问题描述
硬盘通过RAID（raid驱动为megaraid）方式挂载至系统。 修改块设备sdb的预读参数（read_ahead_kb），使用dd命令向块设备写数据，预读参数发生了变化。
问题总结
预读参数改变的原因是由于systemd-udevd服务对sd块设备做了IO监听，一旦发生写操作，就会触发on_inotify处理函数重新获取分区信息，重新获取分区信息时会重置预读参数(sd_revalidate_disk函数中重置了预读参数)。修复sd_revalidate_disk函数修改预读参数的规则，可以修复该问题。
问题分析
客户反馈：UOS 1032正常、UOS1040异常、麒麟25.2异常，但三者raid驱动版本一致。
根据客户反馈加上预读参数本身与raid驱动无明显关联，排除raid驱动问题。 当前验证思路，先确认预读参数是由谁（内核模块、上层应用）修改的。
上层应用 手动修改预读参数后，去掉预读参数写权限chmod 444 ，预读参数发生变化，排除上层应用主动修改预读参数。 内核模块 定位预读参数read_ahead_kb的位置
static struct queue_sysfs_entry queue_ra_entry = {
.attr = {.name = "read_ahead_kb", .mode = 0644 },
.show = queue_ra_show,
.store = queue_ra_store,
};
static ssize_t
queue_ra_store(struct request_queue *q, const char *page, size_t count)
{
unsigned long ra_kb;
ssize_t ret = queue_var_store(&ra_kb, page, count);
if (ret < 0)
return ret;
q->backing_dev_info->ra_pages = ra_kb >> (PAGE_SHIFT - 10);
return ret;
}
预读参数保存在q->backing_dev_info->ra_pages中，向相关位置添加调试信息，定位改动原因。
通过调试信息可知sd_revalidate_disk函数修改了预读参数。
static int sd_revalidate_disk(struct gendisk *disk)
{
... ...
q->backing_dev_info->ra_pages = max_t(unsigned long, VM_MAX_READAHEAD,
ra_kb) * 1024 / PAGE_SIZE;
set_capacity(disk, logical_to_sectors(sdp, sdkp->capacity));
sd_config_write_same(sdkp);
kfree(buffer);
out:
return 0;
}
查看堆栈信息发现sd_revalidate_disk是通过系统调用运行的（el0_svc为用户态系统调用的入口）
Dec 8 13:13:32 localhost kernel: [ 352.426379] CPU: 79 PID: 1739 Comm: systemd-udevd Not tainted 4.19.90-25.2.v2101.gfb012.ky10.aarch64 #1
Dec 8 13:13:32 localhost kernel: [ 352.436164] Hardware name: Unisyue Technologies Co., Ltd. UNIS Server R3810 G5/RS41M2C9S, BIOS KL4.1.60 12/02/2021
Dec 8 13:13:32 localhost kernel: [ 352.446896] Call trace:
Dec 8 13:13:32 localhost kernel: [ 352.449777] dump_backtrace+0x0/0x170
Dec 8 13:13:32 localhost kernel: [ 352.453856] show_stack+0x24/0x30
Dec 8 13:13:32 localhost kernel: [ 352.457598] dump_stack+0xa4/0xe8
Dec 8 13:13:32 localhost kernel: [ 352.461338] sd_revalidate_disk+0x3a4/0x1300
Dec 8 13:13:32 localhost kernel: [ 352.466026] rescan_partitions+0xac/0x3b8
Dec 8 13:13:32 localhost kernel: [ 352.470451] __blkdev_reread_part+0x60/0x88
Dec 8 13:13:32 localhost kernel: [ 352.475048] blkdev_reread_part+0x2c/0x48
Dec 8 13:13:32 localhost kernel: [ 352.479472] blkdev_ioctl+0x498/0xb88
Dec 8 13:13:32 localhost kernel: [ 352.483556] block_ioctl+0x50/0x68
Dec 8 13:13:32 localhost kernel: [ 352.487376] do_vfs_ioctl+0xb0/0x898
Dec 8 13:13:32 localhost kernel: [ 352.491366] ksys_ioctl+0x8c/0xa0
Dec 8 13:13:32 localhost kernel: [ 352.495099] __arm64_sys_ioctl+0x28/0x98
Dec 8 13:13:32 localhost kernel: [ 352.499439] el0_svc_common+0x78/0x130
Dec 8 13:13:32 localhost kernel: [ 352.503603] el0_svc_handler+0x38/0x78
Dec 8 13:13:32 localhost kernel: [ 352.507768] el0_svc+0x8/0x1b0
Comm显示具体应用为systemd-udevd
查阅systemd-udevd源码，发现systemd-udev对sd块设备做了IO监听，一旦发生写操作，就会触发on_inotify处理函数重新获取分区信息。 BLKRRPART:重新读取分区表 on_inotify函数调用链为：on_inotify-->synthesize_change-->ioctl(fd, BLKRRPART, 0)
udevd.c:
static int synthesize_change(sd_device *dev) {
... ...
if (streq_ptr("block", subsystem) &&
streq_ptr("disk", devtype) &&
!startswith(sysname, "dm-")) {
_cleanup_(sd_device_enumerator_unrefp) sd_device_enumerator *e = NULL;
bool part_table_read = false, has_partitions = false;
sd_device *d;
int fd;
fd = open(devname, O_RDONLY|O_CLOEXEC|O_NOFOLLOW|O_NONBLOCK);
if (fd >= 0) {
r = flock(fd, LOCK_EX|LOCK_NB);
if (r >= 0)
r = ioctl(fd, BLKRRPART, 0);
close(fd);
if (r >= 0)
part_table_read = true;
}
... ...
}
static int on_inotify(sd_event_source *s, int fd, uint32_t revents, void *userdata) {
... ...
FOREACH_INOTIFY_EVENT(e, buffer, l) {
_cleanup_(sd_device_unrefp) sd_device *dev = NULL;
const char *devnode;
if (udev_watch_lookup(e->wd, &dev) <= 0)
continue;
if (sd_device_get_devname(dev, &devnode) < 0)
continue;
log_device_debug(dev, "Inotify event: %x for %s", e->mask, devnode);
if (e->mask & IN_CLOSE_WRITE)
synthesize_change(dev);
else if (e->mask & IN_IGNORED)
udev_watch_end(dev);
}
return 1;
}
static int main_loop(Manager *manager) {
... ...
r = sd_event_add_io(manager->event, &manager->inotify_event, manager->fd_inotify, EPOLLIN, on_inotify, manager);
if (r < 0)
return log_error_errno(r, "Failed to create inotify event source: %m");
... ...
}
继续跟踪sd_revalidate_disk的历史提交记录发现，ra_pages的修改是在64cf457219acf8e3524530af064784f5677682fe版本中提交的，目的是采用硬盘VPD信息的OPTIMAL TRANSFER LENGTH（最优传输长度)来调整read_ahead_kb。
导致问题的补丁
对sd_revalidate_disk函数进行历史追溯，发现修改预读参数的功能是在64cf457219acf8e3524530af064784f5677682fe中提交的
From 64cf457219acf8e3524530af064784f5677682fe Mon Sep 17 00:00:00 2001
From: huhai <[email protected]>
Date: Tue, 3 Mar 2020 16:17:42 +0800
Subject: [PATCH] KYLIN: block/sd: incrase read_ahead_kb for FC-SAN
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
使用硬盘VPD信息的OPTIMAL TRANSFER LENGTH（最优传输长度)来调整read_ahead_kb
Signed-off-by: huhai <[email protected]>
Signed-off-by: Jackie Liu <[email protected]>
---
drivers/scsi/sd.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index f9d02f638c43..88958c7e5330 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3130,7 +3130,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
struct request_queue *q = sdkp->disk->queue;
sector_t old_capacity = sdkp->capacity;
unsigned char *buffer;
- unsigned int dev_max, rw_max;
+ unsigned int dev_max, rw_max, ra_kb;
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
"sd_revalidate_disk\n"));
@@ -3199,9 +3199,12 @@ static int sd_revalidate_disk(struct gendisk *disk)
if (sd_validate_opt_xfer_size(sdkp, dev_max)) {
q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
- } else
+ ra_kb = sdkp->opt_xfer_blocks;
+ } else {
rw_max = min_not_zero(logical_to_sectors(sdp, dev_max),
(sector_t)BLK_DEF_MAX_SECTORS);
+ ra_kb = VM_MAX_READAHEAD;
+ }
/* Do not exceed controller limit */
rw_max = min(rw_max, queue_max_hw_sectors(q));
@@ -3217,6 +3220,8 @@ static int sd_revalidate_disk(struct gendisk *disk)
sdkp->first_scan = 0;
+ q->backing_dev_info->ra_pages = max_t(unsigned long, VM_MAX_READAHEAD,
+ ra_kb) * 1024 / PAGE_SIZE;
set_capacity(disk, logical_to_sectors(sdp, sdkp->capacity));
sd_config_write_same(sdkp);
kfree(buffer);
--
2.23.0
解决方案
修改内核代码，硬盘初始化，首次进行扫描时配置最佳预读参数，之后重读分区信息时不再修改预读参数。
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 7914f304255d..8e9d9d3065df 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3235,10 +3235,11 @@ static int sd_revalidate_disk(struct gendisk *disk)
q->limits.max_sectors > q->limits.max_hw_sectors)
q->limits.max_sectors = rw_max;
- sdkp->first_scan = 0;
+ if (sdkp->first_scan)
+ q->backing_dev_info->ra_pages = max_t(unsigned long, VM_MAX_READAHEAD,
+ ra_kb) * 1024 / PAGE_SIZE;
- q->backing_dev_info->ra_pages = max_t(unsigned long, VM_MAX_READAHEAD,
- ra_kb) * 1024 / PAGE_SIZE;
+ sdkp->first_scan = 0;
set_capacity(disk, logical_to_sectors(sdp, sdkp->capacity));
sd_config_write_same(sdkp);
kfree(buffer);
--
2.23.0