In VirtualBox, the network modes NAT and Bridged Adapter control how the virtual machine (VM) connects to the external network and interacts with the host system. Here's a breakdown of the differences:
1. NAT (Network Address Translation)
- How it works: The VM connects to the external network (usually the internet) through the host system. The VirtualBox software acts as a router, using NAT to translate the VM's internal IP address to the host machine's IP address. The VM cannot be accessed from the external network, and any outbound connections appear to come from the host machine.
- Pros:
- Simple: It's easy to set up and doesn't require special network configurations.
- Security: The VM is isolated from the external network, providing a layer of security since it can't be accessed directly.
- Cons:
- Limited inbound connectivity: The VM cannot accept incoming connections from outside (e.g., web servers or game servers running inside the VM will not be accessible).
- IP sharing: The VM shares the host's IP address, which could be limiting if you need to assign unique IP addresses or need specific routing.
2. Bridged Adapter
- How it works: In this mode, the VM is connected directly to the physical network through the host’s network adapter. The VM appears as if it is a separate physical device on the same network as the host. It gets its own IP address from the DHCP server (like any other physical machine on the network), and can both send and receive traffic directly from the external network.
- Pros:
- Direct access: The VM can accept inbound and outbound connections directly, making it suitable for use cases where the VM needs to be reachable from the external network.
- Unique IP: The VM gets its own IP address from the network’s DHCP server, which can be useful for running services that need to be accessed externally.
- Cons:
- Security risk: Since the VM is exposed to the external network, it may be more vulnerable to attacks, depending on its configuration.
- Complex setup: It may require more configuration, especially in a network with multiple network interfaces or complex routing.
Summary of Key Differences:
| Feature | NAT | Bridged Adapter |
|---|---|---|
| External Access | Outbound only (host IP used) | Full bidirectional (VM has own IP) |
| VM IP Address | Private, shared with host | Public, unique within the local network |
| Access to VM | VM cannot be accessed externally | VM can be accessed from other devices |
| Security | More secure (isolated VM) | Less secure (directly exposed to the network) |
| Use case | Internet browsing, testing, isolation | Running servers, connecting to LAN devices |
In short, NAT is great for most casual usage, where you don't need inbound access, and Bridged Adapter is useful when you need the VM to be a fully-fledged part of the network.
标签：network,IP,Adapter,VM,host,external,Bridged,NAT From： https://www.cnblogs.com/zhangzhihui/p/18644717