思科Nexus3548密码恢复

思科nexus交换机的密码恢复与catalyst交换机的密码恢复稍有不同，个人感觉nexus交换机的密码恢复相对简单一些，下面简单说一下恢复过程。
连接好console线，接通电源，然后按ctrl+]，如下所示：

(c) Copyright 2014, Cisco Systems.
N3K-C3548P-10GX BIOS v.2.0.6, Wed 12/24/2014, 04:15 PM 
ERROR: C2:V1050007 I0 93B80003-9FB3-11D4-9A3A-0090273FC14D BE3A5018
(c) Copyright 2014, Cisco Systems.
N3K-C3548P-10GX BIOS v.2.0.6, Fri 12/26/2014
Booting kickstart image: bootflash:/n3500-uk9-kickstart.6.0.2.A7.2.bin
...............................................................................
..................................Image verification OK.

Booting kernel
[    0.000000] Fastboot Memory at 0c100000 of size 201326592
]^]^]^]]]]]]^]Usage: init 0123^]POST INIT Starts at Fri Feb 23 05:42:33 UTC 2018
^]^]^]^]]Starting Nexus 3500 Platform POST.....
  Executing Mod 1 1 SEEPROM Test:...done (0 seconds)
  Executing Mod 1 1 GigE Port Test:.]]]]]]]]]]^]^]^]^]^]]]]^]^]^]^]]]]]]]^]^]^]^]]]]]]^]^]^]done (8 seconds)
  Executing Mod 1 1 PCIE Test:.................done (0 seconds)
  Mod 1 1 Post Completed Successfully
POST is completed
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]].]].]]].]]]]]]r. done. 
上面红色的部分都是我按ctrl+]时出现的，没有关系。
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
^]]]]Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2016, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php

switch(boot)# 当你看到交换机进入到(boot)#模式时，恢复工作基本上就要完成了。

switch(boot)# conf t

switch(boot)(config)# admin-password cisco@1234  修改admin的密码为cisco@1234

WARNING! Enabling local authentication for login through console due to password recovery

switch(boot)(config)# exit

switch(boot)# dir

4096  Jan 01 2001 00:01:42  .patch/
          0  Jan 01 2001 00:02:33  20010101_000233_poap_3976_init.log
          0  Jan 27 2018 05:09:48  20180127_050948_poap_3996_init.log
          0  Jan 27 2018 05:18:36  20180127_051836_poap_3996_init.log
        627  Nov 18 2016 14:15:16  license_FOC2043R0MB_15_1.lic
       4096  Nov 18 2016 14:25:17  lost+found/
   36825088  Nov 18 2016 14:09:09  n3500-uk9-kickstart.6.0.2.A7.2.bin
  181796339  Nov 18 2016 14:09:31  n3500-uk9.6.0.2.A7.2.bin
       1024  Jan 01 2001 00:01:30  sprom_cstruct_2_0_0
       1024  Jan 01 2001 00:02:12  sprom_cstruct_3_0_0
       4096  Jan 01 2001 00:01:40  vdc_2/
       4096  Jan 01 2001 00:01:40  vdc_3/
       4096  Jan 01 2001 00:01:40  vdc_4/
       4096  Jan 01 2001 00:01:43  virtual-instance/

Usage for bootflash: filesystem 
          0 bytes used
 2147483647 bytes free
 2147483647 bytes total

switch(boot)# load n3500-uk9.6.0.2.A7.2.bin  重新引导系统

Loading System Software Fri Feb 23 05:46:18 UTC 2018
System Software(/bootflash/n3500-uk9.6.0.2.A7.2.bin) Loaded Fri Feb 23 05:46:36 UTC 2018
ethernet switching mode
INIT: Switching to runlevel: 3
INIT: Sending processes the TERM signal
INIT: (boot)# 
Mounting other filesystems:  [OK]
User Access Verification
WYLZ-NX3548 login: admin
Password:

可以使用修改过的密码登录了，到这里恢复工作已经完成了。

说明：

1、开机按ctrl+]时，不停地按，否则有可能跳过(boot)#模式。

2、思科MDS交换机的密码恢复与Nexus的密码恢复几乎相同，过程可供参考。

Nexus3548密码恢复文档的链接没有找到，下面附一个MDS交换机密码恢复的文档链接

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/security/nx-os/sec_cli_6-x.pdf?dtid=osscdc000283

在文档的第[6-70]页。MDS的会了Nexus也就会了。