配置流程：
1.带外管理配置：设备名称、http、ssh、ntp、snmp、dns、自动上传配置以备份等。
2.vlan配置：业务vlan、AP管理vlan、vrrp vlan。
3.网络配置：管理IP、hsb IP、上下联端口、路由。
4.WLAN业务配置：ssid模板、认证模板、vap模板，AP上线
5.认证配置：802.1x认证配置
6.VRRP配置
7.优化配置：漫游优化
8.验证：各ssid能否按需实现正常接入、主备备份能否正常切换、本楼层及跨楼层能否正常漫游。
详细配置步骤：
1.带外管理配置：
http server enable stelnet server enable 11593539 http secure-server server-source -i all ssh server-source all-interface ssh server-source -i all http server-source all-interface ****其余略****
2.vlan配置：
vlan 96 name Wlan_Staff vlan 101 name Guest vlan 102 name Partner vlan 103 name IOT vlan 104 name Wlan_DCIM vlan 124 name APmgmt vlan 4000 name VRRP
3.网络配置
interface Vlanif124 ip address 10.1.124.11 255.255.255.0 int vlan 4000 ip address 1.2.3.1 255.255.255.248 interface Eth-Trunk1 description to_AGG port link-type trunk undo port trunk allow-pass vlan 1 port trunk allow-pass vlan 2 to 4094 mode lacp-static interface range XGigabitEthernet0/0/1 XGigabitEthernet0/0/2 description to_AGG eth-trunk 1 interface GigabitEthernet0/0/1 description TO_AC02 port link-type trunk undo port trunk allow-pass vlan 1 port trunk allow-pass vlan 4000 stp disable ip route-static 0.0.0.0 0.0.0.0 10.1.124.1
标签：AC,vlan,WLAN,name,FIT,配置,server,trunk,port From： https://www.cnblogs.com/xinghen1216/p/17999728