Kubeadm 安装
需要的的机器：
192.168.111.25 master01
192.168.111.21 node01
192.168.111.23 node02
环境准备：
所有节点，关闭防火墙规则，关闭selinux，关闭swap交换
systemctl stop firewalld
systemctl disable firewalld
setenforce 0
sed -i 's/enforcing/disabled/' /etc/selinux/config
iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X
swapoff -a #交换分区必须要关闭
sed -ri 's/.*swap.*/#&/' /etc/fstab #永久关闭swap分区，&符号在sed命令中代表上次匹配的结果
#加载 ip_vs 模块
for i in $(ls /usr/lib/modules/$(uname -r)/kernel/net/netfilter/ipvs|grep -o "^[^.]*");do echo $i; /sbin/modinfo -F filename $i >/dev/null 2>&1 && /sbin/modprobe $i;done
修改主机名
hostnamectl set-hostname master01
hostnamectl set-hostname node01
hostnamectl set-hostname node02
vim /etc/hosts
192.168.111.25 master01
192.168.111.21 node01
192.168.111.23 node02
//调整内核参数
cat > /etc/sysctl.d/kubernetes.conf << EOF
#开启网桥模式，可将网桥的流量传递给iptables链
net.bridge.bridge-nf-call-ip6tables=1
net.bridge.bridge-nf-call-iptables=1
#关闭ipv6协议
net.ipv6.conf.all.disable_ipv6=1
net.ipv4.ip_forward=1
EOF
生效参数
sysctl --system
[root@25 ~]# systemctl stop firewalld
[root@25 ~]# systemctl disable firewalld
[root@25 ~]# setenforce 0
[root@25 ~]# sed -i 's/enforcing/disabled/' /etc/selinux/config
[root@25 ~]# iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X
[root@25 ~]# swapoff -a
[root@25 ~]# sed -ri 's/.*swap.*/#&/' /etc/fstab
[root@25 ~]# for i in $(ls /usr/lib/modules/$(uname -r)/kernel/net/netfilter/ipvs|grep -o "^[^.]*");do echo $i; /sbin/modinfo -F filename $i >/dev/null 2>&1 && /sbin/modprobe $i;done
ip_vs_dh
ip_vs_ftp
[root@25 ~]# hostnamectl set-hostname master01
[root@25 ~]# vim /etc/hosts
[root@25 ~]# cat > /etc/sysctl.d/kubernetes.conf << EOF
> #开启网桥模式，可将网桥的流量传递给iptables链
> net.bridge.bridge-nf-call-ip6tables=1
> net.bridge.bridge-nf-call-iptables=1
> #关闭ipv6协议
> net.ipv6.conf.all.disable_ipv6=1
> net.ipv4.ip_forward=1
> EOF
[root@25 ~]# sysctl --system
* Applying /usr/lib/sysctl.d/00-system.conf ...
* Applying /usr/lib/sysctl.d/10-default-yama-scope.conf ...
kernel.yama.ptrace_scope = 0
[root@23 ~]# systemctl enable kubelet.service
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
[root@23 ~]# kubeadm join 192.168.111.25:6443 --token agsjqv.418o885psv2uxdgl --discovery-token-ca-cert-hash sha256:fb377a95a613e5f6721ba07bee3dcdaa9a54b71e295501e7d7a5fe6c97c3af0e
[preflight] Running pre-flight checks
[WARNING SystemVerification]: this Docker version is not on the list of validated versions: 23.0.1. Latest validated version: 19.03
[WARNING Hostname]: hostname "node02" c
[root@23 ~]# cd /opt
[root@23 opt]# ls
cni containerd flannel.tar k8s rh
[root@23 opt]# docker load < flannel.tar
777b2c648970: Loading layer 5.848MB/5.848MB
815dff9e0b57: Loading layer 11.42MB/11.42MB
2e16188127c8: Loading layer 2.267MB/2.267MB
eb738177d102: Loading layer 49.34MB/49.34MB
b613d890216c: Loading layer 5.12kB/5.12kB
8a984b390686: Loading layer 9.216kB/9.216kB
814fbd599e1f: Loading layer 7.68kB/7.68kB
Loaded image: quay.io/coreos/flannel:v0.14.0
[root@25~]#yum-config-manager--add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
已加载插件：fastestmirror, langpacks
adding repo from: https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
grabbing file https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
[root@25 ~]# yum install -y docker-ce docker-ce-cli containerd.io
已加载插件：fastestmirror, langpacks
docker-ce-stable | 3.5 kB 00:00
(1/2): docker-ce-stable/7/x86_64/updateinfo | 55 B 00:00
(2/2): docker-ce-stable/7/x86_64/primary_db | 97 kB 00:06
Loading mirror speeds from cached hostfile
* base: mirrors.ustc.edu.cn
* extras: mirrors.ustc.edu.cn
* updates: mirrors.ustc.edu.cn
正在解决依赖关系
--> 正在检查事务
---> 软件包 containerd.io.x86_64.0.1.6.16-3.1.el7 将被 安装
--> 正在处理依赖关系 container-sel
[root@25 ~]# systemctl restart docker
[root@25 ~]# systemctl enable docker.service
[root@25 ~]# docker info | grep "Cgroup Driver"
Cgroup Driver: systemd
[root@25 ~]# cat > /etc/yum.repos.d/kubernetes.repo << EOF
> [kubernetes]
> name=Kubernetes
> baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
> enabled=1
> gpgcheck=0
> repo_gpgcheck=0
> gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
> EOF
[root@25 ~]# yum install -y kubelet-1.20.11 kubeadm-1.20.11 kubectl-1.20.11
已加载插件：fastestmirror, langpacks
kubernetes | 1.4 kB 00:00
kubernetes/primary | 124 kB 00:01
Loading mirror speeds from cached hostfile
* base: mirrors.ustc.edu.cn
* extras: mirrors.ustc.edu.cn
[root@25 ~]# systemctl enable kubelet.service
Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
[root@25 ~]# cd /opt
[root@25 opt]# unzip v1.20.11.zip -d /opt/k8s
Archive: v1.20.11.zip
creating: /opt/k8s/v1.20.11/
inflating: /opt/k8s/v1.20.11/apiserver.tar
inflating: /opt/k8s/v1.20.11/controller-manager.tar
inflating: /opt/k8s/v1.20.11/coredns.tar
inflating: /opt/k8s/v1.20.11/etcd.tar
inflating: /opt/k8s/v1.20.11/pause.tar
inflating: /opt/k8s/v1.20.11/proxy.tar
inflating: /opt/k8s/v1.20.11/scheduler.tar
[root@25 opt]# cd /opt/k8s/v1.20.11
[root@25 v1.20.11]# for i in $(ls *.tar); do docker load -i $i; done
07363fa84210: Loading layer 3.062MB/3.062MB
[root@25 v1.20.11]# scp -r /opt/k8s [email protected]:/opt
The authenticity of host '192.168.111.23 (192.168.111.23)' can't be established.
ECDSA key fingerprint is SHA256:5Kq4jP4lwc+9mzHeZLdCPfIjQUK6G9lIDDaW8CC6VWc.
ECDSA key fingerprint is MD5:cd:f1:a4:b5:16:14:74:91:4d:24:d8:1d:67:bd:55:2f.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.111.23' (ECDSA) to the list of known hosts.
[email protected]'s password:
apiserver.tar 100% 117MB 123.9MB/s 00:00
controller-manager.tar 100% 112MB 128.4MB/s 00:00
coredns.tar 100% 43MB 120.6MB/s 00:00
etcd.tar 100% 243MB 132.3MB/s 00:01
pause.tar 100% 677KB 53.6MB/s 00:00
proxy.tar 100% 97MB 133.2MB/s 00:00
scheduler.tar 100% 46MB 133.1MB/s 00:00
[root@25 v1.20.11]# kubeadm init \
> --apiserver-advertise-address=192.168.111.25 \
> --image-repository registry.aliyuncs.com/google_containers \
> --kubernetes-version=v1.20.11 \
> --service-cidr=10.96.0.0/16 \
> --pod-network-cidr=10.244.0.0/16 \
> --token-ttl=0
[init] Using Kubernetes version: v1.20.11
[root@25 ~]# kubectl apply -f kube-flannel.yml
namespace/kube-flannel unchanged
clusterrole.rbac.authorization.k8s.io/flannel unchanged
clusterrolebinding.rbac.authorization.k8s.io/flannel unchanged
serviceaccount/flannel unchanged
configmap/kube-flannel-cfg unchanged
daemonset.apps/kube-flannel-ds unchanged
[root@25 ~]# kubectl get pods -n kube-system
NAME READY STATUS RESTARTS AGE
coredns-7f89b7bc75-bkmvb 1/1 Running 0 76m
coredns-7f89b7bc75-xbf55 1/1 Running 0 76m
etcd-master01 1/1 Running 0 77m
[root@25 ~]# vim /etc/kubernetes/manifests/kube-scheduler.yaml
[root@25 ~]# vim /etc/kubernetes/manifests/kube-controller-manager.yaml
[root@25 ~]# kubectl get pods -A
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-flannel kube-flannel-ds-kfqgs 1/1 Running 0 7m27s
kube-flannel kube-flannel-ds-vsqqk 1/1 Running 0 7m27s
kube-flannel kube-flannel-ds-vt7kp 1/1 Running 0 7m27s
kube-system coredns-7f89b7bc75-bkmvb 1/1 Running 0
[root@25 ~]# kubectl get cs
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME STATUS MESSAGE ERROR
scheduler Healthy ok
controller-manager Healthy ok
etcd-0 Healthy {"health":"true"}
[root@25 ~]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master01 Ready control-plane,master 81m v1.20.11
node01 Ready node 21m v1.20.11
node02 Ready node 21m v1.20.11
[root@25 ~]# kubectl get pods -A
[root@25 ~]# kubectl create deployment nginx --image=nginx:1.14
deployment.apps/nginx created
[root@25 ~]#
[root@25 ~]# kubectl expose deployment nginx --port=80 --type=NodePort
service/nginx exposed
[root@25 ~]# kubectl get pods
NAME READY STATUS RESTARTS AGE
nginx-5658bdf5d4-jdqjx 1/1 Running 0 42s
[root@25 ~]#
[root@25 ~]# kubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 82m
nginx NodePort 10.96.189.254 <none> 80:32525/TCP 20s
[root@25 ~]# kubectl scale deployment nginx --replicas=3
deployment.apps/nginx scaled
[root@25 ~]# kubectl get pods -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
nginx-5658bdf5d4-94hff 1/1 Running 0 7s 10.244.1.3 node01 <none> <none>
nginx-5658bdf5d4-jdqjx 1/1 Running 0 34m 10.244.1.2 node01 <none> <none>
nginx-5658bdf5d4-zjwv8 1/1 Running 0 7s 10.244.1.4 node01 <none> <none>
[root@25 k8s]# cd /opt
[root@25 opt]# vim recommended.yaml
[root@25 opt]# kubectl apply -f recommended.yaml
[root@25 opt]# kubectl create serviceaccount dashboard-admin -n kube-system
serviceaccount/dashboard-admin created
[root@25 opt]# kubectl create clusterrolebinding dashboard-admin --clusterrole=cluster-admin --serviceaccount=kube-system:dashboard-admin
clusterrolebinding.rbac.authorization.k8s.io/dashboard-admin created
[root@25 opt]# kubectl describe secrets -n kube-system $(kubectl -n kube-system get secret | awk '/dashboard-admin/{print $1}')
Name: dashboard-admin-token-5gvkv
Namespace: kube-system
Labels: <none>
Annotations: kubernetes.io/service-account.name: dashboard-admin
kubernetes.io/service-account.uid: 5465cdd1-5e00-4ea5-a3f0-e692f4875aa3
[root@25 opt]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
master01 Ready control-plane,master 132m v1.20.11
node01 Ready node 73m v1.20.11
node02 Ready node 72m v1.20.11
-------------------- 安装Harbor私有仓库 --------------------
//修改主机名
hostnamectl set-hostname hub.cj.com
//所有节点加上主机名映射
echo '192.168.111.20 hub.cj.com' >> /etc/hosts
//安装 docker
yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum install -y docker-ce docker-ce-cli containerd.io
mkdir /etc/docker
cat > /etc/docker/daemon.json <<EOF
{
"registry-mirrors": ["https://6ijb8ubo.mirror.aliyuncs.com"],
"exec-opts": ["native.cgroupdriver=systemd"],
"log-driver": "json-file",
"log-opts": {
"max-size": "100m"
},
"insecure-registries": ["https://hub.kgc.com"]
}
EOF
[root@20 ~]# mkdir /etc/docker
mkdir: 无法创建目录"/etc/docker": 文件已存在
[root@20 ~]# cat > /etc/docker/daemon.json <<EOF
> {
> "registry-mirrors": ["https://6ijb8ubo.mirror.aliyuncs.com"],
> "exec-opts": ["native.cgroupdriver=systemd"],
> "log-driver": "json-file",
> "log-opts": {
> "max-size": "100m"
> },
> "insecure-registries": ["https://hub.kgc.com"]
> }
> EOF
