Low Level Operators and Bit Fields

Low Level Operators and Bit Fields

Many programs (e.g. systems type applications) must actually operate at a low level where individual bytes must be operated on.

NOTE: The combination of pointers and bit-level operators makes C useful for many low level applications and can almost replace assembly code. (Only about 10 % of UNIX is assembly code the rest is C!!.)

Bitwise Operators

The bitwise operators of C a summarised in the following table:

Table: Bitwise operators

DO NOT confuse & with &&: & is bitwise AND, && logical AND. Similarly for and .

is a unary operator -- it only operates on one argument to right of the operator.

The shift operators perform appropriate shift by operator on the right to the operator on the left. The right operator must be positive. The vacated bits are filled with zero (i.e. There is NO wrap around).

For example: x << 2 shifts the bits in x by 2 places to the left.

So:

if x = 00000010 (binary) or 2 (decimal)

then:

or 0 (decimal)

Also: if x = 00000010 (binary) or 2 (decimal)

or 8 (decimal)

Therefore a shift left is equivalent to a multiplication by 2.

Similarly a shift right is equal to division by 2

NOTE: Shifting is much faster than actual multiplication (*) or division (/) by 2. So if you want fast multiplications or division by 2 use shifts.

To illustrate many points of bitwise operators let us write a function, Bitcount, that counts bits set to 1 in an 8 bit number (unsigned char) passed as an argument to the function.

This function illustrates many C program points:

• for loop not

Bit Fields

Bit Fields allow the packing of data in a structure. This is especially useful when memory or data storage is at a premium. Typical examples:

• Packing several objects into a machine word. e.g. 1 bit flags can be compacted -- Symbol tables in compilers.
• Reading external file formats -- non-standard file formats could be read in. E.g. 9 bit integers.

C lets us do this in a structure definition by putting :bit length after the variable. i.e.

struct packed_struct {
     unsigned int f1:1;
     unsigned int f2:1;
     unsigned int f3:1;
     unsigned int f4:1;
     unsigned int type:4;
     unsigned int funny_int:9;
} pack;

Here the packed_struct contains 6 members: Four 1 bit flags f1..f3, a 4 bit type and a 9 bit funny_int.

Bit Fields: Practical Example

Frequently device controllers (e.g. disk drives) and the operating system need to communicate at a low level. Device controllers contain several registers which may be packed together in one integer (Figure ​​12.1​​).

Fig. ​​12.1​​ Example Disk Controller Register We could define this register easily with bit fields:

struct DISK_REGISTER  {     unsigned ready:1;     unsigned error_occured:1;
     unsigned disk_spinning:1;
     unsigned write_protect:1;
     unsigned head_loaded:1;
     unsigned error_code:8;
     unsigned track:9;
     unsigned sector:5;
     unsigned command:5;
};

To access values stored at a particular memory address, DISK_REGISTER_MEMORY

struct DISK_REGISTER *disk_reg = (struct DISK_REGISTER *) DISK_REGISTER_MEMORY;

The disk driver code to access this is now relatively straightforward:

/* Define sector and track to start read */disk_reg->sector = new_sector;disk_reg->track = new_track;
disk_reg->command = READ;

/* wait until operation done, ready will be true */

while ( ! disk_reg->ready ) ;

/* check for errors */

if (disk_reg->error_occured)
  { /* interrogate disk_reg->error_code for error type */
    switch (disk_reg->error_code)
    ......
  }

A note of caution: Portability

Bit fields are a convenient way to express many difficult operations. However, bit fields do suffer from a lack of portability between platforms:

• integers may be signed or unsigned
• Many compilers limit the maximum number of bits in the bit field to the size of an integer
• Some bit field members are stored left to right others are stored right to left in memory.
• If bit fields too large, next bit field may be stored consecutively in memory (overlapping the boundary between memory locations) or in the next word of memory.

If portability of code is a premium you can use bit shifting and masking to achieve the same results but not as easy to express or read. For example:

unsigned int  *disk_reg = (unsigned int *) DISK_REGISTER_MEMORY;/* see if disk error occured */disk_error_occured = (disk_reg & 0x40000000) >> 31;

C automatically packs the above bit fields as compactly as possible, provided that the maximum length of the field is less than or equal to the integer word length of the computer. If this is not the case then some compilers may allow memory overlap for the fields whilst other would store the next field in the next word (see comments on bit fiels portability below).

Access members as usual via:

pack.type = 7;

NOTE:

• Only n lower bits will be assigned to an n bit number. So type cannot take values larger than 15 (4 bits long).
• Bit fields are always
• You are allowed to mix ``normal'' types with bit fields.
• The unsigned definition is important - ensures that no bits are used as a flag.

• x x = x >> 1
• for loop will repeatedly shift right x until x
• use expression evaluation of x & 01 to control if
• x & 01 masks of 1st bit of x if this is 1 then count++

int bitcount(unsigned char x) 
 
  { int count;
 
    for (count=0; x != 0; x>>=1)
      if ( x & 01)
         count++;
    return count;
  }