
k8sServiceNameRule: ${K8S_SERVICE_NAME_RULE:"${pod.metadata.labels.(service.istio.io/canonical-name)}.${pod.metadata.namespace}"}
istioServiceNameRule: ${ISTIO_SERVICE_NAME_RULE:"${serviceEntry.metadata.name}.${serviceEntry.metadata.namespace}"}
# When looking up service informations from the Istio ServiceEntries, some
# of the ServiceEntries might be created in several namespaces automatically
# by some components, and OAP will randomly pick one of them to build the
# service name, users can use this config to exclude ServiceEntries that
# they don't want to be used. Comma separated.
istioServiceEntryIgnoredNamespaces: ${SW_ISTIO_SERVICE_ENTRY_IGNORED_NAMESPACES:""}
gRPCHost: ${SW_ALS_GRPC_HOST:0.0.0.0}
gRPCPort: ${SW_ALS_GRPC_PORT:0}
maxConcurrentCallsPerConnection: ${SW_ALS_GRPC_MAX_CONCURRENT_CALL:0}
maxMessageSize: ${SW_ALS_GRPC_MAX_MESSAGE_SIZE:0}
gRPCThreadPoolSize: ${SW_ALS_GRPC_THREAD_POOL_SIZE:0}
gRPCSslEnabled: ${SW_ALS_GRPC_SSL_ENABLED:false}
gRPCSslKeyPath: ${SW_ALS_GRPC_SSL_KEY_PATH:""}
gRPCSslCertChainPath: ${SW_ALS_GRPC_SSL_CERT_CHAIN_PATH:""}
gRPCSslTrustedCAsPath: ${SW_ALS_GRPC_SSL_TRUSTED_CAS_PATH:""}
kafka-fetcher:
selector: ${SW_KAFKA_FETCHER:-}
default:
bootstrapServers: ${SW_KAFKA_FETCHER_SERVERS:localhost:9092}
namespace: ${SW_NAMESPACE:""}
partitions: ${SW_KAFKA_FETCHER_PARTITIONS:3}
replicationFactor: ${SW_KAFKA_FETCHER_PARTITIONS_FACTOR:2}
enableNativeProtoLog: ${SW_KAFKA_FETCHER_ENABLE_NATIVE_PROTO_LOG:true}
enableNativeJsonLog: ${SW_KAFKA_FETCHER_ENABLE_NATIVE_JSON_LOG:true}
consumers: ${SW_KAFKA_FETCHER_CONSUMERS:1}
kafkaHandlerThreadPoolSize: ${SW_KAFKA_HANDLER_THREAD_POOL_SIZE:-1}
kafkaHandlerThreadPoolQueueSize: ${SW_KAFKA_HANDLER_THREAD_POOL_QUEUE_SIZE:-1}
cilium-fetcher:
selector: ${SW_CILIUM_FETCHER:-}
default:
peerHost: ${SW_CILIUM_FETCHER_PEER_HOST:hubble-peer.kube-system.svc.cluster.local}
peerPort: ${SW_CILIUM_FETCHER_PEER_PORT:80}
fetchFailureRetrySecond: ${SW_CILIUM_FETCHER_FETCH_FAILURE_RETRY_SECOND:10}
sslConnection: ${SW_CILIUM_FETCHER_SSL_CONNECTION:false}
sslPrivateKeyFile: ${SW_CILIUM_FETCHER_PRIVATE_KEY_FILE_PATH:}
sslCertChainFile: ${SW_CILIUM_FETCHER_CERT_CHAIN_FILE_PATH:}
sslCaFile: ${SW_CILIUM_FETCHER_CA_FILE_PATH:}
convertClientAsServerTraffic: ${SW_CILIUM_FETCHER_CONVERT_CLIENT_AS_SERVER_TRAFFIC:true}
receiver-meter:
selector: ${SW_RECEIVER_METER:default}
default:
receiver-otel:
selector: ${SW_OTEL_RECEIVER:default}
default:
enabledHandlers: ${SW_OTEL_RECEIVER_ENABLED_HANDLERS:"otlp-metrics,otlp-logs"}
enabledOtelMetricsRules: ${SW_OTEL_RECEIVER_ENABLED_OTEL_METRICS_RULES:"apisix,nginx/*,k8s/*,istio-controlplane,vm,mysql/*,postgresql/*,oap,aws-eks/*,windows,aws-s3/*,aws-dynamodb/*,aws-gateway/*,redis/*,elasticsearch/*,rabbitmq/*,mongodb/*,kafka/*,pulsar/*,bookkeeper/*,rocketmq/*,clickhouse/*,activemq/*"}
receiver-zipkin:
selector: ${SW_RECEIVER_ZIPKIN:-}
default:
# Defines a set of span tag keys which are searchable.
# The max length of key=value should be less than 256 or will be dropped.
searchableTracesTags: ${SW_ZIPKIN_SEARCHABLE_TAG_KEYS:http.method}
# The sample rate precision is 1/10000, should be between 0 and 10000
sampleRate: ${SW_ZIPKIN_SAMPLE_RATE:10000}
## The below configs are for OAP collect zipkin trace from HTTP
enableHttpCollector: ${SW_ZIPKIN_HTTP_COLLECTOR_ENABLED:true}
restHost: ${SW_RECEIVER_ZIPKIN_REST_HOST:0.0.0.0}
restPort: ${SW_RECEIVER_ZIPKIN_REST_PORT:9411}
restContextPath: ${SW_RECEIVER_ZIPKIN_REST_CONTEXT_PATH:/}
restMaxThreads: ${SW_RECEIVER_ZIPKIN_REST_MAX_THREADS:200}
restIdleTimeOut: ${SW_RECEIVER_ZIPKIN_REST_IDLE_TIMEOUT:30000}
restAcceptQueueSize: ${SW_RECEIVER_ZIPKIN_REST_QUEUE_SIZE:0}
## The below configs are for OAP collect zipkin trace from kafka
enableKafkaCollector: ${SW_ZIPKIN_KAFKA_COLLECTOR_ENABLED:false}
kafkaBootstrapServers: ${SW_ZIPKIN_KAFKA_SERVERS:localhost:9092}
kafkaGroupId: ${SW_ZIPKIN_KAFKA_GROUP_ID:zipkin}
kafkaTopic: ${SW_ZIPKIN_KAFKA_TOPIC:zipkin}
# Kafka consumer config, JSON format as Properties. If it contains the same key with above, would override.
kafkaConsumerConfig: ${SW_ZIPKIN_KAFKA_CONSUMER_CONFIG:"{\"auto.offset.reset\":\"earliest\",\"enable.auto.commit\":true}"}
# The Count of the topic consumers
kafkaConsumers: ${SW_ZIPKIN_KAFKA_CONSUMERS:1}
kafkaHandlerThreadPoolSize: ${SW_ZIPKIN_KAFKA_HANDLER_THREAD_POOL_SIZE:-1}
kafkaHandlerThreadPoolQueueSize: ${SW_ZIPKIN_KAFKA_HANDLER_THREAD_POOL_QUEUE_SIZE:-1}
receiver-browser:
selector: ${SW_RECEIVER_BROWSER:default}
default:
# The sample rate precision is 1/10000. 10000 means 100% sample in default.
sampleRate: ${SW_RECEIVER_BROWSER_SAMPLE_RATE:10000}
receiver-log:
selector: ${SW_RECEIVER_LOG:default}
default:
query:
selector: ${SW_QUERY:graphql}
graphql:
# Enable the log testing API to test the LAL.
# NOTE: This API evaluates untrusted code on the OAP server.
# A malicious script can do significant damage (steal keys and secrets, remove files and directories, install malware, etc).
# As such, please enable this API only when you completely trust your users.
enableLogTestTool: ${SW_QUERY_GRAPHQL_ENABLE_LOG_TEST_TOOL:false}
# Maximum complexity allowed for the GraphQL query that can be used to
# abort a query if the total number of data fields queried exceeds the defined threshold.
maxQueryComplexity: ${SW_QUERY_MAX_QUERY_COMPLEXITY:3000}
# Allow user add, disable and update UI template
enableUpdateUITemplate: ${SW_ENABLE_UPDATE_UI_TEMPLATE:false}
# "On demand log" allows users to fetch Pod containers' log in real time,
# because this might expose secrets in the logs (if any), users need
# to enable this manually, and add permissions to OAP cluster role.
enableOnDemandPodLog: ${SW_ENABLE_ON_DEMAND_POD_LOG:false}
# This module is for Zipkin query API and support zipkin-lens UI
query-zipkin:
selector: ${SW_QUERY_ZIPKIN:-}
default:
# For HTTP server
restHost: ${SW_QUERY_ZIPKIN_REST_HOST:0.0.0.0}
restPort: ${SW_QUERY_ZIPKIN_REST_PORT:9412}
restContextPath: ${SW_QUERY_ZIPKIN_REST_CONTEXT_PATH:/zipkin}
restMaxThreads: ${SW_QUERY_ZIPKIN_REST_MAX_THREADS:200}
restIdleTimeOut: ${SW_QUERY_ZIPKIN_REST_IDLE_TIMEOUT:30000}
restAcceptQueueSize: ${SW_QUERY_ZIPKIN_REST_QUEUE_SIZE:0}
# Default look back for traces and autocompleteTags, 1 day in millis
lookback: ${SW_QUERY_ZIPKIN_LOOKBACK:86400000}
# The Cache-Control max-age (seconds) for serviceNames, remoteServiceNames and spanNames
namesMaxAge: ${SW_QUERY_ZIPKIN_NAMES_MAX_AGE:300}
## The below config are OAP support for zipkin-lens UI
# Default traces query max size
uiQueryLimit: ${SW_QUERY_ZIPKIN_UI_QUERY_LIMIT:10}
# Default look back on the UI for search traces, 15 minutes in millis
uiDefaultLookback: ${SW_QUERY_ZIPKIN_UI_DEFAULT_LOOKBACK:900000}
#This module is for PromQL API.
promql:
selector: ${SW_PROMQL:default}
default:
# For HTTP server
restHost: ${SW_PROMQL_REST_HOST:0.0.0.0}
restPort: ${SW_PROMQL_REST_PORT:9090}
restContextPath: ${SW_PROMQL_REST_CONTEXT_PATH:/}
restMaxThreads: ${SW_PROMQL_REST_MAX_THREADS:200}
restIdleTimeOut: ${SW_PROMQL_REST_IDLE_TIMEOUT:30000}
restAcceptQueueSize: ${SW_PROMQL_REST_QUEUE_SIZE:0}
# The below config is for the API buildInfo, set the value to mock the build info.
buildInfoVersion: ${SW_PROMQL_BUILD_INFO_VERSION:"2.45.0"}
buildInfoRevision: ${SW_PROMQL_BUILD_INFO_REVISION:""}
buildInfoBranch: ${SW_PROMQL_BUILD_INFO_BRANCH:""}
buildInfoBuildUser: ${SW_PROMQL_BUILD_INFO_BUILD_USER:""}
buildInfoBuildDate: ${SW_PROMQL_BUILD_INFO_BUILD_DATE:""}
buildInfoGoVersion: ${SW_PROMQL_BUILD_INFO_GO_VERSION:""}
#This module is for LogQL API.
logql:
selector: ${SW_LOGQL:default}
default:
# For HTTP server
restHost: ${SW_LOGQL_REST_HOST:0.0.0.0}
restPort: ${SW_LOGQL_REST_PORT:3100}
restContextPath: ${SW_LOGQL_REST_CONTEXT_PATH:/}
restMaxThreads: ${SW_LOGQL_REST_MAX_THREADS:200}
restIdleTimeOut: ${SW_LOGQL_REST_IDLE_TIMEOUT:30000}
restAcceptQueueSize: ${SW_LOGQL_REST_QUEUE_SIZE:0}
alarm:
selector: ${SW_ALARM:default}
default:
telemetry:
selector: ${SW_TELEMETRY:none}
none:
prometheus:
host: ${SW_TELEMETRY_PROMETHEUS_HOST:0.0.0.0}
port: ${SW_TELEMETRY_PROMETHEUS_PORT:1234}
sslEnabled: ${SW_TELEMETRY_PROMETHEUS_SSL_ENABLED:false}
sslKeyPath: ${SW_TELEMETRY_PROMETHEUS_SSL_KEY_PATH:""}
sslCertChainPath: ${SW_TELEMETRY_PROMETHEUS_SSL_CERT_CHAIN_PATH:""}
configuration:
selector: ${SW_CONFIGURATION:none}
none:
grpc:
host: ${SW_DCS_SERVER_HOST:""}
port: ${SW_DCS_SERVER_PORT:80}
clusterName: ${SW_DCS_CLUSTER_NAME:SkyWalking}
period: ${SW_DCS_PERIOD:20}
maxInboundMessageSize: ${SW_DCS_MAX_INBOUND_MESSAGE_SIZE:4194304}
apollo:
apolloMeta: ${SW_CONFIG_APOLLO:http://localhost:8080}
apolloCluster: ${SW_CONFIG_APOLLO_CLUSTER:default}
apolloEnv: ${SW_CONFIG_APOLLO_ENV:""}
appId: ${SW_CONFIG_APOLLO_APP_ID:skywalking}
zookeeper:
period: ${SW_CONFIG_ZK_PERIOD:60} # Unit seconds, sync period. Default fetch every 60 seconds.
namespace: ${SW_CONFIG_ZK_NAMESPACE:/default}
hostPort: ${SW_CONFIG_ZK_HOST_PORT:localhost:2181}
# Retry Policy
baseSleepTimeMs: ${SW_CONFIG_ZK_BASE_SLEEP_TIME_MS:1000} # initial amount of time to wait between retries
maxRetries: ${SW_CONFIG_ZK_MAX_RETRIES:3} # max number of times to retry
etcd:
period: ${SW_CONFIG_ETCD_PERIOD:60} # Unit seconds, sync period. Default fetch every 60 seconds.
endpoints: ${SW_CONFIG_ETCD_ENDPOINTS:http://localhost:2379}
namespace: ${SW_CONFIG_ETCD_NAMESPACE:/skywalking}
authentication: ${SW_CONFIG_ETCD_AUTHENTICATION:false}
user: ${SW_CONFIG_ETCD_USER:}
password: ${SW_CONFIG_ETCD_password:}
consul:
# Consul host and ports, separated by comma, e.g. 1.2.3.4:8500,2.3.4.5:8500
hostAndPorts: ${SW_CONFIG_CONSUL_HOST_AND_PORTS:1.2.3.4:8500}
# Sync period in seconds. Defaults to 60 seconds.
period: ${SW_CONFIG_CONSUL_PERIOD:60}
# Consul aclToken
aclToken: ${SW_CONFIG_CONSUL_ACL_TOKEN:""}
k8s-configmap:
period: ${SW_CONFIG_CONFIGMAP_PERIOD:60}
namespace: ${SW_CLUSTER_K8S_NAMESPACE:default}
labelSelector: ${SW_CLUSTER_K8S_LABEL:app=collector,release=skywalking}
nacos:
# Nacos Server Host
serverAddr: ${SW_CONFIG_NACOS_SERVER_ADDR:127.0.0.1}
# Nacos Server Port
port: ${SW_CONFIG_NACOS_SERVER_PORT:8848}
# Nacos Configuration Group
group: ${SW_CONFIG_NACOS_SERVER_GROUP:skywalking}
# Nacos Configuration namespace
namespace: ${SW_CONFIG_NACOS_SERVER_NAMESPACE:}
# Unit seconds, sync period. Default fetch every 60 seconds.
period: ${SW_CONFIG_NACOS_PERIOD:60}
# Nacos auth username
username: ${SW_CONFIG_NACOS_USERNAME:""}
password: ${SW_CONFIG_NACOS_PASSWORD:""}
# Nacos auth accessKey
accessKey: ${SW_CONFIG_NACOS_ACCESSKEY:""}
secretKey: ${SW_CONFIG_NACOS_SECRETKEY:""}
exporter:
selector: ${SW_EXPORTER:-}
default:
# gRPC exporter
enableGRPCMetrics: ${SW_EXPORTER_ENABLE_GRPC_METRICS:false}
gRPCTargetHost: ${SW_EXPORTER_GRPC_HOST:127.0.0.1}
gRPCTargetPort: ${SW_EXPORTER_GRPC_PORT:9870}
# Kafka exporter
enableKafkaTrace: ${SW_EXPORTER_ENABLE_KAFKA_TRACE:false}
enableKafkaLog: ${SW_EXPORTER_ENABLE_KAFKA_LOG:false}
kafkaBootstrapServers: ${SW_EXPORTER_KAFKA_SERVERS:localhost:9092}
# Kafka producer config, JSON format as Properties.
kafkaProducerConfig: ${SW_EXPORTER_KAFKA_PRODUCER_CONFIG:""}
kafkaTopicTrace: ${SW_EXPORTER_KAFKA_TOPIC_TRACE:skywalking-export-trace}
kafkaTopicLog: ${SW_EXPORTER_KAFKA_TOPIC_LOG:skywalking-export-log}
exportErrorStatusTraceOnly: ${SW_EXPORTER_KAFKA_TRACE_FILTER_ERROR:false}
health-checker:
selector: ${SW_HEALTH_CHECKER:-}
default:
checkIntervalSeconds: ${SW_HEALTH_CHECKER_INTERVAL_SECONDS:5}
debugging-query:
selector: ${SW_DEBUGGING_QUERY:default}
default:
# Include the list of keywords to filter configurations including secrets. Separate keywords by a comma.
keywords4MaskingSecretsOfConfig: ${SW_DEBUGGING_QUERY_KEYWORDS_FOR_MASKING_SECRETS:user,password,token,accessKey,secretKey,authentication}
configuration-discovery:
selector: ${SW_CONFIGURATION_DISCOVERY:default}
default:
disableMessageDigest: ${SW_DISABLE_MESSAGE_DIGEST:false}
receiver-event:
selector: ${SW_RECEIVER_EVENT:default}
default:
receiver-ebpf:
selector: ${SW_RECEIVER_EBPF:default}
default:
# The continuous profiling policy cache time, Unit is second.
continuousPolicyCacheTimeout: ${SW_CONTINUOUS_POLICY_CACHE_TIMEOUT:60}
gRPCHost: ${SW_EBPF_GRPC_HOST:0.0.0.0}
gRPCPort: ${SW_EBPF_GRPC_PORT:0}
maxConcurrentCallsPerConnection: ${SW_EBPF_GRPC_MAX_CONCURRENT_CALL:0}
maxMessageSize: ${SW_EBPF_ALS_GRPC_MAX_MESSAGE_SIZE:0}
gRPCThreadPoolSize: ${SW_EBPF_GRPC_THREAD_POOL_SIZE:0}
gRPCSslEnabled: ${SW_EBPF_GRPC_SSL_ENABLED:false}
gRPCSslKeyPath: ${SW_EBPF_GRPC_SSL_KEY_PATH:""}
gRPCSslCertChainPath: ${SW_EBPF_GRPC_SSL_CERT_CHAIN_PATH:""}
gRPCSslTrustedCAsPath: ${SW_EBPF_GRPC_SSL_TRUSTED_CAS_PATH:""}
receiver-telegraf:
selector: ${SW_RECEIVER_TELEGRAF:default}
default:
activeFiles: ${SW_RECEIVER_TELEGRAF_ACTIVE_FILES:vm}
aws-firehose:
selector: ${SW_RECEIVER_AWS_FIREHOSE:default}
default:
host: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_HOST:0.0.0.0}
port: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_PORT:12801}
contextPath: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_CONTEXT_PATH:/}
maxThreads: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_MAX_THREADS:200}
idleTimeOut: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_IDLE_TIME_OUT:30000}
acceptQueueSize: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_ACCEPT_QUEUE_SIZE:0}
maxRequestHeaderSize: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_MAX_REQUEST_HEADER_SIZE:8192}
firehoseAccessKey: ${SW_RECEIVER_AWS_FIREHOSE_ACCESS_KEY:}
enableTLS: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_ENABLE_TLS:false}
tlsKeyPath: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_TLS_KEY_PATH:}
tlsCertChainPath: ${SW_RECEIVER_AWS_FIREHOSE_HTTP_TLS_CERT_CHAIN_PATH:}
ai-pipeline:
selector: ${SW_AI_PIPELINE:default}
default:
uriRecognitionServerAddr: ${SW_AI_PIPELINE_URI_RECOGNITION_SERVER_ADDR:}
uriRecognitionServerPort: ${SW_AI_PIPELINE_URI_RECOGNITION_SERVER_PORT:17128}
2、log4j2.xml修改
<?xml version="1.0" encoding="UTF-8"?>
<!--
~ Licensed to the Apache Software Foundation (ASF) under one or more
~ contributor license agreements. See the NOTICE file distributed with
~ this work for additional information regarding copyright ownership.
~ The ASF licenses this file to You under the Apache License, Version 2.0
~ (the "License"); you may not use this file except in compliance with
~ the License. You may obtain a copy of the License at
~
~ http://www.apache.org/licenses/LICENSE-2.0
~
~ Unless required by applicable law or agreed to in writing, software
~ distributed under the License is distributed on an "AS IS" BASIS,
~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
~ See the License for the specific language governing permissions and
~ limitations under the License.
~
-->
<Configuration status="info">
<Properties>
<Property name="log-path">${sys:oap.logDir}</Property>
</Properties>
<Appenders>
<RollingFile name="RollingFile" fileName="${log-path}/skywalking-oap-server.log"
filePattern="${log-path}/skywalking-oap-server-%d{yyyy-MM-dd}-%i.log">
<PatternLayout>
<pattern>%d - %c - %L [%t] %-5p %x - %m%n</pattern>
</PatternLayout>
<Policies>
<SizeBasedTriggeringPolicy size="102400KB"/>
</Policies>
<DefaultRolloverStrategy max="30"/>
</RollingFile>
<Console name="Console" target="SYSTEM_OUT">
<PatternLayout>
<pattern>%m%n</pattern>
</PatternLayout>
<MarkerFilter marker="Console" onMatch="ACCEPT" onMismatch="DENY"/>
</Console>
</Appenders>
<Loggers>
<logger name="org.apache.zookeeper" level="INFO"/>
<logger name="io.grpc.netty" level="INFO"/>
<Logger name="org.apache.skywalking.oap.server.library.server.grpc.GRPCServer" level="INFO" additivity="false">
<AppenderRef ref="Console"/>
</Logger>
<Root level="info">
<AppenderRef ref="RollingFile"/>
<AppenderRef ref="Console"/>
</Root>
</Loggers>
</Configuration>
修改UI配置，D:\Temp\1\apache-skywalking-apm-bin\webapp下面
1、修改application.yml
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
serverPort: ${SW_SERVER_PORT:-8080}
# Comma seperated list of OAP addresses.
oapServices: ${SW_OAP_ADDRESS:-http://localhost:12800}
zipkinServices: ${SW_ZIPKIN_ADDRESS:-http://localhost:9412}
2、log4j2.xml修改
<?xml version="1.0" encoding="UTF-8"?>
<!--
~ Licensed to the Apache Software Foundation (ASF) under one or more
~ contributor license agreements. See the NOTICE file distributed with
~ this work for additional information regarding copyright ownership.
~ The ASF licenses this file to You under the Apache License, Version 2.0
~ (the "License"); you may not use this file except in compliance with
~ the License. You may obtain a copy of the License at
~
~ http://www.apache.org/licenses/LICENSE-2.0
~
~ Unless required by applicable law or agreed to in writing, software
~ distributed under the License is distributed on an "AS IS" BASIS,
~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
~ See the License for the specific language governing permissions and
~ limitations under the License.
~
-->
<Configuration status="info">
<Properties>
<Property name="log-path">${sys:webapp.logDir}</Property>
</Properties>
<Appenders>
<RollingFile name="RollingFile" fileName="${log-path}/skywalking-webapp.log"
filePattern="${log-path}/skywalking-webapp-%d{yyyy-MM-dd}-%i.log">
<PatternLayout>
<pattern>%d - %c - %L [%t] %-5p %x - %m%n</pattern>
</PatternLayout>
<Policies>
<SizeBasedTriggeringPolicy size="102400KB"/>
</Policies>
<DefaultRolloverStrategy max="30"/>
</RollingFile>
<Console name="Console" target="SYSTEM_OUT">
<PatternLayout>
<pattern>%m%n</pattern>
</PatternLayout>
<MarkerFilter marker="Console" onMatch="ACCEPT" onMismatch="DENY"/>
</Console>
</Appenders>
<Loggers>
<logger name="org.apache.zookeeper" level="INFO"/>
<logger name="io.grpc.netty" level="INFO"/>
<Logger name="org.apache.skywalking.oap.server.webapp.ApplicationStartUp" level="INFO" additivity="false">
<AppenderRef ref="Console"/>
</Logger>
<Root level="info">
<AppenderRef ref="RollingFile"/>
<AppenderRef ref="Console"/>
</Root>
</Loggers>
</Configuration>
注意：
skywalking服务必须放在无空格的文件夹，比如：Program Files这个文件是绝对不能放的，不然服务运行的时候只会一闪而过，连log日志都不会生成）。
默认监听 11800（gRPC）与 12800（HTTP） 端口。
上面解压后的文件内容包含 collector 与UI 2部分，
collector：负责收集日志等信息，此部分配置文件在config文件夹下 application.yml 及日志配置 log4j2.xml
UI：用于数据展示 ，此部分配置文件在 webapp 文件夹下 application.yml 及日志配置 log4j2.xml
五、启动
1、先启动D:\Temp\1\elasticsearch-8.17.0-windows-x86_64\bin下的elasticsearch，双击或者右键管理员权限运行elasticsearch.bat即可
2、先启动D:\Temp\1\apache-skywalking-apm-bin\bin下的skywalking，双击或者右键管理员权限运行startup.bat即可
切到 D:\Temp\1\apache-skywalking-apm-bin\bin，双击或者右键管理员权限运行startup.bat
浏览器打开：http://127.0.0.1:8080,成功的话会显示如下：
如果出错，
elasticsearch出错，查看D:\Temp\1\elasticsearch-8.17.0-windows-x86_64\logs，
skywalking出错，查看D:\Temp\1\apache-skywalking-apm-bin\logs日志。
参考链接：
skywalking-v10.0.1安装：https://blog.csdn.net/smdai/article/details/142479469
java 环境变量配置 参考原文链接：https://blog.csdn.net/smdai/article/details/140670008
标签：10.1,default,STORAGE,SW,RECEIVER,apache,skywalking,ES,SIZE From： https://www.cnblogs.com/1175429393wljblog/p/18672337