FIT5222 Assignment 2: executing and pipelining processes
1/4
Assignment 2: executing and pipelining processes
Due 30 Apr by 23:59 Points 10 Available until 4 May at 23:59
Overview
Assignment 2 is now available.
It's worth 10% of your overall mark for the course.
Submission will be via the CS web submission system:
https://cs.adelaide.edu.au/services/websubmission/
(https://cs.adelaide.edu.au/services/websubmission/)
Due 11:59pm, Sunday (end of week 7 - after the break)
Detailed handin instructions at end of specification.
This assignment is worth 10% of your marks for this course.
Description
For this assignment you will write two C programs to execute a list of commands.
Your first program (sequence.c) will simply read in the commands and then execute them in a
sequence.
The second program (pipeline.c) will execute the commands in a pipeline, where the output of
each command becomes the input to the next command in the sequence:
cmd1 | cmd2 | cmd3 ………… | cmdn
Round 1: sequence.c
This program should read and execute a list of commands from stdin. Each command and its
arguments (if any) will appear on a separate line. For example, if the file "cmdfile" contains the lines:
whoami
cal 4 2020
echo The time is:
date
then running
./sequence < cmdfile
29/03/2023, 19:25 Assignment 2: executing and pipelining processes
2/4
should output your username, a calendar of the month of April, the string "The time is:", and the
current date/time, to standard output.
Suggested approach: first, make sure you can parse a command and its arguments correctly, and
store them as an array of C strings. Test this thoroughly before moving on, making use of trace
statements to make sure you've accounted for all the cases you can come up with! Debugging
processes and pipes can be tricky so you want to have confidence you are giving later parts of your
program the correct input. For the purposes of this assignment, you can assume a maximum of 10
arguments per command, 256 characters per line, and 100 lines per file.
Second, look at the exec() family of functions and use one to execute each command in turn. Hint:
there is a sample program from the first lecture on processes that does something very similar! Here
is a pseudo-code version of the setup:
while there are remaining commands:
read line from file
parse line into command and arguments
for cmd in commands:
fork and handle errors
if (child)
execute command
else // parent
wait for child to terminate
Note: Simply calling the 'system command in a loop' is not considered a correct solution to this
question.
Round 2: pipeline.c
This program takes the same input as sequence.c, but executes the commands as a pipeline, where
the output of each command is piped to the input of the next command in line. The input of the first
command, and the output of the final command, should not be altered. For example, if the file
"cmdpipe" contains the lines
ls -s1
sort -n
tail -n 5
then running
./pipeline < cmdpipe
should output the 5 largest files in the current directory, in order of size.
Suggested approach: set it up so that the parent process forks a child to execute each command in
turn, and keeps track of the pipes that the current child should read from and write to. The child
redirects its input and output to these pipes, and then executes the current command. Here is a
pseudo-code version of the setup:
29/03/2023, 19:25 Assignment 2: executing and pipelining processes
3/4
This pseudocode will also be covered in lectures.
// For each command except the final one:
// new_pipe = the output of the current command
// For each command except the first one:
// prev_pipe = the output of the previous command, input of current command
for cmd in cmds:
if this is not the final command:
pipe (new_pipe) // Create a new pipe
fork and handle errors
if (child)
if this is not the first command:
Redirect input to prev_pipe
if this is not the final command:
Redirect output to new_pipe
execute command
else // parent
if this is not the first command:
close prev_pipe
if this is not the final command:
prev_pipe = new_pipe
close any remaining pipes, clean up
Remember that once you call fork, both parent and child have their own copy of all variables,
including pipes! Have a look at the pattern for setting up processes to read and write from pipes, from
lectures.
Make sure you close all pipes when they are no longer needed as not doing so can cause behaviour
that is hard to debug.
Note your code should work with any command. For example:
cal
cat pipeline.c
grep .
wc -l
should print out the number of non-blank lines in your source file (the first line has no effect - why?).
Note: Simply calling the 'system command with a big string containing | characters' is not considered
a correct solution to this question.
Submission Instructions
The handin key for this exercise is: assignment2. The following SVN commands will enable you to
make a repository for this assignment. Please note the following:
• Perform these steps in the order written once only!
• Replace XXXXXX, where it appears in the commands, with YOUR student id.
• Some commands are long — they must be typed on one line.
29/03/2023, 19:25 Assignment 2: executing and pipelining processes
4/4
Use the Unix “cd” command to change to the place where you want your exercise directory to be
stored, then type these commands:
svn mkdir --parents -m "spc assignment2 start" https://versioncontrol.adelaide.edu.au/svn/a1XXXXXX/20YY/s1/spc/assignment2
(creates this directory in your svn tree, replace X with your student number, Y with the current year)
svn co https://version-control.adelaide.edu.au/svn/a1XXXXXX/20YY/s1/spc/assignment2 .
(checks out a working copy in your directory) You can now begin work.
You can add a file to the repository by typing the commands:
svn add NAME-OF-FILE
svn commit -m "REASON-FOR-THE-COMMIT"
where “reason-for-the-commit” should be some brief text that explains why you changed the code
since the last commit. Note that you only need to add a file once — after that, SVN will “know” it is in
the repository. You are now ready to commence working on the exercise.
The files you handin must include:
1. Your C source files as specified above.
2. A Makefile that will compile your C sources as specified above (make sequence, make
pipeline)
At the start of your Makefile please have the following lines:
all: sequence pipeline
# Your stuff goes below i.e.
sequence: ...
<some commands you write>
pipeline: ...
<some commands you write>
Make sure you commit your files frequently, in case you have an accident. The University’s SVN
repository is very reliable, and is backed up regularly — your computer probably is not... Regular
submission is also a good defence against plagiarism by others, since the submissions are dated.
We will test the behaviour of your scripts using an automated tester. The tester is thorough, and will
find places where your scripts do not work correctly. If it finds an error, it will offer a (vaguish) hint.
You should also come up with your own tests, as we may add extra test cases when determining
your final mark!
Note that we reserve the right to deduct marks if your code does anything egregious or games the
system to obtain marks.
End of Instructions.
WX：codehelp mailto: [email protected]
标签：pipe,processes,commands,will,executing,command,pipelining,your From： https://www.cnblogs.com/nytalt/p/17275975.html