首页 > 其他分享 >flock函数的锁文件的结构体

flock函数的锁文件的结构体

时间:2023-04-15 22:56:01浏览次数:29  
标签:__ 文件 函数 fcntl SYNC endif ifndef flock define

/usr/include/asm-generic/fcntl.h

root@SHPD18F-SP01:/home/sftp_root/tmp# cat /usr/include/asm-generic/fcntl.h 
#ifndef _ASM_GENERIC_FCNTL_H
#define _ASM_GENERIC_FCNTL_H

#include <linux/types.h>

/*
 * FMODE_EXEC is 0x20
 * FMODE_NONOTIFY is 0x1000000
 * These cannot be used by userspace O_* until internal and external open
 * flags are split.
 * -Eric Paris
 */

/*
 * When introducing new O_* bits, please check its uniqueness in fcntl_init().
 */

#define O_ACCMODE       00000003
#define O_RDONLY        00000000
#define O_WRONLY        00000001
#define O_RDWR          00000002
#ifndef O_CREAT
#define O_CREAT         00000100        /* not fcntl */
#endif
#ifndef O_EXCL
#define O_EXCL          00000200        /* not fcntl */
#endif
#ifndef O_NOCTTY
#define O_NOCTTY        00000400        /* not fcntl */
#endif
#ifndef O_TRUNC
#define O_TRUNC         00001000        /* not fcntl */
#endif
#ifndef O_APPEND
#define O_APPEND        00002000
#endif
#ifndef O_NONBLOCK
#define O_NONBLOCK      00004000
#endif
#ifndef O_DSYNC
#define O_DSYNC         00010000        /* used to be O_SYNC, see below */
#endif
#ifndef FASYNC
#define FASYNC          00020000        /* fcntl, for BSD compatibility */
#endif
#ifndef O_DIRECT
#define O_DIRECT        00040000        /* direct disk access hint */
#endif
#ifndef O_LARGEFILE
#define O_LARGEFILE     00100000
#endif
#ifndef O_DIRECTORY
#define O_DIRECTORY     00200000        /* must be a directory */
#endif
#ifndef O_NOFOLLOW
#define O_NOFOLLOW      00400000        /* don't follow links */
#endif
#ifndef O_NOATIME
#define O_NOATIME       01000000
#endif
#ifndef O_CLOEXEC
#define O_CLOEXEC       02000000        /* set close_on_exec */
#endif

/*
 * Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using
 * the O_SYNC flag.  We continue to use the existing numerical value
 * for O_DSYNC semantics now, but using the correct symbolic name for it.
 * This new value is used to request true Posix O_SYNC semantics.  It is
 * defined in this strange way to make sure applications compiled against
 * new headers get at least O_DSYNC semantics on older kernels.
 *
 * This has the nice side-effect that we can simply test for O_DSYNC
 * wherever we do not care if O_DSYNC or O_SYNC is used.
 *
 * Note: __O_SYNC must never be used directly.
 */
#ifndef O_SYNC
#define __O_SYNC        04000000
#define O_SYNC          (__O_SYNC|O_DSYNC)
#endif

#ifndef O_PATH
#define O_PATH          010000000
#endif

#ifndef __O_TMPFILE
#define __O_TMPFILE     020000000
#endif

/* a horrid kludge trying to make sure that this will fail on old kernels */
#define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)      

#ifndef O_NDELAY
#define O_NDELAY        O_NONBLOCK
#endif

#define F_DUPFD         0       /* dup */
#define F_GETFD         1       /* get close_on_exec */
#define F_SETFD         2       /* set/clear close_on_exec */
#define F_GETFL         3       /* get file->f_flags */
#define F_SETFL         4       /* set file->f_flags */
#ifndef F_GETLK
#define F_GETLK         5
#define F_SETLK         6
#define F_SETLKW        7
#endif
#ifndef F_SETOWN
#define F_SETOWN        8       /* for sockets. */
#define F_GETOWN        9       /* for sockets. */
#endif
#ifndef F_SETSIG
#define F_SETSIG        10      /* for sockets. */
#define F_GETSIG        11      /* for sockets. */
#endif

#ifndef CONFIG_64BIT
#ifndef F_GETLK64
#define F_GETLK64       12      /*  using 'struct flock64' */
#define F_SETLK64       13
#define F_SETLKW64      14
#endif
#endif

#ifndef F_SETOWN_EX
#define F_SETOWN_EX     15
#define F_GETOWN_EX     16
#endif

#ifndef F_GETOWNER_UIDS
#define F_GETOWNER_UIDS 17
#endif

#define F_OWNER_TID     0
#define F_OWNER_PID     1
#define F_OWNER_PGRP    2

struct f_owner_ex {
        int     type;
        __kernel_pid_t  pid;
};

/* for F_[GET|SET]FL */
#define FD_CLOEXEC      1       /* actually anything with low bit set goes */

/* for posix fcntl() and lockf() */
#ifndef F_RDLCK
#define F_RDLCK         0
#define F_WRLCK         1
#define F_UNLCK         2
#endif

/* for old implementation of bsd flock () */
#ifndef F_EXLCK
#define F_EXLCK         4       /* or 3 */
#define F_SHLCK         8       /* or 4 */
#endif

/* operations for bsd flock(), also used by the kernel implementation */
#define LOCK_SH         1       /* shared lock */
#define LOCK_EX         2       /* exclusive lock */
#define LOCK_NB         4       /* or'd with one of the above to prevent
                                   blocking */
#define LOCK_UN         8       /* remove lock */

#define LOCK_MAND       32      /* This is a mandatory flock ... */
#define LOCK_READ       64      /* which allows concurrent read operations */
#define LOCK_WRITE      128     /* which allows concurrent write operations */
#define LOCK_RW         192     /* which allows concurrent read & write ops */

#define F_LINUX_SPECIFIC_BASE   1024

#ifndef HAVE_ARCH_STRUCT_FLOCK
#ifndef __ARCH_FLOCK_PAD
#define __ARCH_FLOCK_PAD
#endif

struct flock {
        short   l_type;
        short   l_whence;
        __kernel_off_t  l_start;
        __kernel_off_t  l_len;
        __kernel_pid_t  l_pid;
        __ARCH_FLOCK_PAD
};
#endif

#ifndef CONFIG_64BIT

#ifndef HAVE_ARCH_STRUCT_FLOCK64
#ifndef __ARCH_FLOCK64_PAD
#define __ARCH_FLOCK64_PAD
#endif

struct flock64 {
        short  l_type;
        short  l_whence;
        __kernel_loff_t l_start;
        __kernel_loff_t l_len;
        __kernel_pid_t  l_pid;
        __ARCH_FLOCK64_PAD
};
#endif
#endif /* !CONFIG_64BIT */

#endif /* _ASM_GENERIC_FCNTL_H */

 

标签:__,文件,函数,fcntl,SYNC,endif,ifndef,flock,define
From: https://www.cnblogs.com/miwaiwai/p/17322160.html

相关文章

  • spring boot配置文件 yml
     在SpringBoot项目中我们有着默认的配置文件application.properties或者是是application.yml,可以进行封装出来的属性进行配置。有的时候我们需要根据不同的环境进行不同的配置。这里SpringBoot也提供了Spring.profiles.active来进行我们不同环境配置的选择,如application-{profi......
  • [vba]-Excel-VBA操作文件四大方法之四(转)
     四、利用API函数来处理文件通过前面三种方法的介绍,你是否已经觉得足够了?是的,前面的方法完全可以应付几乎所有的文件操作。但是为了普及一下API,展示一下API的魅力,最后向大家介绍一下如何利用API函数来处理文件。另一方面也是本人对API情有独钟,为她做一下广告,呵呵。大家......
  • [vba]-Excel-VBA操作文件四大方法之三(转)
    三、利用FileSystemObject对象来处理文件FileSystemObject对象模型,是微软提供的专门用来访问计算机文件系统的,具有大量的属性、方法和事件。其使用面向对象的“object.method”语法来处理文件夹和文件,使用起来十分方便(需Office2000以后版本)。FileSystemObject并不是VBA的一部......
  • [vba]-Excel-VBA操作文件四大方法之二(转)
    二、利用VBA文件处理语句来处理文件   VBA包含了许多用于文件操作的语句和函数,可以满足绝大多数情况下的文件操作要求。下面我们按照操作目的进行一一介绍。(一)文件处理   1.Name语句语法:NameoldpathnameAsnewpathname功能:重命名一个文件、目录、或文件夹,移动一......
  • [vba]-Excel-VBA操作文件四大方法之一(转)
    在我们日常使用Excel的时候,不仅会用到当前Excel文件的数据,还经常需要访问其他的数据文件。这些数据文件可能是Excel文件、文本文件或数据库文件等。经常有朋友会问如何在vba代码里操作这些数据文件?本文就系统地介绍一下在Excel中应用VBA操作数据文件的方法。本文主要介绍四种常......
  • 文件系统
    文件系统是操作系统明确文件在储存设备上的组织方法。即怎样组织文件,将其存入储存设备中。所以不同的组织方式,就有不同的文件系统。如常见的文件系统有FAT、EXT1/2/3、NTFS 分区:分区是指将硬盘中的一个整体空间划分为多个相互独立的分区,以便管理或提高其效率。windo......
  • C++中的虚函数表实现机制——对于虚表的内存布局讲解得非常好
    C++中的虚函数表实现机制摘自:https://blog.twofei.com/496/前言大家都应该知道C++的精髓是虚函数吧?虚函数带来的好处就是:可以定义一个基类的指针,其指向一个继承类,当通过基类的指针去调用函数时,可以在运行时决定该调用基类的函数还是继承类的函数.虚函数是实现多态(......
  • coc-settings中设置自定义头文件路径
    具体方案例如{"suggest.noselect":true,"languageserver":{"ccls":{"command":"ccls","filetypes":["cc","c","cpp","cuda"]......
  • redis 数据重定向到文件方便查看
    背景:其实吧,就是因为每次都要一串命令进去redis敲,觉得很不方便,所以就用命令什么来生成个文本什么的,这样方便也省事啊,话不多说,直接上命令了,比如我现在最想要看的就是这个redis连过来的那堆ip的一些客户端信息啥的,直接就echo 这个值放进导成文本echo"clientlist"|/home/redis/red......
  • powershell下哪个才能正确的安装exe文件?
    Start-Process-FilePath"D:\360Downloads\software\WPS-Office_11.1.0.13703.exe"-VerbrunAs-ArgumentList'/s','/v"/qn"'Start-Process-FilePath"D:\360Downloads\software\WPS-Office_11.1.0.13703.exe"......