首页 > 数据库 >一键部署MySQL8+keepalived双主热备高可用

一键部署MySQL8+keepalived双主热备高可用

时间：2022-12-09 11:35:07浏览次数：44  
标签：MySQL8 Keepalived MYSQL keepalived 192.168 双主热备 mysql home config

概述

本次的文章会格外的长，网上大多的配置流程已经不可使用，本篇文章可以称为保姆级教程，而且通过shell脚本大大减少了部署mysql主从，双主的工作量。

img

如上图，VIP地址为192.168.10.100，如果主机192.168.10.129挂了，会自动切换到备机192.168.10.130上，由于是双主，数据可以进行同步恢复

部署流程大致为

  1. 在192.168.10.129服务器上部署docker、mysql一主一丛
  2. 在192.168.10.130服务器上部署docker、mysql一主一丛
  3. 192.168.10.129的Master1数据库和192.168.10.130的数据库互为主从
  4. 在两台服务器上安装keeplived形成高可用

部署流程

配置第一台Master

部署Master

准备Master配置文件my.cnf

mkdir /home/mysql_config
mkdir /home/mysql_config/master1
mkdir /home/mysql_config/master1/config
touch /home/mysql_config/master1/config/my.cnf
chmod +x /home/mysql_config/master1/config/my.cnf

cat > /home/mysql_config/master1/config/my.cnf <<EOF
[mysqld]
server_id=110
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master1
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON
enforce_gtid_consistency=ON
gtid_mode=ON

plugin-load="rpl_semi_sync_source=semisync_source.so;rpl_semi_sync_replica=semisync_replica.so"
#rpl_semi_sync_source_enabled=ON
#rpl_semi_sync_replica_enabled=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

运行Master

会自动下载最新版mysql

docker run -d --name mysql_master1 -p 3306:3306 -e MYSQL_ROOT_PASSWORD=admin123456 -e TZ="Asia/Shanghai" -v /home/mysql_config/master1/config:/etc/mysql/conf.d mysql --authentication_policy=mysql_native_password

启动半同步插件

此步主要是为了将#rpl_semi_sync_source_enabled=ON和#rpl_semi_sync_replica_enabled=ON的井号去掉

mysql会检测semisync_source.so和semisync_replica.so插件的情况，如果没有安装就不能设置rpl_semi_sync_source_enabled和rpl_semi_sync_replica_enabled

cat > /home/mysql_config/master1/config/my.cnf <<EOF
[mysqld]
server_id=110
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master1
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON
enforce_gtid_consistency=ON
gtid_mode=ON

plugin-load="rpl_semi_sync_source=semisync_source.so;rpl_semi_sync_replica=semisync_replica.so"
rpl_semi_sync_source_enabled=ON
rpl_semi_sync_replica_enabled=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

重新开启

docker restart mysql_master1
docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "show variables like 'rpl_semi_sync_%';"
+---------------------------------------------+------------+
| Variable_name                               | Value      |
+---------------------------------------------+------------+
| rpl_semi_sync_replica_enabled               | ON         |
| rpl_semi_sync_replica_trace_level           | 32         |
| rpl_semi_sync_source_enabled                | ON         |
| rpl_semi_sync_source_timeout                | 10000      |
| rpl_semi_sync_source_trace_level            | 32         |
| rpl_semi_sync_source_wait_for_replica_count | 1          |
| rpl_semi_sync_source_wait_no_replica        | ON         |
| rpl_semi_sync_source_wait_point             | AFTER_SYNC |
+---------------------------------------------+------------+

部署Slave

准备Slave配置文件my.cnf

mkdir /home/mysql_config/slave1
mkdir /home/mysql_config/slave1/config
touch /home/mysql_config/slave1/config/my.cnf
chmod +x /home/mysql_config/slave1/config/my.cnf

cat > /home/mysql_config/slave1/config/my.cnf <<EOF
[mysqld]
server_id=120
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master1_slave1
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON     
enforce_gtid_consistency=ON
gtid_mode=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

运行Slave

会自动下载最新版mysql

docker run -d --name mysql_master1_slave1 -p 4306:3306 -e MYSQL_ROOT_PASSWORD=admin123456 -e TZ="Asia/Shanghai" -v /home/mysql_config/slave1/config:/etc/mysql/conf.d mysql --authentication_policy=mysql_native_password

主从配置

安装MySQL客户端

两台Master都需要安装，而且后续keepalived也需要安装

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本，以mysql80-community-release-el8-4.noarch.rpm举例

yum module disable mysql
wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum install mysql-community-client
yum module enable mysql

编写脚本文件

touch /home/mysql_config/mysql_script.sh
chmod +x /home/mysql_config/mysql_script.sh

cat > /home/mysql_config/mysql_script.sh <<'EOF'
#!/bin/bash
MASTER_RPL_USER=rpl_admin
MASTER_RPL_PASSWORD=rpl_admin123456
# master and slaves admin user
ADMIN_USER=root
ADMIN_PASSWORD=admin123456
ALLOW_HOST=%

MASTER_HOST=192.168.10.129
MASTER_PORT=3306
SLAVE_HOST=192.168.10.129
SLAVE_PORT=4306

# master
DROP_USER_SQL="DROP USER '$MASTER_RPL_USER'@'$ALLOW_HOST';"
CREATE_USER_SQL="CREATE USER '$MASTER_RPL_USER'@'$ALLOW_HOST' IDENTIFIED BY '$MASTER_RPL_PASSWORD';"
GRANT_PRIVILEGES_SQL="GRANT REPLICATION SLAVE ON *.* TO '$MASTER_RPL_USER'@'$ALLOW_HOST';"
FLUSH_PRIVILEGES_SQL="FLUSH PRIVILEGES;"

mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$CREATE_USER_SQL"
mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$GRANT_PRIVILEGES_SQL"
mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$FLUSH_PRIVILEGES_SQL"

# master's slave shell
RESULT=`mysql -h$MASTER_HOST -p$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "SHOW MASTER STATUS;" | grep -v grep |tail -n +2| awk '{print $1,$2}'`
LOG_FILE_NAME=`echo $RESULT | grep -v grep | awk '{print $1}'`
LOG_FILE_POS=`echo $RESULT | grep -v grep | awk '{print $2}'`

SYNC_SQL="change master to master_host='$MASTER_HOST', master_port=$MASTER_PORT, master_user='$MASTER_RPL_USER',master_password='$MASTER_RPL_PASSWORD',master_log_file='$LOG_FILE_NAME',master_log_pos=$LOG_FILE_POS;"
START_SYNC_SQL="start REPLICA;"
STATUS_SQL="show REPLICA status\G;"

mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$SYNC_SQL"
mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$START_SYNC_SQL"
mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$STATUS_SQL"
EOF

执行脚本并检查

sh /home/mysql_config/mysql_script.sh
*************************** 1. row ***************************
...
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
...

配置第二台

部署Master

准备Master配置文件my.cnf

mkdir /home/mysql_config
mkdir /home/mysql_config/master2
mkdir /home/mysql_config/master2/config
touch /home/mysql_config/master2/config/my.cnf
chmod +x /home/mysql_config/master2/config/my.cnf

cat > /home/mysql_config/master2/config/my.cnf <<EOF
[mysqld]
server_id=111
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master2
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON
enforce_gtid_consistency=ON
gtid_mode=ON

plugin-load="rpl_semi_sync_source=semisync_source.so;rpl_semi_sync_replica=semisync_replica.so"
#rpl_semi_sync_source_enabled=ON
#rpl_semi_sync_replica_enabled=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

运行Master

会自动下载最新版mysql

docker run -d --name mysql_master2 -p 3306:3306 -e MYSQL_ROOT_PASSWORD=admin123456 -e TZ="Asia/Shanghai" -v /home/mysql_config/master2/config:/etc/mysql/conf.d mysql --authentication_policy=mysql_native_password

启用半同步插件

此步主要是为了将#rpl_semi_sync_source_enabled=ON和#rpl_semi_sync_replica_enabled=ON的井号去掉

mysql会检测semisync_source.so和semisync_replica.so插件的情况，如果没有安装就不能设置rpl_semi_sync_source_enabled和rpl_semi_sync_replica_enabled

cat > /home/mysql_config/master2/config/my.cnf <<EOF
[mysqld]
server_id=111
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master2
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON
enforce_gtid_consistency=ON
gtid_mode=ON

plugin-load="rpl_semi_sync_source=semisync_source.so;rpl_semi_sync_replica=semisync_replica.so"
rpl_semi_sync_source_enabled=ON
rpl_semi_sync_replica_enabled=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

重新开启

docker restart mysql_master2
docker exec -it mysql_master2 mysql -uroot -padmin123456 -e "show variables like 'rpl_semi_sync_%';"
+---------------------------------------------+------------+
| Variable_name                               | Value      |
+---------------------------------------------+------------+
| rpl_semi_sync_replica_enabled               | ON         |
| rpl_semi_sync_replica_trace_level           | 32         |
| rpl_semi_sync_source_enabled                | ON         |
| rpl_semi_sync_source_timeout                | 10000      |
| rpl_semi_sync_source_trace_level            | 32         |
| rpl_semi_sync_source_wait_for_replica_count | 1          |
| rpl_semi_sync_source_wait_no_replica        | ON         |
| rpl_semi_sync_source_wait_point             | AFTER_SYNC |
+---------------------------------------------+------------+

部署Slave

准备Slave配置文件my.cnf

mkdir /home/mysql_config/slave2
mkdir /home/mysql_config/slave2/config
touch /home/mysql_config/slave2/config/my.cnf
chmod +x /home/mysql_config/slave2/config/my.cnf

cat > /home/mysql_config/slave2/config/my.cnf <<EOF
[mysqld]
server_id=121
user=mysql
character-set-server=utf8mb4
collation-server=utf8mb4_general_ci
default-authentication-plugin=mysql_native_password
max_connections=800
max_connect_errors=1000

log_bin=mysql_binlog_master2_slave2
slow_query_log=ON
slow_query_log_file=/var/lib/mysql/slow.log

log_error=/var/lib/mysql/mysql.err
log_replica_updates=ON     
enforce_gtid_consistency=ON
gtid_mode=ON

binlog-ignore-db=information_schema
binlog-ignore-db=mysql
binlog-ignore-db=sys
binlog-ignore-db=performance_schema

[client]
default-character-set=utf8mb4
EOF

运行Slave

会自动下载最新版mysql

docker run -d --name mysql_master2_slave2 -p 4306:3306 -e MYSQL_ROOT_PASSWORD=admin123456 -e TZ="Asia/Shanghai" -v /home/mysql_config/slave2/config:/etc/mysql/conf.d mysql --authentication_policy=mysql_native_password

主从配置

安装MySQL客户端

两台Master都需要安装，而且后续keepalived也需要安装

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本，以mysql80-community-release-el8-4.noarch.rpm举例

yum module disable mysql
wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum install mysql-community-client
yum module enable mysql

编写脚本文件

touch /home/mysql_config/mysql_script.sh
chmod +x /home/mysql_config/mysql_script.sh

cat > /home/mysql_config/mysql_script.sh <<'EOF'
#!/bin/bash
MASTER_RPL_USER=rpl_admin
MASTER_RPL_PASSWORD=rpl_admin123456
# master and slaves admin user
ADMIN_USER=root
ADMIN_PASSWORD=admin123456
ALLOW_HOST=%

MASTER_HOST=192.168.10.130
MASTER_PORT=3306
SLAVE_HOST=192.168.10.130
SLAVE_PORT=4306

# master
DROP_USER_SQL="DROP USER '$MASTER_RPL_USER'@'$ALLOW_HOST';"
CREATE_USER_SQL="CREATE USER '$MASTER_RPL_USER'@'$ALLOW_HOST' IDENTIFIED BY '$MASTER_RPL_PASSWORD';"
GRANT_PRIVILEGES_SQL="GRANT REPLICATION SLAVE ON *.* TO '$MASTER_RPL_USER'@'$ALLOW_HOST';"
FLUSH_PRIVILEGES_SQL="FLUSH PRIVILEGES;"

mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$CREATE_USER_SQL"
mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$GRANT_PRIVILEGES_SQL"
mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "$FLUSH_PRIVILEGES_SQL"

# master's slave shell
RESULT=`mysql -h$MASTER_HOST -p$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "SHOW MASTER STATUS;" | grep -v grep |tail -n +2| awk '{print $1,$2}'`
LOG_FILE_NAME=`echo $RESULT | grep -v grep | awk '{print $1}'`
LOG_FILE_POS=`echo $RESULT | grep -v grep | awk '{print $2}'`

SYNC_SQL="change master to master_host='$MASTER_HOST', master_port=$MASTER_PORT, master_user='$MASTER_RPL_USER',master_password='$MASTER_RPL_PASSWORD',master_log_file='$LOG_FILE_NAME',master_log_pos=$LOG_FILE_POS;"
START_SYNC_SQL="start REPLICA;"
STATUS_SQL="show REPLICA status\G;"

mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$SYNC_SQL"
mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$START_SYNC_SQL"
mysql -h$SLAVE_HOST -P$SLAVE_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$STATUS_SQL"
EOF

执行脚本并检查

sh /home/mysql_config/mysql_script.sh
*************************** 1. row ***************************
...
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
...

双主配置

Master1作为主，Master2作为备份

Master1的IP地址为：192.168.10.129
Master2的IP地址为：192.168.10.130

安装MySQL客户端

两台Master都需要安装，而且后续keepalived也需要安装

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本，以mysql80-community-release-el8-4.noarch.rpm举例

yum module disable mysql
wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum install mysql-community-client
yum module enable mysql

编写配置文件

touch /home/mysql_config/rplShell.sh
chmod +x /home/mysql_config/rplShell.sh

cat > /home/mysql_config/rplShell.sh <<'EOF'
#!/bin/bash
MASTER_RPL_USER=rpl_admin
MASTER_RPL_PASSWORD=rpl_admin123456
# master and slaves admin user
ADMIN_USER=root
ADMIN_PASSWORD=admin123456

MASTER_HOST=192.168.10.130
MASTER_PORT=3306
BACKUP_HOST=192.168.10.129
BACKUP_PORT=3306

RESULT=`mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "SHOW MASTER STATUS;" | grep -v grep |tail -n +2| awk '{print $1,$2}'`
LOG_FILE_NAME=`echo $RESULT | grep -v grep | awk '{print $1}'`
LOG_FILE_POS=`echo $RESULT | grep -v grep | awk '{print $2}'`

SYNC_SQL="change master to master_host='$MASTER_HOST', master_port=$MASTER_PORT, master_user='$MASTER_RPL_USER',master_password='$MASTER_RPL_PASSWORD',master_log_file='$LOG_FILE_NAME',master_log_pos=$LOG_FILE_POS;"
START_SYNC_SQL="start REPLICA;"
STATUS_SQL="show REPLICA status\G;"

mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$SYNC_SQL"
mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$START_SYNC_SQL"
mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$STATUS_SQL"
EOF

执行脚本并检查

sh /home/mysql_config/rplShell.sh
*************************** 1. row ***************************
...
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
...

Master2作为主，Master1作为备份

Master1的IP地址为：192.168.10.129
Master2的IP地址为：192.168.10.130

安装MySQL客户端

两台Master都需要安装，而且后续keepalived也需要安装

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本，以mysql80-community-release-el8-4.noarch.rpm举例

yum module disable mysql
wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum install mysql-community-client
yum module enable mysql

编写配置文件

touch /home/mysql_config/rplShell.sh
chmod +x /home/mysql_config/rplShell.sh

cat > /home/mysql_config/rplShell.sh <<'EOF'
#!/bin/bash
MASTER_RPL_USER=rpl_admin
MASTER_RPL_PASSWORD=rpl_admin123456
# master and slaves admin user
ADMIN_USER=root
ADMIN_PASSWORD=admin123456

MASTER_HOST=192.168.10.129
MASTER_PORT=3306
BACKUP_HOST=192.168.10.130
BACKUP_PORT=3306

RESULT=`mysql -h$MASTER_HOST -P$MASTER_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e "SHOW MASTER STATUS;" | grep -v grep |tail -n +2| awk '{print $1,$2}'`
LOG_FILE_NAME=`echo $RESULT | grep -v grep | awk '{print $1}'`
LOG_FILE_POS=`echo $RESULT | grep -v grep | awk '{print $2}'`

SYNC_SQL="change master to master_host='$MASTER_HOST', master_port=$MASTER_PORT, master_user='$MASTER_RPL_USER',master_password='$MASTER_RPL_PASSWORD',master_log_file='$LOG_FILE_NAME',master_log_pos=$LOG_FILE_POS;"
START_SYNC_SQL="start REPLICA;"
STATUS_SQL="show REPLICA status\G;"

mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$SYNC_SQL"
mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$START_SYNC_SQL"
mysql -h$BACKUP_HOST -P$BACKUP_PORT -u"$ADMIN_USER" -p"$ADMIN_PASSWORD" -e"$STATUS_SQL"
EOF

执行脚本并检查

sh /home/mysql_config/rplShell.sh
*************************** 1. row ***************************
...
             Slave_IO_Running: Yes
            Slave_SQL_Running: Yes
...

配置Keepalived

Master1主机配置

安装keepalived

yum install -y keepalived

编写keepalived配置文件

cat > /etc/keepalived/keepalived.conf <<'EOF'
! Configuration File for keepalived

global_defs {
    router_id HA-M1
    script_user root
}

vrrp_script chk_mysql {
    script /etc/keepalived/chk_mysql.sh
    interval 3
    fall 3
    rise 2
}

vrrp_instance VI_MYSQL {
    state MASTER
    interface ens160
    virtual_router_id 100
    priority 100
    advert_int 1
    unicast_src_ip  192.168.10.129
    unicast_peer {
            192.168.10.130
    }
    
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    
    virtual_ipaddress {
        192.168.10.100/24 dev ens160 label ens160:vip
    }
    
    track_script {
        chk_mysql
    }
}
EOF
  • router_id：标识，两台需不一样
  • state MASTER：表明这台是Master角色
  • priority：优先级，MASTER角色比BACKUP高
  • virtual_router_id：虚拟路由编号，两台需要一致，两个节点不能一样
  • 192.168.10.100 dev ens32 label ens32:vip：VIP地址—192.168.10.100
  • script /etc/keepalived/chk_mysql.sh：MySQL的检测脚本，定时去检测MySQL进程是否挂掉，会重启，interval是为间隔时间（2s检测一次）

当Keepalived从BACKUP提升为MASTER时，那么VIP就会漂移到自己身上，这个时候我们只需要将Slave挂载在自己身上即可

MySQL状态监测脚本

安装MySQL客户端

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本，以mysql80-community-release-el8-4.noarch.rpm举例

wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum module disable mysql
yum install mysql-community-client
yum module enable mysql

配置Keepalived的MySQL状态监测脚本

touch /etc/keepalived/chk_mysql.sh
chmod +x /etc/keepalived/chk_mysql.sh

cat > /etc/keepalived/chk_mysql.sh <<'EOF'
#!/bin/bash
MYSQL=/usr/bin/mysql
MYSQL_HOST=192.168.10.129
MYSQL_USER=root
MYSQL_PASSWORD=admin123456
CHECK_TIME=3
  
#mysql  is working MYSQL_OK is 1 , mysql down MYSQL_OK is 0
  
MYSQL_OK=1
  
function check_mysql_helth (){
    $MYSQL -h $MYSQL_HOST -u$MYSQL_USER -p${MYSQL_PASSWORD} -e "show status;" >/dev/null 2>&1
    if [ $? = 0 ] ;then
    MYSQL_OK=1
    else
    MYSQL_OK=0
    fi
    return $MYSQL_OK
}
while [ $CHECK_TIME -ne 0 ]
do
    let "CHECK_TIME -= 1"
    check_mysql_helth
if [ $MYSQL_OK = 1 ] ; then
    CHECK_TIME=0
    exit 0
fi
if [ $MYSQL_OK -eq 0 ] &&  [ $CHECK_TIME -eq 0 ]
then
    systemctl stop keepalived
    exit 1
fi
sleep 1
done
EOF

Master2备机配置

安装keepalived

yum install -y keepalived

编写keepalived配置文件

cat > /etc/keepalived/keepalived.conf <<'EOF'
! Configuration File for keepalived

global_defs {
    router_id HA-M2
    script_user root
}

vrrp_script chk_mysql {
    script /etc/keepalived/chk_mysql.sh
    interval 3
    fall 3
    rise 2
}

vrrp_instance VI_MYSQL {
    state BACKUP
    interface ens160
    virtual_router_id 100
    nopreempt
    priority 50
    advert_int 1
    unicast_src_ip  192.168.10.130
    unicast_peer {
            192.168.10.129
    }
    
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    
    virtual_ipaddress {
        192.168.10.100/24 dev ens160 label ens160:vip
    }
    
    track_script {
        chk_mysql
    }
}
EOF

注意router_id需要不一样，state BACKUP表明是备机，virtual_router_id需要一致，priority要比MASTER低！

chk_mysql.sh内容如下，可以看到可以根据当前Keepalived的状态分别处理，但是此处的处理都是启动MySQL（如果MySQL进程已退出）

MySQL状态监测脚本

安装MySQL客户端

在网站查询https://dev.mysql.com/downloads/repo/yum/要安装的mysql版本，以mysql80-community-release-el8-4.noarch.rpm举例

wget https://dev.mysql.com/get/mysql80-community-release-el8-4.noarch.rpm
rpm -ivh mysql80-community-release-el8-4.noarch.rpm
yum module disable mysql
yum install mysql-community-client
yum module enable mysql

配置Keepalived的MySQL状态监测脚本

touch /etc/keepalived/chk_mysql.sh
chmod +x /etc/keepalived/chk_mysql.sh

cat > /etc/keepalived/chk_mysql.sh <<'EOF'
#!/bin/bash
MYSQL=/usr/bin/mysql
MYSQL_HOST=192.168.10.130
MYSQL_USER=root
MYSQL_PASSWORD=admin123456
CHECK_TIME=3
  
#mysql  is working MYSQL_OK is 1 , mysql down MYSQL_OK is 0

MYSQL_OK=1
  
function check_mysql_helth (){
    $MYSQL -h $MYSQL_HOST -u$MYSQL_USER -p${MYSQL_PASSWORD} -e "show status;" >/dev/null 2>&1
    if [ $? = 0 ] ;then
    MYSQL_OK=1
    else
    MYSQL_OK=0
    fi
    return $MYSQL_OK
}
while [ $CHECK_TIME -ne 0 ]
do
    let "CHECK_TIME -= 1"
    check_mysql_helth
if [ $MYSQL_OK = 1 ] ; then
    CHECK_TIME=0
    exit 0
fi
if [ $MYSQL_OK -eq 0 ] &&  [ $CHECK_TIME -eq 0 ]
then
    systemctl stop keepalived
    exit 1
fi
sleep 1
done
EOF

启动Keepalived

最后在Master1和Master2分别启动Keepalived

systemctl start keepalived

查看Master1网络配置

ifconfig
ens160: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.10.129  netmask 255.255.255.0  broadcast 192.168.10.255
        inet6 fe80::20c:29ff:fe23:aab2  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:23:aa:b2  txqueuelen 1000  (Ethernet)
        RX packets 4797  bytes 524410 (512.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2860  bytes 332307 (324.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens160:vip: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.10.100  netmask 255.255.255.255  broadcast 0.0.0.0
        ether 00:0c:29:23:aa:b2  txqueuelen 1000  (Ethernet)

查看Master2网络配置

ens160: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.10.130  netmask 255.255.255.0  broadcast 192.168.10.255
        inet6 fe80::20c:29ff:feb4:3ede  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:b4:3e:de  txqueuelen 1000  (Ethernet)
        RX packets 4672  bytes 2048171 (1.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2703  bytes 275576 (269.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

主机上有ens160:vip而备机上没有vip

Keepalived可能会遇到的问题

  1. 主机能启动，备机不能启动
    1. 关闭防火墙
    2. 两台机器的网卡uuid是否冲突（如果是vm ware复制的linux，因为网卡uuid一致导致的）
  2. 主机和备机keepalived都为master，有两种方法
    • 关闭防火墙，或设置组播ip可用
    • 两端keepalived设置为单播（使用unicast_src_ip ）

测试

数据同步测试

进入Master1，创建数据库test_db，表test_user ，并插入一条数据。

docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "CREATE DATABASE test_db;"
docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "CREATE TABLE test_db.test_user (id INT(11),name VARCHAR(25),age int(11) );"
docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "INSERT INTO test_db.test_user values (1,'zhangsan',18);"
docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"

查看Master1及从库master1_slave1、 查看Master2及从库master2_slave2的数据同步情况

docker exec -it mysql_master1 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"
+------+----------+------+
| id   | name     | age  |
+------+----------+------+
|    1 | zhangsan |   18 |
+------+----------+------+

docker exec -it mysql_master1_slave1 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"
+------+----------+------+
| id   | name     | age  |
+------+----------+------+
|    1 | zhangsan |   18 |
+------+----------+------+

docker exec -it mysql_master2 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"
+------+----------+------+
| id   | name     | age  |
+------+----------+------+
|    1 | zhangsan |   18 |
+------+----------+------+

docker exec -it mysql_master2_slave2 mysql -uroot -padmin123456 -e "SELECT * FROM test_db.test_user;"
+------+----------+------+
| id   | name     | age  |
+------+----------+------+
|    1 | zhangsan |   18 |
+------+----------+------+

高可用测试

启用备机测试

停止主机上的mysql

docker stop mysql_master1

主机上的Keepalived状态

Keepalived[4213]: Stopping
Keepalived_vrrp[4214]: (VI_MYSQL) sent 0 priority
Keepalived_vrrp[4214]: (VI_MYSQL) removing VIPs.

备机的Keepalived状态

Keepalived_vrrp[8986]: (VI_MYSQL) Backup received priority 0 advertisement
Keepalived_vrrp[8986]: (VI_MYSQL) Receive advertisement timeout
Keepalived_vrrp[8986]: (VI_MYSQL) Entering MASTER STATE
Keepalived_vrrp[8986]: (VI_MYSQL) setting VIPs.
Keepalived_vrrp[8986]: (VI_MYSQL) Sending/queueing gratuitous ARPs on ens160 for 192.168.10.100

注意
Master备机上做写操作，第一次写会发生半同步等待（10s左右），第二次写会退化成异步复制

主机恢复测试

启动主机上的mysql和keepalived

docker start mysql_master1
systemctl start keepalived

主机上的Keepalived状态

Keepalived_vrrp[5413]: (VI_MYSQL) Entering BACKUP STATE
Keepalived_vrrp[5413]: VI_MYSQL: sending gratuitous ARP for 192.168.10.129
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.129
Keepalived_vrrp[5413]: (VI_MYSQL) received lower priority (50) advert from 192.168.10.130 - discarding
Keepalived_vrrp[5413]: (VI_MYSQL) received lower priority (50) advert from 192.168.10.130 - discarding
Keepalived_vrrp[5413]: (VI_MYSQL) received lower priority (50) advert from 192.168.10.130 - discarding
Keepalived_vrrp[5413]: (VI_MYSQL) Receive advertisement timeout
Keepalived_vrrp[5413]: (VI_MYSQL) Entering MASTER STATE
Keepalived_vrrp[5413]: (VI_MYSQL) setting VIPs.
Keepalived_vrrp[5413]: (VI_MYSQL) Sending/queueing gratuitous ARPs on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100
Keepalived_vrrp[5413]: Sending gratuitous ARP on ens160 for 192.168.10.100

备机的Keepalived状态

Keepalived_vrrp[8986]: (VI_MYSQL) Master received advert from 192.168.10.129 with higher priority 100, ours 50
Keepalived_vrrp[8986]: (VI_MYSQL) Entering BACKUP STATE
Keepalived_vrrp[8986]: (VI_MYSQL) removing VIPs.

结论

如果杀掉主机上的mysql

  • VIP会漂移到备机上，ifconfig能看到VIP信息
  • 备机的Keepalived从BACKUP状态转换为了MASTER状态
  • Master备机上做写操作，第一次写会发生半同步等待（10s左右），第二次写会退化成异步复制

恢复主机mysql

  • ifconfig看下VIP会漂移回来，并且备机上的VIP会消失
  • 刚才在Master备机上写入的数据同步过来了
  • Keepalived的状态是从FAULT转变为BACKUP，最后变成MASTER

标签：MySQL8,Keepalived,MYSQL,keepalived,192.168,双主热备,mysql,home,config
From： https://www.cnblogs.com/reim/p/16968346.html

相关文章

  • Nginx_高可用配置（keepalived+nginx主从热备双机架构）！
    系统版本Centos7IP：192.168.8.145MasterIP：192.168.8.150Slave一.Linux安装nginx(主从都安装NGINX)1.安装依赖[root@Master~]#yum-yinstallgcczlibzlib-devel......
  • 绿色版MySQL8.0.26安装流程
    下载 5.7 8.0 官网 https://dev.mysql.com/downloads/mysql/ 国内镜像网站 https://developer.aliyun.com/mirror/ ​ windows安装数据库 安装版： .......
  • keepalived 启动报错 PID file /var/run/keepalived.pid not readable (yet?) after s
    语法格式：journalctl[参数]常用参数：-k 查看内核日志-b 查看系统本次启动的日志-u 查看指定服务的日志-n 指定日志条数-f 追踪日志--disk-usage 查看当前日志占用磁......
  • Centos7上使用yum安装mysql8.x
    文章目录​​前言​​​​一、官方文档​​​​二、安装步骤​​​​1.安装MySQLYumRepository​​​​2.选择要安装的版本​​​​3.检查rpm的签名​​​​4.安装Mysql​......
  • MySQL8.0的caching_sha2_password问题
    问题描述及分析安装MySQL8.0后，使用MySQLWorkbench登录时报以下错误分析及查找相关资料后，发现MySQL8.0采用了新的更安全的验证方式，详情请查看​​mysql-8-0-4-new-default-......
  • windows下MySQL5和Mysql8共存
    下载MYSQL压缩包mysql8下载地址:https://dev.mysql.com/downloads/mysql/mysql5下载地址:https://downloads.mysql.com/archives/community/建议选择下载压缩版本的,......
  • Mysql8.0.25安装过程
    步骤一.下载mysql8.0.25步骤二.下载完解压后如下图:  图片中显示可知,并没有exe用来安装,那么请看第三步步骤三.创建一个txt文本文件,将下边的......
  • mysql8 postgresql 递归查询一条SQL支持帝国查询
    创建表点击查看代码createtabletb(idvarchar(3),pidvarchar(3),namevarchar(10));insertintotbvalues('002',0,'浙江省');insertintotbvalues......
  • docker 安装mysql8
    1.环境准备1.centos7  2.安装包下载1.百度网盘下载链接：https://pan.baidu.com/s/1AfRUkiXD9Oee1hA5az9SXg提取码：gs7b 2.版本说明此安装包为dockermysql8......
  • mysql8 添加用户，赋予表操作权限
    1.mysql8修改了安全规则，不能像mysql5.7一次性创建用户并授权，需要分批创建1.创建用户createuser'username'@'host'identifiedby'password'创建用户说明：1.use......

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99