Henry Spencer's Regexp Engine Revisited
Introduction
Regular expressions (sometimes known as regexps) are used to describe text pattern matching in a concise form. They are useful whenever you need to apply such pattern matching: input validation, lightweight lexing, parsing email addresses, and so on. Many scripting languages (such as Perl and Python) have a built-in regular expression engines. One is also provided with the .NET framework.
For C++ programmers, there are several regular expression libraries available "in the wild" already. They are faster and more up to date than this one. They also understand more complex regular expressions (such as Perl regexps or POSIX regexps). One of those is Boost.Regex; it's even documented on CodeProject, and I highly recommend it in general.
Why provide this one, then?
One answer: code footprint. This library is based on Henry Spencer's early public-domain regular expression implementation. When compiled with the test program under a Linux/ELF32 system, weights around 20 KB. Under Win32, you get a bit more than 19 KB in release mode. Most full POSIX-compliant regular expression engines (such as Boost.RegExp, PCRE, GNU Regex, or Henry Spencer's newest library) usually weight in around 50 KB with similar compilation options.
Code footprint may not seem to be a big deal in those days of 100 GB hard drives and multi megabyte applications. However, there may be reasons you need a small footprint - you may want to use regular expressions on a Pocket PC, for instance, or put it in a downloadable ActiveX control.
In addition, sometimes you don't need the full POSIX regular expressions; simple regexes will do find. Or you may want simple code so you can understand the implementation more easily. In those cases, this small engine is just the deal.
Background
To use this library, you need to know the basic regular expression syntax. A good introduction can be found at this page. This particular implementation is a superset of the "extended regular expression" dialect.
Essentially, the following are available:
- Metacharacters ".", "[...]" and "[^...]";
- "+", "*" and "?" quantifiers;
- Anchors "^", "$", "\<" and "\>";
- Alternation "|";
- Subexpressions "(...)";
- Cheap character classes "\x" where x is a letter which maps to a primitive ctype.h function, as follows:
- "\m":
isalnum() - "\a":
isalpha() - "\b":
isblank()(GNU extension to ctype.h; essentially maps space and tab) - "\c":
iscntrl() - "\d":
isdigit() - "\g":
isgraph() - "\l":
islower() - "\p":
isprint() - "\n":
ispunct() - "\s":
isspace() - "\u":
isupper() - "\x":
isxdigit() - "\w":
isword()(not a ctype.h routine, matchesisalnum()+ the underscore character)
Capitalize the letter to get the reverse match (for instance, "\D" matches every character for which
isdigit()returnsfalse) - "\m":
In other words, it does not support:
- Numbered matches "{n}" or "{n,m}" (however, those may be possible to add, at cost of relatively high memory usage).
- Beginning or end of word matches "\b" and "\B" (those map to the
isblank()character class instead); note that "\<" and "\>" can serve roughly the same purpose. - Backreferences within the regular expression (those were singlehandedly responsible for forcing Mr. Spencer's rewrite of his library, as far as I understand).
- POSIX collating elements "[.char.]" and "[=char=]".
- POSIX character classes "[:class:]" (however, see the Cheap character classes described above).
- Case insensitive matches and "basic" regular expressions.
- Perl-like character classes.
In general, consider the engine to support the extended, pre-POSIX regular expression syntax, without the Perl extensions, and with character classes added "on top" by me as a somewhat ugly hack.
As mentioned before, the original regexp engine was written by Henry Spencer; I found it at ftp://ftp.zoo.toronto.edu/ and modified to support wide characters with the appropriate preprocessor definition. I also extended it to work with an arbitrary number of subexpressions (the original code was limited to 9). The resulting interface is close to the POSIX regex interface, but not quite the same, unfortunately. This gives it a re-entrant interface (the original interface definitely was not re-entrant). I basically tailored the interface so it would be easy to make it work with dynamic memory allocation.
Using the code
The C interface
You have three ways of using that code. The basic C interface (found in the <file>regexp.h header) will work fine. It is used like this:
C++ Shrink ▲#include "regexp.h"
#include <string>
#include <vector>
int parse_email(const std::string& to_match,
std::string& user_name,
std::string& host_and_domain,
std::string& domain_suffix)
{
regexp* compiled; // line A
int retval = re_comp(&compiled,
"^([A-Za-z0-9]+)@(.+)\\.(\\a+)$"); // line B
if(retval < 0)
return retval; // line C
regmatch* matches = new regmatch[re_nsubexp(compiled)]; // line D
retval = re_exec(compiled,
to_match.c_str(),
re_nsubexp(compiled),
&matches[0]); // line E
re_free(compiled); // line F
if(retval < 1) // line G
{
delete[] matches;
return retval;
}
user_name = std::string(to_match.begin() + matches[1].begin,
to_match.begin() + matches[1].end); // line H
host_and_domain = std::string(to_match.begin() + matches[2].begin,
to_match.begin() + matches[2].end);
domain_suffix = std::string(to_match.begin() + matches[3].begin,
to_match.begin() + matches[3].end);
delete[] matches;
return 1;
}
int main(int argc, char* argv[])
{
if(argc >= 2)
{
std::string user_name, host_and_domain, domain_suffix;
if(parse_email(argv[1], user_name,
host_and_domain, domain_suffix) < 1)
{
printf("Not an email address\n");
return 1;
}
printf("User name: %s\nHost/domain: %s\nDomain suffix: %s\n",
user_name.c_str(),
host_and_domain.c_str(),
domain_suffix.c_str());
return 0;
}
printf("Usage: %s <email address>\n", argv[0]);
return 1;
}
The program above contains a cheap email parser (the regular expression is not compliant with any RFC, it just seems to work for the two test addresses I gave it). It splits the email in user name, domain prefix, and domain suffix (the domain suffix is, say, the ".com" at the end of an address).
Here are explanations of the interesting lines in function parse_email():
- LINE A: regular expressions must be compiled before they can be used. Compiled regular expressions are returned through a pointer to an opaque type,
regexp. You must therefore declare aregexp*to hold the compiled regular expression. - LINE B: this statement creates a compiled regular expression. The resulting compiled expression is placed in
&compiled; the second argument is the regular expression itself. Note that since we express it as a constant C string, we need to double every backslash in the expression.The expression works thus: first match any alphanumeric characters, up until the @ sign; then, match one or more of any characters, followed by a "." (matching is "greedy", which means the last "." of the expression will terminate the second subexpression); finally, match one or more alphabetic characters.
- LINE C:
re_comp()returns 0 on success, or a negative error code on failure. Error codes are defined in <file>regexp.h and can be any of:REGEXP_BADARG: invalid argumentREGEXP_ESIZE: regular expression too bigREGEXP_ESPACE: out of memoryREGEXP_EPAREN: parenteses () not balancedREGEXP_ERANGE: invalid character rangeREGEXP_EBRACK: brackets [] not balancedREGEXP_BADRPT: quantifier operator invalidREGEXP_EESCAPE: invalid escape \ sequenceREGEXP_EEND: internal error!
- LINE D: To attempt to match a compiled regular expression, use the
re_exec()function. That function takes an array ofregmatchstructs. There should be one element in the array per subexpression in the regexp. In line D, we allocate an array to store the matches. There_nsubexp()function queries the compiled regular expression for the number of submatches it contains. - LINE E: Here, we finally try to match the regular expression. The first argument to
re_exec()is the compiled regexp; then, pass the string to match, the number of elements in the match array, and the address to the match array. If you're not interested in the submatches, you can pass 0 as the third parameter andNULLas the last parameter. Make sure you have at least as many elements in the array you pass as the size passed in the third parameter. - LINE F: Once you're done with a compiled pattern, you should free it using
re_free(). Please don't usefree()ordelete[]to free it (however, see the Customization section if you want to override the memory allocator used by the regular expression engine).Note that you should probably keep those compiled regular expressions around for the duration of the program. Since compilation is a relatively slow process, it's best to keep the compiled expression as long as it's possible you'll need it again.
- LINE G: The
re_exec()function can return a negative error code (the same as@code{re_comp()}, 0(meaning the string didn't match the regexp), or 1 (meaning the string did match the regexp). - LINE H: The
regmatchstructure contains two fields:beginandend. They contain offsets into the string passed tore_exec().beginis the start offset of the submatch, andendis the offset of the character one-past-the-end of the submatch (hence,end - beginis the length of the submatch).Element 0 of match array is always the match of the full regexp. Element 1 is the first subexpression (counting from the left), and so on.
If a given element was not matched, its
beginandendfields will be set to -1.In the example statement, we use the offsets to calculate the begin and end iterator of the substring for the first subexpression.
REGEXP_UNICODE preprocessor symbol defined, you get wide character versions of the re_comp() and re_exec() routines. Those are accessed through the re_comp_w() and re_exec_w() routines. They work exactly like their non-"_w" versions, except that they take wide character strings instead of multibyte strings. Here's the example function rewritten for wide characters:
C++
Shrink ▲
#define REGEXP_UNICODE
#include "regexp.h"
#include <string>
#include <vector>
int parse_email(const std::wstring& to_match,
std::wstring& user_name,
std::wstring& host_and_domain,
std::wstring& domain_suffix)
{
regexp* compiled; // line A
int retval = re_comp_w(&compiled,
L"^([A-Za-z0-9]+)@(.+)\\.(\\a+)$"); // line B
if(retval < 0)
return retval; // line C
regmatch* matches = new regmatch[re_nsubexp(compiled)]; // line D
retval = re_exec_w(compiled,
to_match.c_str(),
re_nsubexp(compiled),
&matches[0]); // line E
re_free(compiled); // line F
if(retval < 1) // line G
{
delete[] matches;
return retval;
}
user_name = std::wstring(to_match.begin() + matches[1].begin,
to_match.begin() + matches[1].end); // line H
host_and_domain = std::wstring(to_match.begin() + matches[2].begin,
to_match.begin() + matches[2].end);
domain_suffix = std::wstring(to_match.begin() + matches[3].begin,
to_match.begin() + matches[3].end);
delete[] matches;
return 1;
}
The Class Interface
As an example, and also for convenience, the demo code contains a CRegExp class which can serve as a nice interface to the library. That interface uses the CString class which is available in WTL (note that it can probably work with MFC as well - I just haven't tested it).
Here's the class declaration for the CRegExp class (private details omitted):
class CRegExpException
{
public:
CRegExpException(int nError);
int GetError() const;
CString GetErrorString() const;
};
class CRegExp
{
public:
CRegExp(LPCTSTR pszPattern);
~CRegExp();
BOOL Exec(const CString& pszMatch);
BOOL IsMatched(int nSubExp = 0) const;
int GetMatchStart(int nSubExp = 0) const;
int GetMatchEnd(int nSubExp = 0) const;
CString GetMatch(int nSubExp = 0) const;
int GetNumberOfMatches() const;
};
An instance of the CRegExpException class is thrown whenever the library returns an error; GetError() returns the error code (as described in the C interface section), and GetErrorString() returns a plain English string associated to the error.
The CRegExp class has the following members:
CRegExp::CRegExp(LPCTSTR pszPattern)
Creates a newCRegExpobject with regular expressionpszPattern.int CRegExp::GetNumberOfMatches()
Returns the number of matches that can be expected from the pattern which was passed as construction, which is equal to the number of subexpressions in the pattern, plus one. For instance, if the pattern contains two subexpressions,GetNumberOfMatches()returns 3.BOOL CRegExp::Exec(const CString& sMatch)
Attempts to matchsMatchwith the regular expression specified at construction time. ReturnsTRUEif the expression was matched,FALSEotherwise.int CRegExp::GetMatchStart(int nSubExp = 0)int CRegExp::GetMatchEnd(int nSubExp = 0)CString CRegExp::GetMatch(int nSubExp = 0)BOOL CRegExp::IsMatched(int nSubExp = 0)
Can only be called after a call toCRegExp::Exec().GetMatchStart()returns the starting offset of thenSubExp'th subexpression (with 0 meaning the whole expression, 1 the first subexpression, and so on).GetMatchEnd()returns the offset of one-past-the-end of thenSubExp'th subexpression.GetMatch()returns the string which matched thenSubExp'th subexpression.IsMatched()simply returns whether thenSubExp'th subexpression was matched.Note that when you specify a subexpression that was either not matched or one which is past the range of valid subexpressions,
GetMatchStart()andGetMatchEnd()return -1, andGetMatch()returns an empty string.
Here is the C example (from the C interface section) reworked for wrapper use:
C++BOOL ParseEMail(const CString& sToMatch,
CString& sUserName,
CString& sHostAndDomain,
CString& sDomainSuffix)
{
CRegExp reEMailExpr(_T("^([A-Za-z0-9]+)@(.+)\\.(\\a+)$"));
if(reEMailExpr.Exec(sToMatch) == FALSE)
return FALSE;
// the regular expression's format should ensure that all
// three expressions match, or the expression doesn't match
// at all.
ATLASSERT(reEMailExpr.IsMatched(1) &&
reEMailExpr.IsMatched(2) &&
reEMailExpr.IsMatched(3));
sUserName = reEMailExpr.GetMatch(1);
sHostAndDomain = reEMailExpr.GetMatch(2);
sDomainSuffix = reEMailExpr.GetMatch(3);
return TRUE;
}
Standard C++ Wrapper
For those of you who do not have access to CString but do have access to the Standard C++ Library, you have not been forgotten. The wrapper provided here is not in the same class as Boost.RegExp (which is much more comprehensive and is optimized for minimal heap usage), but it should be sufficient to make the C interface more friendly.
Here's the class declaration for the regular_expression class (private details omitted):
class regular_expression_error : public std::runtime_error
{
public:
regular_expression_error(int error_code, regexp* re);
int code() const;
const char* message() const;
};
class regular_expression
{
public:
#ifdef REGEXP_UNICODE
typedef wchar_t CharT;
typedef std::wstring string_type;
#else
typedef char CharT;
typedef std::string string_type;
#endif
typedef typename string_type::size_type size_type;
typedef typename string_type::const_iterator const_iterator;
regular_expression(const CharT* pattern);
regular_expression(const string_type& pattern);
bool exec(const CharT* match);
bool exec(const string_type& match);
bool matched(size_type sub_exp = 0) const;
const_iterator begin(size_type sub_exp = 0) const;
const_iterator end(size_type sub_exp = 0) const;
string_type operator[](size_type sub_exp) const;
size_type size() const;
};
An instance of the regular_expression_exception class is thrown whenever the library returns an error; code() returns the error code (as described in the C interface section), and message() returns a plain English string associated to the error.
The regular_expression template has the following members:
regular_expression(const CharT* pattern)regular_expression(const string_type& pattern)
Creates a newregular_expressionobject with regular expression passed inpattern. The regular expression is compiled, and the compiled representation remains until theregular_expressioninstance is destroyed.size_type size()
Returns the number of matches that can be expected from the pattern passed to the constructor. This is equal to the number of subexpressions in the pattern, plus one (the 0'th match, which is the whole expression, is always present).bool exec(const CharT* match)bool exec(const string_type& match)
Attempts to matchmatchwith the regular expression compiled in the object. Returnstrueif the expression was matched, andfalseotherwise.Note that
matchis copied within the instance of the class, to ensure thatbegin(),end()andoperator[]work properly regardless of what happens tomatch.const_iterator begin(size_type sub_exp = 0)const_iterator end(size_type sub_exp = 0)bool matched(size_type sub_exp = 0)string_type operator[] (size_type sub_exp)
Those methods can only be called after a successful call toexec().begin()returns an iterator pointing to the start of thesub_exp'th subexpression (with 0 being the whole expression, 1 being the first subexpression, and so on).end()works the same way, except that it returns an iterator point to one-past-the-end of thesub_exp'th subexpression.matched()returns whether thesub_exp'th subexpression was matched.Finally,
operator[]is equivalent tostring_type(begin(sub_exp), end(sub_exp)), that is, it returns thesub_exp'th match.Note that when passing an invalid
sub_exp(either because that subexpression was not matched, or becausesub_expis greater thansize()), the range represented bybegin()andend()will be empty, andoperator[]will return an emptystring_type.
REGEXP_UNICODE. Given that the underlying C code is not templatized with the character type, I had little choice in the matter.
Here is the C example (which should look very familiar by now, otherwise see the C interface section) reworked in all its standard library glory:
C++bool parse_email(const std::string& to_match,
std::string& user_name,
std::string& host_and_domain,
std::string& domain_suffix)
{
regular_expression email_expr("^([A-Za-z0-9]+)@(.+)\\.(\\a+)$");
if(!email_expr.exec(to_match))
return false;
// the regular expression's format should ensure that all three
// expressions match, or the expression doesn't match at all.
assert(email_expr.matched(1) &&
email_expr.matched(2) &&
email_expr.matched(3));
user_name = email_expr[1];
host_and_domain = email_expr[2];
domain_suffix = email_expr[3];
return true;
}
How to include the library in your project
I haven't provided a project file for the library itself because you probably won't want to make a DLL out of this library. Its code footprint is small enough to link it statically.
The following files serve as the "core" of the library:
- regexp.h (public header)
- regexp_int.h (internal header)
- regexp_custom.h (internal header)
- regmagic.h (internal header)
- memory.c (memory allocation routines)
- regerror.c (implementation of error translation function)
- regexp.c (main implementation file)
- report.c (default report functions)
- widechar.c (default implementation for Unicode character support)
The following files are optional and are only needed if you want to use the "old-style" interface and the substitution functions:
- frontend.c
- regsub.c
Finally, the following files are unit tests inherited from the original source files; you probably don't need them, but they are provided together with the rest of the library for consistency purposes:
- try.c
- timer.c
- tests
Depending on which wrapper you may want to use, you can also add the wtl/CRegExp.* or the stl/stdregexp.* files to your project. The demo projects show how this can be done.
Customization
Libraries such as this one tend to be used in a variety of context. Hence, I've tried to isolate the dependencies on runtime library routines so they can be easily overridden.
By default, the library allocates memory using malloc() and free(). However, if you want to use a custom allocator, simply provide implementations of the following two routines:
extern "C" void* re_malloc(size_t sz); extern "C" void re_cfree(void* p);
Those should have similar semantics to malloc() and free(). The provided memory.c file contains a default implementation which uses standard malloc() and free(); if you want to override this implementation, simply provide your own and don't link with the provided memory.c file.
In addition, when compiling with REGEXP_UNICODE, there is some attempt to providing a multibyte interface for those who work with mixed wide character/multibyte strings. It doesn't work quite well (subexpression offsets are not calculated properly), but if you are interested in using it, you'll definitely want to override the following two functions:
extern "C" wchar_t* re_ansi_to_unicode(const char* s); extern "C" char* re_unicode_to_ansi(const wchar_t* s);
Those functions should use re_malloc() to create a new string of the appropriate type. By default, the C library mbstowcs() and wcstombs() routines are used; however, you may want to map those to, say, ::MultiByteToWideChar()and ::WideCharToMultiByte(). The default implementation is in widechar.c; provide your own implementation and don't link with widechar.c to override the default behaviour. Note that you'll also have to provide an implementation of isblank() and iswblank() if you don't use the provided widechar.c; see comments in the file for details.
Finally, the regular expression library calls a function to report internal errors in a more fine-grained manner than through the REGEXP_* error codes. By default, reporting is done through fprintf(stderr, ...). To override this behaviour, provide
extern "C" void re_report(const char* error);
(Note that the error is always provided in plain chars) You could provide, for instance,
C++extern "C" void re_report(const char* error)
{
char buffer[128];
::wsprintfA(buffer, "REGEXP ERROR: %s\n", error);
::OutputDebugStringA(buffer);
}
The default implementation is in file report.c. Simply provide your own implementation and don't link with report.c if you don't like the default implementation.
The Demo Projects
The first demo program (re2demo.exe) is a simple WTL dialog application which allows you to explore different regular expressions. The top field should contain the regular expression; the middle field should contain the string to match. Once you press the "Try It" button, the matches will be placed in the bottom combo box (open the combo box to see all the submatches). If there was an error, or the string didn't match the regexp, the error will be printed as the first (and only) entry of the combo box.
Note that the demo program is not meant to be a demonstration of clean WTL style. It's mostly an example of how to integrate the regular expression engine in your own programs.
(Actually, I really should confess that I only wrote it to make sure the CRegExp class works properly)
The second demo program (try.exe) is a simple unit testing program which was provided in the original source code archive. It is provided in pre-compiled form simply as a convenience.
Future Directions
A few additional utilities, such as a string substitution routine and a global match routine, could be added with relatively little trouble. I've not done this yet in the interest of posting this code quickly.
In addition, I'm pretty sure it would be possible to support the {n} and {m,n} quantifiers (although it may be costly in terms of memory usage). I may decide to add this eventually.
Also, the fact that the plain char versions don't work right when REGEXP_UNICODE is defined is definitely a bug. The workaround right now is to have two separate libraries--one Unicode, one multibyte. It's a hack, and I dislike keeping such things around.
Finally, I seem to recall some modified version of this regexp engine which optimized some common case to yield better performance. I may eventually hunt it down and apply those modifications to the version provided here.
Related Work
There is another CRegExp class which exists in the wild. The author of this class is to thank for the inspiration of my implementation; that class made me aware of the availability of Mr. Spencer's code. However, one thing I didn't do was merge the C routines inside my own CRegExp class, the way it's done in the other implementation. Mainly, I wanted the code to remain easily customizable for non-MFC people, yet still benefit from the modifications I did (Unicode support and so on). The easiest way to do this is to keep the plain C interface around.
Before I ended up with this specific implementation, I tried to extract Mr. Spencer's latest implementation (which is buried somewhere in the Tcl/Tk code). I managed to extract it, but was disappointed by the rather large code footprint.
I also considered PCRE; unfortunately, their Unicode support was still experimental at the time, and it's based on UTF-8 encoded strings rather than UCS-2 wide character strings and I needed UCS-2. It's unfortunate because it is relatively small and it's supposed to be a very fast library. Oh, well.
Finally, there are articles on CodeProject about the same subject. They provide tutorials for different libraries. You may want to look at those for alternative solutions.
Conclusion
We have seen a short tutorial on how to use the regular expression package provided with this article. Also, we've seen how to use the C++ two classes provided as example wrappers around the package.
From the comments on the regular expression syntax, it should be clear by now that this is not the most complete, nor the fastest, library available. However, it's simple, easy to understand, portable, and small. If you're looking for any of those criteria over completeness and speed, this library will fit your needs better.
I hope you'll enjoy using this as much as I enjoyed tweaking its code.