AVCodec是存储编解码信息的结构体。
/**
* AVCodec.
*/
typedef struct AVCodec {
/**
* Name of the codec implementation.
* The name is globally unique among encoders and among decoders (but an
* encoder and a decoder can share the same name).
* This is the primary way to find a codec from the user perspective.
*/
const char *name;
/**
* Descriptive name for the codec, meant to be more human readable than name.
* You should use the NULL_IF_CONFIG_SMALL() macro to define it.
*/
const char *long_name;
enum AVMediaType type;
enum CodecID id;
/**
* Codec capabilities.
* see CODEC_CAP_*
*/
int capabilities;
const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
const enum PixelFormat *pix_fmts; ///< array of supported pixel formats, or NULL if unknown, array is terminated by -1
const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
const enum AVSampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
const uint64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
uint8_t max_lowres; ///< maximum value for lowres supported by the decoder
const AVClass *priv_class; ///< AVClass for the private context
const AVProfile *profiles; ///< array of recognized profiles, or NULL if unknown, array is terminated by {FF_PROFILE_UNKNOWN}
/*****************************************************************
* No fields below this line are part of the public API. They
* may not be used outside of libavcodec and can be changed and
* removed at will.
* New public fields should be added right above.
*****************************************************************
*/
int priv_data_size;
struct AVCodec *next;
/**
* @name Frame-level threading support functions
* @{
*/
/**
* If defined, called on thread contexts when they are created.
* If the codec allocates writable tables in init(), re-allocate them here.
* priv_data will be set to a copy of the original.
*/
int (*init_thread_copy)(AVCodecContext *);
/**
* Copy necessary context variables from a previous thread context to the current one.
* If not defined, the next thread will start automatically; otherwise, the codec
* must call ff_thread_finish_setup().
*
* dst and src will (rarely) point to the same context, in which case memcpy should be skipped.
*/
int (*update_thread_context)(AVCodecContext *dst, const AVCodecContext *src);
/** @} */
/**
* Private codec-specific defaults.
*/
const AVCodecDefault *defaults;
/**
* Initialize codec static data, called from avcodec_register().
*/
void (*init_static_data)(struct AVCodec *codec);
int (*init)(AVCodecContext *);
int (*encode)(AVCodecContext *, uint8_t *buf, int buf_size, void *data);
/**
* Encode data to an AVPacket.
*
* @param avctx codec context
* @param avpkt output AVPacket (may contain a user-provided buffer)
* @param[in] frame AVFrame containing the raw data to be encoded
* @param[out] got_packet_ptr encoder sets to 0 or 1 to indicate that a
* non-empty packet was returned in avpkt.
* @return 0 on success, negative error code on failure
*/
int (*encode2)(AVCodecContext *avctx, AVPacket *avpkt, const AVFrame *frame,
int *got_packet_ptr);
int (*decode)(AVCodecContext *, void *outdata, int *outdata_size, AVPacket *avpkt);
int (*close)(AVCodecContext *);
/**
* Flush buffers.
* Will be called when seeking
*/
void (*flush)(AVCodecContext *);
} AVCodec;
最主要的几个变量:
const char *name:编解码器的名字,比较短
const char *long_name:编解码器的名字,全称,比较长
enum AVMediaType type:指明了类型,是视频,音频,还是字幕
enum AVCodecID id:ID,不重复
const AVRational *supported_framerates:支持的帧率(仅视频)
const enum AVPixelFormat *pix_fmts:支持的像素格式(仅视频)
const int *supported_samplerates:支持的采样率(仅音频)
const enum AVSampleFormat *sample_fmts:支持的采样格式(仅音频)
const uint64_t *channel_layouts:支持的声道数(仅音频)
int priv_data_size:私有数据的大小
详细介绍几个变量
- enum AVMediaType type
AVMediaType定义如下:
enum AVMediaType{
AVMEDIA_TYPE_UNKNOWN =-1,//usually treated as AVMEDIA_TYPE_DATA
AVMEDIA_TYPE_VIDEO,
AVMEDIA_TYPE_AUDIO,
AVMEDIA_TYPE_DATA, //Opaque data information usually continuous
AVMEDIA_TYPE_SUBTITLE,
AVMEDIA_TYPE_ATTACHMENT,//Opaque data information usually sparse
}
- enum AVCodecID id
AVCodecID定义如下:
enum AVCodecID {
AV_CODEC_ID_NONE,
/* video codecs */
AV_CODEC_ID_MPEG1VIDEO,
AV_CODEC_ID_MPEG2VIDEO, ///< preferred ID for MPEG-1/2 video decoding
AV_CODEC_ID_MPEG2VIDEO_XVMC,
AV_CODEC_ID_H261,
AV_CODEC_ID_H263,
AV_CODEC_ID_RV10,
AV_CODEC_ID_RV20,
AV_CODEC_ID_MJPEG,
AV_CODEC_ID_MJPEGB,
AV_CODEC_ID_LJPEG,
AV_CODEC_ID_SP5X,
AV_CODEC_ID_JPEGLS,
AV_CODEC_ID_MPEG4,
AV_CODEC_ID_RAWVIDEO,
AV_CODEC_ID_MSMPEG4V1,
AV_CODEC_ID_MSMPEG4V2,
AV_CODEC_ID_MSMPEG4V3,
AV_CODEC_ID_WMV1,
AV_CODEC_ID_WMV2,
AV_CODEC_ID_H263P,
AV_CODEC_ID_H263I,
AV_CODEC_ID_FLV1,
AV_CODEC_ID_SVQ1,
AV_CODEC_ID_SVQ3,
AV_CODEC_ID_DVVIDEO,
AV_CODEC_ID_HUFFYUV,
AV_CODEC_ID_CYUV,
AV_CODEC_ID_H264,
...(代码太长,略)
}
- const enum AVPixelFormat *pix_fmts
AVPixelFormat定义如下:
enum AVPixelFormat {
AV_PIX_FMT_NONE = -1,
AV_PIX_FMT_YUV420P, ///< planar YUV 4:2:0, 12bpp, (1 Cr & Cb sample per 2x2 Y samples)
AV_PIX_FMT_YUYV422, ///< packed YUV 4:2:2, 16bpp, Y0 Cb Y1 Cr
AV_PIX_FMT_RGB24, ///< packed RGB 8:8:8, 24bpp, RGBRGB...
AV_PIX_FMT_BGR24, ///< packed RGB 8:8:8, 24bpp, BGRBGR...
AV_PIX_FMT_YUV422P, ///< planar YUV 4:2:2, 16bpp, (1 Cr & Cb sample per 2x1 Y samples)
AV_PIX_FMT_YUV444P, ///< planar YUV 4:4:4, 24bpp, (1 Cr & Cb sample per 1x1 Y samples)
AV_PIX_FMT_YUV410P, ///< planar YUV 4:1:0, 9bpp, (1 Cr & Cb sample per 4x4 Y samples)
AV_PIX_FMT_YUV411P, ///< planar YUV 4:1:1, 12bpp, (1 Cr & Cb sample per 4x1 Y samples)
AV_PIX_FMT_GRAY8, ///< Y , 8bpp
AV_PIX_FMT_MONOWHITE, ///< Y , 1bpp, 0 is white, 1 is black, in each byte pixels are ordered from the msb to the lsb
AV_PIX_FMT_MONOBLACK, ///< Y , 1bpp, 0 is black, 1 is white, in each byte pixels are ordered from the msb to the lsb
AV_PIX_FMT_PAL8, ///< 8 bit with PIX_FMT_RGB32 palette
AV_PIX_FMT_YUVJ420P, ///< planar YUV 4:2:0, 12bpp, full scale (JPEG), deprecated in favor of PIX_FMT_YUV420P and setting color_range
AV_PIX_FMT_YUVJ422P, ///< planar YUV 4:2:2, 16bpp, full scale (JPEG), deprecated in favor of PIX_FMT_YUV422P and setting color_range
AV_PIX_FMT_YUVJ444P, ///< planar YUV 4:4:4, 24bpp, full scale (JPEG), deprecated in favor of PIX_FMT_YUV444P and setting color_range
AV_PIX_FMT_XVMC_MPEG2_MC,///< XVideo Motion Acceleration via common packet passing
AV_PIX_FMT_XVMC_MPEG2_IDCT,
...(代码太长,略)
}
- const enum AVSampleFormat *sample_fmts
enum AVSampleFormat {
AV_SAMPLE_FMT_NONE = -1,
AV_SAMPLE_FMT_U8, ///< unsigned 8 bits
AV_SAMPLE_FMT_S16, ///< signed 16 bits
AV_SAMPLE_FMT_S32, ///< signed 32 bits
AV_SAMPLE_FMT_FLT, ///< float
AV_SAMPLE_FMT_DBL, ///< double
AV_SAMPLE_FMT_U8P, ///< unsigned 8 bits, planar
AV_SAMPLE_FMT_S16P, ///< signed 16 bits, planar
AV_SAMPLE_FMT_S32P, ///< signed 32 bits, planar
AV_SAMPLE_FMT_FLTP, ///< float, planar
AV_SAMPLE_FMT_DBLP, ///< double, planar
AV_SAMPLE_FMT_NB ///< Number of sample formats. DO NOT USE if linking dynamically
};
每一个编解码器对应一个该结构体,查看一下ffmpeg的源代码,我们可以看一下H.264解码器的结构体如下所示(h264.c)
AVCodec ff_h264_decoder = {
.name = "h264",
.type = AVMEDIA_TYPE_VIDEO,
.id = CODEC_ID_H264,
.priv_data_size = sizeof(H264Context),
.init = ff_h264_decode_init,
.close = ff_h264_decode_end,
.decode = decode_frame,
.capabilities = /*CODEC_CAP_DRAW_HORIZ_BAND |*/ CODEC_CAP_DR1 | CODEC_CAP_DELAY |
CODEC_CAP_SLICE_THREADS | CODEC_CAP_FRAME_THREADS,
.flush= flush_dpb,
.long_name = NULL_IF_CONFIG_SMALL("H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10"),
.init_thread_copy = ONLY_IF_THREADS_ENABLED(decode_init_thread_copy),
.update_thread_context = ONLY_IF_THREADS_ENABLED(decode_update_thread_context),
.profiles = NULL_IF_CONFIG_SMALL(profiles),
.priv_class = &h264_class,
};
JPEG2000解码器结构体(j2kdec.c)
AVCodec ff_jpeg2000_decoder = {
.name = "j2k",
.type = AVMEDIA_TYPE_VIDEO,
.id = CODEC_ID_JPEG2000,
.priv_data_size = sizeof(J2kDecoderContext),
.init = j2kdec_init,
.close = decode_end,
.decode = decode_frame,
.capabilities = CODEC_CAP_EXPERIMENTAL,
.long_name = NULL_IF_CONFIG_SMALL("JPEG 2000"),
.pix_fmts =
(const enum PixelFormat[]) {PIX_FMT_GRAY8, PIX_FMT_RGB24, PIX_FMT_NONE}
};
下面简单介绍一下遍历ffmpeg中的解码信息的方法(这些解码器以一个链表的形式存储)
- 注册所有编解码器:av_register_all();
- 声明一个AVCodec类型的指针,比如说AVCodec *first_c;
- 调用av_codec_next()函数,即可获得指向链表下一个解码器的指针,循环往复可以获得所有解码器的信息。注意,如果想要获得指向第一个解码器的指针,则需要将函数的参数设置为NULL。