VMware Workstation反虚拟机检测设置方法

以下方法测试适合16.X，非原创

方法一：

1. 复制以下代码添加到wmx文件

isolation.tools.getPtrLocation.disable = “TRUE”
isolation.tools.setPtrLocation.disable = “TRUE”
isolation.tools.setVersion.disable = “TRUE”
isolation.tools.getVersion.disable = “TRUE”
monitor_control.disable_directexec = “TRUE”
monitor_control.disable_chksimd = “TRUE”
monitor_control.disable_ntreloc = “TRUE”
monitor_control.disable_selfmod = “TRUE”
monitor_control.disable_reloc = “TRUE”
monitor_control.disable_btinout = “TRUE”
monitor_control.disable_btmemspace = “TRUE”
monitor_control.disable_btpriv = “TRUE”
monitor_control.disable_btseg = “TRUE”
monitor_control.restrict_backdoor = “TRUE”
monitor_control.virtual_rdtsc = “false”
disable_acceleration = TRUE

2. 虚拟机设置 – 处理器 – 虚拟化引擎
首选模式：最后一项最长的

3. 安装 VMware Tools ，备份出显卡驱动inf文件，并把其中的

DiskID = “VMware Tools”
CompanyName = “VMware, Inc.”
SVGA = “VMware SVGA II”

修改为

DiskID = “NVIDIA Windows Driver Library Installation”
CompanyName = “NVIDIA”
SVGA = “GeForce GTX 660″

方法二：

修改wmx文件

monitor.vintual_mmu = automatic”
monitor.virtual_exec = “automatic”
board-id.reflectHost = “TRUE”
hw.model.reflectHost = “TRUE”
isolation.tools.getPtrLocation.disable = “TRUE”
isolation.tools.setPtrLocation.disable = “TRUE”
isolation.tools.setVersion.disable = “TRUE”
isolation.tools.getVersion.disable = “TRUE”
monitor_control.disable_directexec = “TRUE”
monitor_control.disable_chksimd = “TRUE”
monitor_control.disable_ntreloc = “TRUE”
monitor_control.disable_selfmod = “TRUE”
monitor_control.disable_reloc = “TRUE”
monitor_control.disable_btinout = “TRUE”
monitor_control.disable_btmemspace = “TRUE”
monitor_control.disable_btpriv = “TRUE”
monitor_control.disable_btseg = “TRUE”
monitor_control.virtual_rdtsc = “false”
hypervisor.cpuid.v0 = “FALSE”
Ecx = 7ED8320B
Edx = 178BFBFF
cpuid.1.ecx = “0————–0—————-”
cpuid.1.edx = “———–0———0———-”

最后两行cpuid适用于AMD芯片，如果是intel芯片，请修改最后两行为：

cpuid.1.ecx = “00011111101111101110001111111111”
cpuid.1.edx = “10111111111010111111101111111111”