首页 > 其他分享 >驱动开发：内核无痕隐藏自身分析

驱动开发：内核无痕隐藏自身分析

时间：2022-10-25 13:02:31浏览次数：56  
标签：fffff801 return MiProcessLoaderEntry 内核 无痕 StartAddress NULL MmUnloadSystemImage

在笔者前面有一篇文章《驱动开发：断链隐藏驱动程序自身》通过摘除驱动的链表实现了断链隐藏自身的目的，但此方法恢复时会触发PG会蓝屏，偶然间在网上找到了一个作者介绍的一种方法，觉得有必要详细分析一下他是如何实现的进程隐藏的，总体来说作者的思路是最终寻找到MiProcessLoaderEntry的入口地址，该函数的作用是将驱动信息加入链表和移除链表，运用这个函数即可动态处理驱动的添加和移除问题。

  • MiProcessLoaderEntry(pDriverObject->DriverSection, 1) 添加
  • MiProcessLoaderEntry(pDriverObject->DriverSection, 0) 移除

那么如何找到MiProcessLoaderEntry函数入口地址就是下一步的目标，寻找入口可以总结为；

  • 1.寻找MmUnloadSystemImage函数地址，可通过MmGetSystemRoutineAddress函数得到。
  • 2.在MmUnloadSystemImage里面寻找MiUnloadSystemImage函数地址。
  • 3.在MiUnloadSystemImage里面继续寻找MiProcessLoaderEntry即可。

搜索MmUnloadSystemImage可定位到call nt!MiUnloadSystemImage地址。

搜索MiUnloadSystemImage定位到call nt!MiProcessLoaderEntry即得到了我们想要的。

根据前面枚举篇系列文章，定位这段特征很容易实现，如下是一段参考代码。

// PowerBy: LyShark
// Email: [email protected]

#include <ntddk.h>
#include <ntstrsafe.h>

typedef NTSTATUS(__fastcall *MiProcessLoaderEntry)(PVOID pDriverSection, BOOLEAN bLoad);

// 取出指定函数地址
PVOID GetProcAddress(WCHAR *FuncName)
{
	UNICODE_STRING u_FuncName = { 0 };
	PVOID ref = NULL;

	RtlInitUnicodeString(&u_FuncName, FuncName);
	ref = MmGetSystemRoutineAddress(&u_FuncName);

	if (ref != NULL)
	{
		return ref;
	}

	return ref;
}

// 特征定位 MiUnloadSystemImage
ULONG64 GetMiUnloadSystemImageAddress()
{
	// 在MmUnloadSystemImage函数中搜索的Code
	/*
	lyshark.com: kd> uf MmUnloadSystemImage
		fffff801`37943512 83caff          or      edx,0FFFFFFFFh
		fffff801`37943515 488bcf          mov     rcx,rdi
		fffff801`37943518 488bd8          mov     rbx,rax
		fffff801`3794351b e860b4ebff      call    nt!MiUnloadSystemImage (fffff801`377fe980)
	*/
	CHAR MmUnloadSystemImage_Code[] = "\x83\xCA\xFF"  // or      edx, 0FFFFFFFFh
		"\x48\x8B\xCF"                                // mov     rcx, rdi
		"\x48\x8B\xD8"                                // mov     rbx, rax
		"\xE8";                                       // call    nt!MiUnloadSystemImage (fffff801`377fe980)

	ULONG_PTR MmUnloadSystemImageAddress = 0;
	ULONG_PTR MiUnloadSystemImageAddress = 0;
	ULONG_PTR StartAddress = 0;

	MmUnloadSystemImageAddress = (ULONG_PTR)GetProcAddress(L"MmUnloadSystemImage");
	if (MmUnloadSystemImageAddress == 0)
	{
		return 0;
	}

	// 在MmUnloadSystemImage中搜索特征码寻找MiUnloadSystemImage
	StartAddress = MmUnloadSystemImageAddress;
	while (StartAddress < MmUnloadSystemImageAddress + 0x500)
	{
		if (memcmp((VOID*)StartAddress, MmUnloadSystemImage_Code, strlen(MmUnloadSystemImage_Code)) == 0)
		{
			// 跳过call之前的指令
			StartAddress += strlen(MmUnloadSystemImage_Code);

			// 取出 MiUnloadSystemImage地址
			MiUnloadSystemImageAddress = *(LONG*)StartAddress + StartAddress + 4;
			break;
		}
		++StartAddress;
	}

	if (MiUnloadSystemImageAddress != 0)
	{
		return MiUnloadSystemImageAddress;
	}
	return 0;
}

// 特征定位 MiProcessLoaderEntry
MiProcessLoaderEntry GetMiProcessLoaderEntry(ULONG64 StartAddress)
{
	if (StartAddress == 0)
	{
		return NULL;
	}

	while (StartAddress < StartAddress + 0x600)
	{
		// 操作数MiProcessLoaderEntry内存地址是动态变化的
		/*
		lyshark.com: kd> uf MiUnloadSystemImage
			fffff801`377fed19 33d2            xor     edx,edx
			fffff801`377fed1b 488bcb          mov     rcx,rbx
			fffff801`377fed1e e84162b4ff      call    nt!MiProcessLoaderEntry (fffff801`37344f64)
			fffff801`377fed23 8b05d756f7ff    mov     eax,dword ptr [nt!PerfGlobalGroupMask (fffff801`37774400)]
			fffff801`377fed29 a804            test    al,4
			fffff801`377fed2b 7440            je      nt!MiUnloadSystemImage+0x3ed (fffff801`377fed6d)  Branch
			E8 call | 8B 05 mov eax
		*/

		// fffff801`377fed1e   | fffff801`377fed23
		// 判断特征 0xE8(call) | 0x8B 0x05(mov eax)
		if (*(UCHAR*)StartAddress == 0xE8 && *(UCHAR *)(StartAddress + 5) == 0x8B && *(UCHAR *)(StartAddress + 6) == 0x05)
		{
			// 跳过一个字节call的E8
			StartAddress++;

			// StartAddress + 1 + 4
			return (MiProcessLoaderEntry)(*(LONG*)StartAddress + StartAddress + 4);
		}
		++StartAddress;
	}
	return NULL;
}

VOID UnDriver(PDRIVER_OBJECT driver)
{
	DbgPrint("卸载完成... \n");
}

NTSTATUS DriverEntry(IN PDRIVER_OBJECT Driver, PUNICODE_STRING RegistryPath)
{
	DbgPrint("hello lyshark.com \n");

	ULONG64 MiUnloadSystemImageAddress = GetMiUnloadSystemImageAddress();
	DbgPrint("MiUnloadSystemImageAddress = %p \n", MiUnloadSystemImageAddress);

	MiProcessLoaderEntry MiProcessLoaderEntryAddress = GetMiProcessLoaderEntry(MiUnloadSystemImageAddress);
	DbgPrint("MiProcessLoaderEntryAddress = %p \n", (ULONG64)MiProcessLoaderEntryAddress);

	Driver->DriverUnload = UnDriver;
	return STATUS_SUCCESS;
}

运行驱动程序，即可得到MiProcessLoaderEntryAddress的内存地址。

得到内存地址之后，直接破坏掉自身驱动的入口地址等，即可实现隐藏自身。

// PowerBy: LyShark
// Email: [email protected]
#include <ntddk.h>
#include <ntstrsafe.h>

typedef NTSTATUS(*NTQUERYSYSTEMINFORMATION)(
  IN ULONG SystemInformationClass,
  OUT PVOID   SystemInformation,
  IN ULONG_PTR    SystemInformationLength,
  OUT PULONG_PTR  ReturnLength OPTIONAL);

NTSYSAPI NTSTATUS NTAPI ObReferenceObjectByName(
  __in PUNICODE_STRING ObjectName,
  __in ULONG Attributes,
  __in_opt PACCESS_STATE AccessState,
  __in_opt ACCESS_MASK DesiredAccess,
  __in POBJECT_TYPE ObjectType,
  __in KPROCESSOR_MODE AccessMode,
  __inout_opt PVOID ParseContext,
  __out PVOID* Object
  );

typedef struct _SYSTEM_MODULE_INFORMATION
{
  HANDLE Section;
  PVOID MappedBase;
  PVOID Base;
  ULONG Size;
  ULONG Flags;
  USHORT LoadOrderIndex;
  USHORT InitOrderIndex;
  USHORT LoadCount;
  USHORT PathLength;
  CHAR ImageName[256];
} SYSTEM_MODULE_INFORMATION, *PSYSTEM_MODULE_INFORMATION;

typedef struct _LDR_DATA_TABLE_ENTRY
{
  LIST_ENTRY InLoadOrderLinks;
  LIST_ENTRY InMemoryOrderLinks;
  LIST_ENTRY InInitializationOrderLinks;
  PVOID      DllBase;
  PVOID      EntryPoint;
}LDR_DATA_TABLE_ENTRY, *PLDR_DATA_TABLE_ENTRY;

extern POBJECT_TYPE *IoDriverObjectType;
typedef NTSTATUS(__fastcall *MiProcessLoaderEntry)(PVOID pDriverSection, BOOLEAN bLoad);
ULONG64 MiUnloadSystemImageAddress = 0;

// 取出指定函数地址
PVOID GetProcAddress(WCHAR *FuncName)
{
	UNICODE_STRING u_FuncName = { 0 };
	PVOID ref = NULL;

	RtlInitUnicodeString(&u_FuncName, FuncName);
	ref = MmGetSystemRoutineAddress(&u_FuncName);

	if (ref != NULL)
	{
	return ref;
	}

	return ref;
}

// 特征定位 MiUnloadSystemImage
ULONG64 GetMiUnloadSystemImageAddress()
{
	CHAR MmUnloadSystemImage_Code[] = "\x83\xCA\xFF\x48\x8B\xCF\x48\x8B\xD8\xE8";

	ULONG_PTR MmUnloadSystemImageAddress = 0;
	ULONG_PTR MiUnloadSystemImageAddress = 0;
	ULONG_PTR StartAddress = 0;

	MmUnloadSystemImageAddress = (ULONG_PTR)GetProcAddress(L"MmUnloadSystemImage");
	if (MmUnloadSystemImageAddress == 0)
	{
	return 0;
	}

	// 在MmUnloadSystemImage中搜索特征码寻找MiUnloadSystemImage
	StartAddress = MmUnloadSystemImageAddress;
	while (StartAddress < MmUnloadSystemImageAddress + 0x500)
	{
	if (memcmp((VOID*)StartAddress, MmUnloadSystemImage_Code, strlen(MmUnloadSystemImage_Code)) == 0)
	{
		StartAddress += strlen(MmUnloadSystemImage_Code);
		MiUnloadSystemImageAddress = *(LONG*)StartAddress + StartAddress + 4;
		break;
	}
	++StartAddress;
	}

	if (MiUnloadSystemImageAddress != 0)
	{
	return MiUnloadSystemImageAddress;
	}
	return 0;
}

// 特征定位 MiProcessLoaderEntry
MiProcessLoaderEntry GetMiProcessLoaderEntry(ULONG64 StartAddress)
{
	if (StartAddress == 0)
	{
	return NULL;
	}

	while (StartAddress < StartAddress + 0x600)
	{
	if (*(UCHAR*)StartAddress == 0xE8 && *(UCHAR *)(StartAddress + 5) == 0x8B && *(UCHAR *)(StartAddress + 6) == 0x05)
	{
		StartAddress++;
		return (MiProcessLoaderEntry)(*(LONG*)StartAddress + StartAddress + 4);
	}
	++StartAddress;
	}
	return NULL;
}

// 根据驱动名获取驱动对象
BOOLEAN GetDriverObjectByName(PDRIVER_OBJECT *DriverObject, WCHAR *DriverName)
{
	PDRIVER_OBJECT TempObject = NULL;
	UNICODE_STRING u_DriverName = { 0 };
	NTSTATUS Status = STATUS_UNSUCCESSFUL;

	RtlInitUnicodeString(&u_DriverName, DriverName);
	Status = ObReferenceObjectByName(&u_DriverName, OBJ_CASE_INSENSITIVE, NULL, 0, *IoDriverObjectType, KernelMode, NULL, &TempObject);
	if (!NT_SUCCESS(Status))
	{
	*DriverObject = NULL;
	return FALSE;
	}

	*DriverObject = TempObject;
	return TRUE;
}

BOOLEAN SupportSEH(PDRIVER_OBJECT DriverObject)
{
	PDRIVER_OBJECT Object = NULL;;
	PLDR_DATA_TABLE_ENTRY LdrEntry = NULL;

	GetDriverObjectByName(&Object, L"\\Driver\\tdx");
	if (Object == NULL)
	{
		return FALSE;
	}

	// 将获取到的驱动对象节点赋值给自身LDR
	LdrEntry = (PLDR_DATA_TABLE_ENTRY)DriverObject->DriverSection;
	LdrEntry->DllBase = Object->DriverStart;
	ObDereferenceObject(Object);
	return TRUE;
}

VOID InitInLoadOrderLinks(PLDR_DATA_TABLE_ENTRY LdrEntry)
{
	InitializeListHead(&LdrEntry->InLoadOrderLinks);
	InitializeListHead(&LdrEntry->InMemoryOrderLinks);
}

VOID Reinitialize(PDRIVER_OBJECT DriverObject, PVOID Context, ULONG Count)
{
	MiProcessLoaderEntry m_MiProcessLoaderEntry = NULL;
	ULONG *p = NULL;

	m_MiProcessLoaderEntry = GetMiProcessLoaderEntry(MiUnloadSystemImageAddress);
	if (m_MiProcessLoaderEntry == NULL)
	{
		return;
	}

	SupportSEH(DriverObject);

	m_MiProcessLoaderEntry(DriverObject->DriverSection, 0);
	InitInLoadOrderLinks((PLDR_DATA_TABLE_ENTRY)DriverObject->DriverSection);

	// 破坏驱动对象特征
	DriverObject->DriverSection = NULL;
	DriverObject->DriverStart = NULL;
	DriverObject->DriverSize = 0;
	DriverObject->DriverUnload = NULL;
	DriverObject->DriverInit = NULL;
	DriverObject->DeviceObject = NULL;

	DbgPrint("驱动隐藏 \n");
}

VOID UnDriver(PDRIVER_OBJECT driver)
{
  DbgPrint("卸载完成... \n");
}

NTSTATUS DriverEntry(IN PDRIVER_OBJECT Driver, PUNICODE_STRING RegistryPath)
{
	DbgPrint("hello lyshark.com \n");

	MiUnloadSystemImageAddress = GetMiUnloadSystemImageAddress();
	MiProcessLoaderEntry MiProcessLoaderEntryAddress = GetMiProcessLoaderEntry(MiUnloadSystemImageAddress);

	// 无痕隐藏
	IoRegisterDriverReinitialization(Driver, Reinitialize, NULL);

	Driver->DriverUnload = UnDriver;
	return STATUS_SUCCESS;
}

运行驱动程序，让后看到如下输出信息；

参考文献

https://blog.csdn.net/zhuhuibeishadiao/article/details/75658816 https://github.com/ZhuHuiBeiShaDiao/NewHideDriverEx

标签：fffff801,return,MiProcessLoaderEntry,内核,无痕,StartAddress,NULL,MmUnloadSystemImage
From： https://blog.51cto.com/lyshark/5791095

相关文章

  • 驱动开发：内核监视LoadImage映像回调
    在笔者上一篇文章《驱动开发：内核注册并监控对象回调》介绍了如何运用ObRegisterCallbacks注册进程与线程回调，并通过该回调实现了拦截指定进行运行的效果，本章LyShark将带大......
  • 驱动开发：内核无痕隐藏自身分析
    在笔者前面有一篇文章《驱动开发：断链隐藏驱动程序自身》通过摘除驱动的链表实现了断链隐藏自身的目的，但此方法恢复时会触发PG会蓝屏，偶然间在网上找到了一个作者介绍的一种......
  • openGemini内核源码正式对外开源
    摘要：openGemini是一个开源的分布式时序数据库系统，可广泛应用于物联网、车联网、运维监控、工业互联网等业务场景，具备卓越的读写性能和高效的数据分析能力。本文分享自华为......
  • 对多分类任务中的模型评估隐藏层层数和隐藏单元个数对实验结果的影响
    8、对多分类任务中的模型评估隐藏层层数和隐藏单元个数对实验结果的影响1.确定隐藏层的层数对于一些很简单的数据集，一层甚至两层隐藏元都已经够了，隐藏层的层数不一定设置......
  • 219 . 面向对象 (上) 封装性与隐藏
    219.面向对象(上)封装性与隐藏·为什么需要封装？封装的作用和含义？我要用洗衣机，只需要按一下开关和洗涤模式就可以了。有必要了解洗衣机内部的结构吗？有必要碰电动机吗？......
  • CentOS 7 升级内核及修改默认启动内核
    CentOS7的内核升级及修改默认启动的内核，操作备档http://elrepo.org/tiki/HomePage导入公钥：rpm--import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org Toinst......
  • ubuntu系统查看内核，升级内核，删除内核，切换内核
    1.查看内核列表sudodpkg--get-selections|greplinux-image2.查看当前使用的内核uname-r3.删除内核tips：删除当前版本重启会使用低一级的已安装内核,如......
  • 驱动开发：内核注册并监控对象回调
    在笔者上一篇文章《驱动开发：内核枚举进程与线程ObCall回调》简单介绍了如何枚举系统中已经存在的进程与线程回调，本章LyShark将通过对象回调实现对进程线程的句柄监控，在内核......
  • 驱动开发：内核监控进程与线程回调
    在前面的文章中LyShark一直在重复的实现对系统底层模块的枚举，今天我们将展开一个新的话题，内核监控，我们以监控进程线程创建为例，在Win10系统中监控进程与线程可以使用微软提供......
  • 驱动开发：内核监控进程与线程回调
    在前面的文章中LyShark一直在重复的实现对系统底层模块的枚举，今天我们将展开一个新的话题，内核监控，我们以监控进程线程创建为例，在Win10系统中监控进程与线程可以使用微软提......

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99