可以将SW1的G0/0/1接口改为三层接口,也可以创建虚接口关联G0/0/1。
sys
sysn sw1
vlan batch 30 40
int g0/0/2
port link-type access
port default vlan 30
int g0/0/1
port link-type access
port default vlan 40
interface vlanif 30
ip add 23.0.0.1 24
interface vlanif 40
ip add 13.0.0.1 24
ip route-static 192.168.10.0 24 23.0.0.2
ip route-static 192.168.20.0 24 23.0.0.2
ip route-static 1.1.1.1 32 13.0.0.2
sys
sysn sw2
vlan batch 10 20 30
int g0/0/2
port link-type trunk
port trunk allow-pass vlan 10 20
int g0/0/1
port link-type access
port default vlan 30
interface vlanif 10
ip add 192.168.10.254 24
interface vlanif 20
ip add 192.168.20.254 24
interface vlanif 30
ip add 23.0.0.2 24
ip route-static 13.0.0.0 24 23.0.0.1
ip route-static 1.1.1.1 32 23.0.0.1
sys
sysn sw4
vlan batch 10 20
int e0/0/2
port link-type access
port default vlan 10
int e0/0/3
port link-type access
port default vlan 20
int e0/0/1
port link-type trunk
port trunk allow-pass vlan 10 20
sys
sysn R1
int g0/0/0
ip add 13.0.0.2 24
int loopback 0
ip add 1.1.1.1 32
ip route-static 0.0.0.0 0 13.0.0.1
标签:24,ENSP,int,Demo,vlan,add,Switch,ip,port From: https://www.cnblogs.com/zx654042919/p/18097088