首页 > 其他分享 >esp32浅试lvgl

esp32浅试lvgl

时间:2022-08-17 02:00:43浏览次数:90  
标签:disp LV esp32 label drv lv slider 浅试 lvgl

lvgl这里就不介绍了    轻量又漂亮的嵌入式gui   这里用最简单步骤跑一个例程

第一步先确保tft-espi可以跑 屏幕正常显示触摸正常

第二部  导入lv-arduino库    这个库虽然不怎么更新了  但是啥都不用配置

第三步     跑例程   库里第一个可以直接跑     第二个需要整合下   我整理的程序是这样

#include <lvgl.h>
#include <TFT_eSPI.h>
//Ticker tick; /* timer for interrupt handler */
//代码滴答; /* 中断处理程序定时器 */
#define LVGL_TICK_PERIOD 60


TFT_eSPI tft = TFT_eSPI(); /* TFT instance 显示驱动实例化*/
static lv_disp_buf_t disp_buf;
static lv_color_t buf[LV_HOR_RES_MAX * 10];

lv_obj_t * slider_label;
int screenWidth = 480;
int screenHeight = 320;
  
#if USE_LV_LOG != 0
/* Serial debugging 串口debug*/
void my_print(lv_log_level_t level, const char * file, uint32_t line, const char * dsc)
{

  Serial.printf("%s@%d->%s\r\n", file, line, dsc);
  delay(100);
}
#endif

/* Display flushing 显示内容填充*/
void my_disp_flush(lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p)
{
  uint16_t c;

  tft.startWrite(); /* Start new TFT transaction 开始新事务*/
  tft.setAddrWindow(area->x1, area->y1, (area->x2 - area->x1 + 1), (area->y2 - area->y1 + 1)); /* set the working window 设置工作窗口*/
  for (int y = area->y1; y <= area->y2; y++) {
    for (int x = area->x1; x <= area->x2; x++) {
      c = color_p->full;
      tft.writeColor(c, 1);
      color_p++;
    }
  }
  tft.endWrite(); /* terminate TFT transaction 结束事务*/
  lv_disp_flush_ready(disp); /* tell lvgl that flushing is done 告知填充结束*/
}

bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data)
{
    uint16_t touchX, touchY;

    bool touched = tft.getTouch(&touchX, &touchY, 600);

    if(!touched)
    {
      return false;
    }

    if(touchX>screenWidth || touchY > screenHeight)
    {
      Serial.println("Y or y outside of expected parameters..");
      Serial.print("y:");
      Serial.print(touchX);
      Serial.print(" x:");
      Serial.print(touchY);
    }
    else
    {

      data->state = touched ? LV_INDEV_STATE_PR : LV_INDEV_STATE_REL; 
  
      /*Save the state and save the pressed coordinate*/
      //if(data->state == LV_INDEV_STATE_PR) touchpad_get_xy(&last_x, &last_y);
     
      /*Set the coordinates (if released use the last pressed coordinates)*/
      /*保存状态并保存按下的坐标*/
       //if(data->state == LV_INDEV_STATE_PR) touchpad_get_xy(&last_x, &last_y);
     
       /*设置坐标(如果松开使用最后按下的坐标)*/
      data->point.x = touchX;
      data->point.y = touchY;
  
      Serial.print("Data x");
      Serial.println(touchX);
      
      Serial.print("Data y");
      Serial.println(touchY);

    }

    return false; /*Return `false` because we are not buffering and no more data to read返回 `false` 因为我们没有缓冲并且没有更多数据要读取*/
}

void printEvent(String Event, lv_event_t event)
{
  
  Serial.print(Event);
  printf(" ");

  switch(event) {
      case LV_EVENT_PRESSED:
          printf("Pressed\n");
          break;

      case LV_EVENT_SHORT_CLICKED:
          printf("Short clicked\n");
          break;

      case LV_EVENT_CLICKED:
          printf("Clicked\n");
          break;

      case LV_EVENT_LONG_PRESSED:
          printf("Long press\n");
          break;

      case LV_EVENT_LONG_PRESSED_REPEAT:
          printf("Long press repeat\n");
          break;

      case LV_EVENT_RELEASED:
          printf("Released\n");
          break;
  }
}

  void slider_event_cb(lv_obj_t * slider, lv_event_t event)
{

  printEvent("Slider", event);

  if(event == LV_EVENT_VALUE_CHANGED) {
      static char buf[4];                                 /* max 3 bytes  for number plus 1 null terminating byte 数字最多 3 个字节加上 1 个空终止字节*/
      snprintf(buf, 4, "%u", lv_slider_get_value(slider));
      lv_label_set_text(slider_label, buf);               /*Refresh the text刷新文字*/
  }
}



void setup() {



  Serial.begin(9600); /* prepare for possible serial debug 为可能的串行调试做准备*/

  lv_init();

  #if USE_LV_LOG != 0
    lv_log_register_print_cb(my_print); /* register print function for debugging 注册打印功能以进行调试*/
  #endif

  tft.begin(); /* TFT init tft初始化*/
  tft.setRotation(1);

  uint16_t calData[5] = { 275, 3620, 264, 3532, 1 };
  tft.setTouch(calData);

  lv_disp_buf_init(&disp_buf, buf, NULL, LV_HOR_RES_MAX * 10);

  /*Initialize the display初始化显示*/
  lv_disp_drv_t disp_drv;
  lv_disp_drv_init(&disp_drv);
  disp_drv.hor_res = screenWidth;
  disp_drv.ver_res = screenHeight;
  disp_drv.flush_cb = my_disp_flush;
  disp_drv.buffer = &disp_buf;
  lv_disp_drv_register(&disp_drv);

  /*Initialize the input device driver初始化输入设备*/
  lv_indev_drv_t indev_drv;
  lv_indev_drv_init(&indev_drv);             /*Descriptor of a input device driver输入设备驱动器的描述符*/
  indev_drv.type = LV_INDEV_TYPE_POINTER;    /*Touch pad is a pointer-like device触摸板是一种类似指针的设备*/
  indev_drv.read_cb = my_touchpad_read;      /*Set your driver function设置您的驱动程序功能*/
  lv_indev_drv_register(&indev_drv);         /*Finally register the driver最终注册驱动*/

  //Set the theme..设置主题
  lv_theme_t * th = lv_theme_material_init(LV_THEME_DEFAULT_COLOR_PRIMARY, LV_THEME_DEFAULT_COLOR_SECONDARY, LV_THEME_DEFAULT_FLAG, LV_THEME_DEFAULT_FONT_SMALL , LV_THEME_DEFAULT_FONT_NORMAL, LV_THEME_DEFAULT_FONT_SUBTITLE, LV_THEME_DEFAULT_FONT_TITLE);     
  lv_theme_set_act(th);

  lv_obj_t * scr = lv_cont_create(NULL, NULL);
  lv_disp_load_scr(scr);

  //lv_obj_t * tv = lv_tabview_create(scr, NULL);
  //lv_obj_set_size(tv, lv_disp_get_hor_res(NULL), lv_disp_get_ver_res(NULL));

  /* Create simple label创建label */
  lv_obj_t *label = lv_label_create(lv_scr_act(), NULL);
  lv_label_set_text(label, "Hello Arduino! (V7.0)");
  lv_obj_align(label, NULL, LV_ALIGN_CENTER, 0, -50);

  /* Create a slider in the center of the display 创建silder*/
  lv_obj_t * slider = lv_slider_create(lv_scr_act(), NULL);
  lv_obj_set_width(slider, screenWidth-50);                        /*Set the width*/
  lv_obj_set_height(slider, 50);
  lv_obj_align(slider, NULL, LV_ALIGN_CENTER, 0, 0);    /*Align to the center of the parent (screen)与父组件居中对齐*/
  lv_obj_set_event_cb(slider, slider_event_cb);         /*Assign an event function注册事件*/

  /* Create a label below the slider slider下创建一个label*/
  slider_label = lv_label_create(lv_scr_act(), NULL);
  lv_label_set_text(slider_label, "0");
  lv_obj_set_auto_realign(slider, true);
  lv_obj_align(slider_label, slider, LV_ALIGN_OUT_BOTTOM_MID, 0, 10);





}
void loop() {

  lv_task_handler(); /* let the GUI do its work gui开始工作*/
  
}
    

 

实际效果  7.69 bAT:/ lvgl示例# esp32 # 单片机开发 https://v.douyin.com/jU7TwcS/ 复制此链接,打开Dou音搜索,直接观看视频!

标签:disp,LV,esp32,label,drv,lv,slider,浅试,lvgl
From: https://www.cnblogs.com/kyo413/p/16593544.html

相关文章