首页 > 系统相关 >Linux磁盘LVM根目录扩容

Linux磁盘LVM根目录扩容

时间:2022-10-11 13:00:37浏览次数:78  
标签:vg Linux dev hello ubuntu LVM 根目录 root PE

Linux磁盘LVM根目录扩容_github


LVM 的基本概念


物理卷 Physical Volume (PV):可以在上面建立卷组的媒介,可以是硬盘分区,也可以是硬盘本身或者回环文件(loopback file)。物理卷包括一个特殊的 header,其余部分被切割为一块块物理区域(physical extents)


卷组 Volume group (VG):将一组物理卷收集为一个管理单元


逻辑卷 Logical volume (LV):虚拟分区,由物理区域(physical extents)组成


物理区域 Physical extent (PE):硬盘可供指派给逻辑卷的最小单位(通常为 4MB)




新建分区


root@hello:~# fdisk /dev/sda


Welcome to fdisk (util-linux 2.34).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.


GPT PMBR size mismatch (209715199 != 629145599) will be corrected by write.
The backup GPT table is not on the end of the device. This problem will be corrected by write.


Command (m for help): n
Partition number (4-128, default 4):
First sector (209713152-629145566, default 209713152):
Last sector, +/-sectors or +/-size{K,M,G,T,P} (209713152-629145566, default 629145566):


Created a new partition 4 of type 'Linux filesystem' and of size 200 GiB.


Command (m for help): p
Disk /dev/sda: 300 GiB, 322122547200 bytes, 629145600 sectors
Disk model: QEMU HARDDISK
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 9FD87B41-A400-4DD9-AE87-C852ACB2854D


Device Start End Sectors Size Type
/dev/sda1 2048 4095 2048 1M BIOS boot
/dev/sda2 4096 2101247 2097152 1G Linux filesystem
/dev/sda3 2101248 209713151 207611904 99G Linux filesystem
/dev/sda4 209713152 629145566 419432415 200G Linux filesystem


Command (m for help): w
The partition table has been altered.
Syncing disks.


root@hello:~#



扩展pv并查看


root@hello:~# pvcreate /dev/sda4
Physical volume "/dev/sda4" successfully created.

root@hello:~# pvdisplay
--- Physical volume ---
PV Name /dev/sda3
VG Name ubuntu-vg
PV Size <99.00 GiB / not usable 0
Allocatable yes (but full)
PE Size 4.00 MiB
Total PE 25343
Free PE 0
Allocated PE 25343
PV UUID DfUNvp-F4D5-J6Rj-sMcS-PqE1-bKf6-2XLfb2


--- Physical volume ---
PV Name /dev/sda4
VG Name ubuntu-vg
PV Size 200.00 GiB / not usable 4.98 MiB
Allocatable yes (but full)
PE Size 4.00 MiB
Total PE 51199
Free PE 0
Allocated PE 51199
PV UUID yeXSs6-mUWY-Q31q-oD0J-yWHA-zPfp-92AKrO


扩展vg并查看


root@hello:~# vgextend ubuntu-vg /dev/sda4
Volume group "ubuntu-vg" successfully extended

root@hello:~# vgdisplay
--- Volume group ---
VG Name ubuntu-vg
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 2
Act PV 2
VG Size 298.99 GiB
PE Size 4.00 MiB
Total PE 76542
Alloc PE / Size 76542 / 298.99 GiB
Free PE / Size 0 / 0
VG UUID QpG0NU-5tPY-q5Bw-mLIu-Axl6-mdtP-19WWq6


扩展lv并查看


root@hello:~# lvextend /dev/ubuntu-vg/ubuntu-lv /dev/sda4
Size of logical volume ubuntu-vg/ubuntu-lv changed from <99.00 GiB (25343 extents) to 298.99 GiB (76542 extents).
Logical volume ubuntu-vg/ubuntu-lv successfully resized.

root@hello:~# lvdisplay
--- Logical volume ---
LV Path /dev/ubuntu-vg/ubuntu-lv
LV Name ubuntu-lv
VG Name ubuntu-vg
LV UUID ODU5p6-8E8i-30tn-3hzs-AifF-iF4Z-HzMuFL
LV Write Access read/write
LV Creation host, time ubuntu-server, 2022-03-29 09:07:30 +0000
LV Status available
# open 1
LV Size 298.99 GiB
Current LE 76542
Segments 2
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0


扩展根文件系统


root@hello:~# resize2fs /dev/ubuntu-vg/ubuntu-lv
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/ubuntu-vg/ubuntu-lv is mounted on /; on-line resizing required
old_desc_blocks = 13, new_desc_blocks = 38
The filesystem on /dev/ubuntu-vg/ubuntu-lv is now 78379008 (4k) blocks long.


若是xfs文件系统,可以使用xfs_growfs命令


root@hello:~# df -hT | grep ubuntu--vg-ubuntu--lv
/dev/mapper/ubuntu--vg-ubuntu--lv ext4 294G 14G 268G 5% /
root@hello:~#


查看块设备的依赖关系



root@hello:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 31.1M 1 loop /snap/snapd/10707
loop1 7:1 0 55.4M 1 loop /snap/core18/1944
loop2 7:2 0 69.9M 1 loop /snap/lxd/19188
sda 8:0 0 300G 0 disk
├─sda1 8:1 0 1M 0 part
├─sda2 8:2 0 1G 0 part /boot
├─sda3 8:3 0 99G 0 part
│ └─ubuntu--vg-ubuntu--lv 253:0 0 299G 0 lvm /
└─sda4 8:4 0 200G 0 part
└─ubuntu--vg-ubuntu--lv 253:0 0 299G 0 lvm /
sr0 11:0 1 1.1G 0 rom
root@hello:~#









​https://www.oiox.cn/​

​https://www.chenby.cn/​

​https://cby-chen.github.io/​

​https://weibo.com/u/5982474121​

​https://www.zhihu.com/people/chen-bu-yun-2​

                                                                                                            ​https://space.bilibili.com/352476552/article​

​https://cloud.tencent.com/developer/column/93230​

​https://www.jianshu.com/u/0f894314ae2c​

​https://www.toutiao.com/c/user/token/MS4wLjABAAAAeqOrhjsoRZSj7iBJbjLJyMwYT5D0mLOgCoo4pEmpr4A/​

GitHub、知乎、思否、简书、腾讯云、哔哩哔哩、今日头条、新浪微博、个人博客、全网可搜《小陈运维》

标签:vg,Linux,dev,hello,ubuntu,LVM,根目录,root,PE
From: https://blog.51cto.com/u_12212643/5746169

相关文章

  • linux包管理器rpm和dpkg的使用说明
    软件包:开源软件刚开始只提供打包好的源代码文件(例如:.tar.gz),用户需要自己使用编译器编译后才能使用。Debian诞生时,管理工具dpkg也就应运而生,可用来管理deb后缀的"包"......
  • Linux 驱动 SPI Flash(W25Q80DV)
    W25Q80DV是Winbond的一款SPIFlash,容量大小为8Mbit。如果还没看W25Q80DV的数据手册,赶紧去看!本文描述的是在i.MX6q硬件平台上添加W25Q80DV芯片(SPI设备),Linux内......
  • Linux下的lua和boost c++的搭建和安装
    先下载lua,boostc++​​http://www.lua.org/versions.html#5.2​​​​http://www.boost.org/​​ ​​http://sourceforge.net/projects/luabind/​​1.安装lua[root@l......
  • linux安装tomcat
    tomcat下载地址:https://tomcat.apache.org/下载并解压到任意目录,我解压到了/usr/local/tomecat目录下jdk下载地址:http://www.oracle.com/technetwork/java/javase/downlo......
  • Linux“桥接”和“NAT”方式区别
    1.根据图片显示 2.总的来说桥接模式  通过使用物理机网卡具有单独ip vm与pc在同一局域网资源共享 不安全  地址可能不够用NAT 把物理机为路由器......
  • Linux
    linux平台:操作系统。Linux:林纳斯。开源免费,流畅,小巧,安全,稳定。服务器系统。CentOS:7Ubuntu:界面酷炫著称。个人电脑。大数据领域。Windows也有服务器版本,WindowsServer......
  • Linux 在线环境
    JS/UIX–Terminal地址:https://www.masswerk.at/jsuix/index.html进入后,点击openterminal即可。它提供非常简单的终端环境,而且没有自带gcc等编译套件,不过练习基本......
  • Linux 安装Httpd服务
    安装Httpd服务版本说明:CentOS7以上,默认系统是httpd2.4,CentOS6版默认为httpd2.2Ubuntu18.04默认Apache/2.4.29范例:CentOS8安装httpd[root@CentOS8~]#yum......
  • springboot H2 linux下搭建使用
    这次研究是H2数据库了,关键还是再Linux下进行搭建部署的,被这个数据库快弄死了弄了4天时间,现在大致可以用了,还有些细节需要修正。我这边使用的是springboot集成模式。直接使......
  • Linux中$#,$0,$1,$2,$@,$*,$$,$? 的含义
    Linux中$#,$0,$1,$2,$@,$*,$$,$?的含义$#是传给脚本的参数个数$0是脚本本身的文件名$1是脚本后接的第一个参数$2是脚本后接的第二个参数$@是传给脚本......