首页 > 编程语言 >RationalDMIS2023量块程序2023

RationalDMIS2023量块程序2023

时间：2023-10-06 10:05:51浏览次数：41  
标签：ERROR1 RationalDMIS2023 GOTO 2023 HEIGHT FA ENDIF 量块 ASSIGN


RationalDMIS2023量块程序2023_数据库


RationalDMIS2023量块程序2023_网络_02

DECL/LOCAL, REAL, LPEND,HEIGHT, TOLERROR,LL,CRDVCE,PROBVCE
DECL/LOCAL, CHAR, 20, BARAXIS,PROB,ANS
DECL/COMMON,DOUBLE,DR_PRBRAD,PRO_APPRCH,PRO_RETRCT,MSVEL
DECL/COMMON, DOUBLE, VI, VJ, VK, VI2, VJ2, VK2, DCX, DCY, DCZ, DX, DY, DZ, BARDIR, DMAX, DMIN
DECL/COMMON, DOUBLE, GAGEHEIGHT, GAGEWIDTH, ENDCLEAR,STD
DECL/COMMON, DOUBLE, ZGAP[5], XGAP[5], BLENGTH[5], ZP, XP, BL
DECL/COMMON,INTGR,TXTOUTPUT,LOOP
PRO_APPRCH = VALUE/SNSET,APPRCH
PRO_RETRCT = VALUE/SNSET,RETRCT
IF/(PRO_APPRCH .GT. 4) .OR. (PRO_RETRCT .GT. 4)
TEXT/OPER, '请确认接近、回退距离是否正常'
ENDIF

$$ do..loop<<<循环测量次数>>>为3,可以根据实际需要修改循环测量次数
LPEND = ASSIGN/10

$$ HEIGHT抬高的<<<安全距离>>>为43，可以根据实际情况修改此数值
HEIGHT = ASSIGN/33

$$<<<机器设计精度>>>，允许误差(u)，精度步长
TOLERROR = ASSIGN/1.8
LL= ASSIGN/300

$$ <<<是否需要输出TXT报告>>>  =0 不输出，  =1 输出
TXTOUTPUT = ASSIGN/0

$$ <<<块规的长度>>>，500，400，300，200，30，可以自行修改
BLENGTH[1] = ASSIGN/125
BLENGTH[2] = ASSIGN/100
BLENGTH[3] = ASSIGN/50
BLENGTH[4] = ASSIGN/30
BLENGTH[5] = ASSIGN/25

$$ XGAP表示<<<块规之间的端面距离>>>，请查看 GageBlock.JPG 图片里的图解
XGAP[1] = ASSIGN/0
XGAP[2] = ASSIGN/0
XGAP[3] = ASSIGN/0
XGAP[4] = ASSIGN/0
XGAP[5] = ASSIGN/2

$$ ZGAP表示<<<块规间距>>>，请查看 GageBlock.JPG 图片里的图解
ZGAP[1] = ASSIGN/0
ZGAP[2] = ASSIGN/ZGAP[1] + 21.6
ZGAP[3] = ASSIGN/ZGAP[1] + 43.2
ZGAP[4] = ASSIGN/ZGAP[1] + 64.8
ZGAP[5] = ASSIGN/ZGAP[1] + 86.4

$$-----<<<量块端面长宽>>>-----------------------------------------------------
GAGEHEIGHT = ASSIGN/37
GAGEWIDTH  = ASSIGN/9
ENDCLEAR   = ASSIGN/2.5

KNPTR1 = PROMPT/TITLE,'请确认是否要手动定位量块坐标',TEXT,'START CNC MEASUREMENT [ Y/N ]',EDIT,ANS
$$ANS = PROMPT/'START CNC MEASUREMENT [ Y/N ]  '
IF/(ANS .EQ. 'Y')
   PRCOMP/OFF
  JUMPTO/(CNCSTART)
  ENDIF
RECALL/D(MCS)
UNITS/MM,ANGDEC
PRCOMP/OFF
MODE/MAN
F(PTL1)=FEAT/POINT,CART,1 ,0, 0, 0, 0, 1
F(PTL2)=FEAT/POINT,CART,2 ,0, 0, 0, 0, 1
F(PTL3)=FEAT/POINT,CART,3 ,0, 0, 0, 0, 1
F(PTL4)=FEAT/POINT,CART,4 ,0, 0, 0, 0, 1
F(PTL5)=FEAT/POINT,CART,5 ,0, 0, 0, 0, 1
F(PTL6)=FEAT/POINT,CART,6 ,0, 0, 0, 0, 1

MEAS/POINT,F(PTL1),1
ENDMES
MEAS/POINT,F(PTL2),1
ENDMES
MEAS/POINT,F(PTL3),1
ENDMES
MEAS/POINT,F(PTL4),1
ENDMES
MEAS/POINT,F(PTL5),1
ENDMES
MEAS/POINT,F(PTL6),1
ENDMES

(CNCSTART)

MODE/PROG,MAN

VI = OBTAIN/FA(PTL1)[1],5
VJ = OBTAIN/FA(PTL1)[1],6
VK = OBTAIN/FA(PTL1)[1],7
F(BFPL1) = FEAT/PLANE,CART, 0.0, 0.0, 0.0, VI, VJ, VK
VI = OBTAIN/FA(PTL5)[1],5
VJ = OBTAIN/FA(PTL5)[1],6
VK = OBTAIN/FA(PTL5)[1],7
VI2 = OBTAIN/FA(PTL4)[1],5
VJ2 = OBTAIN/FA(PTL4)[1],6
VK2 = OBTAIN/FA(PTL4)[1],7
F(BFLN1) = FEAT/LINE,BND,CART, 0, 0, 0, -VI2, -VJ2, -VK2, VI, VJ, VK
CONST/PLANE,F(BFPL1),BF,FA(PTL1),FA(PTL2),FA(PTL3)
CONST/LINE,F(BFLN1),BF,FA(PTL5),FA(PTL6)
D(GAGG1CRD) = DATSET/FA(BFPL1), ZDIR, ZORIG, FA(BFLN1), -XDIR, YORIG, FA(PTL4), XORIG
PROB = VALUE/SNSLCT
DR_PRBRAD = OBTAIN/SS(PROB), 8
DR_PRBRAD = ASSIGN/(DR_PRBRAD/2)
D(GAGG1CRD) = TRANS/ZORIG, -DR_PRBRAD, YORIG, -DR_PRBRAD, XORIG, -DR_PRBRAD

DID(DEFAULTSCREEN) = DEVICE/TERM,'SCREENOUTPUT'
OPEN/DID(DEFAULTSCREEN),FDATA,V(DEFAULTFORMAT),OUTPUT
$$ Set.ForeGround.Output
$$ Set.Term.PageBreak

M(GAGECRDSETUP) = MACRO/'CRDLABEL', ADVX, ADVZ, GHEIGHT, GWIDTH, GLENGTH, GCLEAR, PRBR
    RECALL/D(GAGG1CRD)
    D(@CRDLABEL) = TRANS/ZORIG, ADVZ, XORIG, ADVX
    
    $$打开TXT输出器
    IF/(TXTOUTPUT .EQ. 1)
	DID(GageBlock) = DEVICE/STOR,'D:\LBERROR.txt'
	OPEN/DID(GageBlock), DIRECT, OUTPUT, APPEND
	ENDIF
    
	

	MSVEL = VALUE/FEDRAT,POSVEL,FEED  
	FEDRAT/POSVEL, MMPS, MSVEL/2
	DY = VALUE/GOTO, YAXIS
	IF/(DY .LT. HEIGHT)
		DX = VALUE/GOTO, XAXIS
		DZ = VALUE/GOTO, ZAXIS
		GOTO/DX, HEIGHT, DZ
	ENDIF
	GOTO/-GCLEAR, HEIGHT, 5
	FEDRAT/POSVEL, MMPS, MSVEL
	F(ZPLANE) = FEAT/PLANE,CART, 0.0, 0.0, 0.0, 0, 0, 1
	F(XLINE) = FEAT/LINE,BND,CART, 0, 0, 0, 1, 0, 0, 0, 1, 0
	F(XORIG)=FEAT/POINT,CART,6 ,0, 0, 1, 0, 0
	
	MEAS/PLANE,F(ZPLANE), 3
	PTMEAS/CART, -GCLEAR, -(GHEIGHT/16),   0, 0, 0, 1
	PTMEAS/CART, -GCLEAR, -(GHEIGHT*2/10), 0, 0, 0, 1
	GOTO/-3, HEIGHT, 5



	IF/(GLENGTH .EQ. BLENGTH[1])
	GOTO/-(GLENGTH-20), HEIGHT, 5
	PTMEAS/CART, -(GLENGTH-20), -(GHEIGHT/6), 0, 0, 0, 1
	ELSE
	GOTO/-(GLENGTH-GCLEAR), HEIGHT, 5
	PTMEAS/CART, -(GLENGTH-GCLEAR), -(GHEIGHT/6), 0, 0, 0, 1
	ENDIF
	
	ENDMES
	
	MEAS/LINE,F(XLINE), 2
	
	
	IF/(GLENGTH .EQ. BLENGTH[1])
	GOTO/-(GLENGTH-20),HEIGHT, 5
	PTMEAS/CART, -(GLENGTH-20), 0,  -(GWIDTH/2), 0, 1, 0
	GOTO/-(GLENGTH-20), HEIGHT, -(GWIDTH/2)
	ELSE
	GOTO/-GLENGTH,HEIGHT, 5
	PTMEAS/CART, -(GLENGTH-GCLEAR)+3, 0,  -(GWIDTH/2), 0, 1, 0
	GOTO/-(GLENGTH-3), HEIGHT, -(GWIDTH/2)
	ENDIF
	
	GOTO/-5, HEIGHT, -(GWIDTH/2)
	PTMEAS/CART, -GCLEAR-3, 0, -(GWIDTH/2), 0, 1, 0
	ENDMES
				
	GOTO/0, HEIGHT, -(GWIDTH/2)	
	MEAS/POINT,F(XORIG), 1
	PTMEAS/CART, 0, -(GHEIGHT/8), -(GWIDTH/2), 1, 0, 0
	ENDMES
	GOTO/5, HEIGHT, -(GWIDTH/2)
	
	$$(ANS .EQ. 'N') .AND. 	
	IF/(BL .EQ. BLENGTH[1])
	RECALL/D(MCS)
	DX = OBTAIN/FA(XORIG),6
	DY = OBTAIN/FA(XORIG),7
	DZ = OBTAIN/FA(XORIG),8
	DCX = ASSIGN/ABS(DX)
	DCY = ASSIGN/ABS(DY)
	DCZ = ASSIGN/ABS(DZ)
	BARDIR = ASSIGN/MX(DCX,DCY,DCZ)
	BARAXIS = ASSIGN/'非 常规角'
	IF/(BARDIR .GT. 0.95)
	   IF/(DCX .GT. 0.95)
	      BARAXIS = ASSIGN/'X轴'
	   ENDIF
	   IF/(DCY .GT. 0.95)
	      BARAXIS = ASSIGN/'Y轴'
	   ENDIF
	   IF/(DCZ .GT. 0.95)
	      BARAXIS = ASSIGN/'Z轴'
	   ENDIF
	ELSE
	  IF/(BARDIR .LT. 0.72) .AND. (BARDIR .GT. 0.69)
	   IF/(DCX.LE.0.1)
	      IF/(DY.LT.0)
	         BARAXIS = ASSIGN/'YZ直角__OB'
	      ELSE
	         BARAXIS = ASSIGN/'YZ直角__AC'
	      ENDIF
	   ENDIF
	   IF/(DCY.LE.0.1)
	      IF/(DX.LT.0)
	         BARAXIS = ASSIGN/'ZX直角__OB'
	      ELSE
	         BARAXIS = ASSIGN/'ZX直角__AC'
	      ENDIF
	   ENDIF
	   IF/(DCZ.LE.0.01)
	      IF/((DX + DY) .LT. 0.05)
	         BARAXIS = ASSIGN/'XY直角__AC'
	      ENDIF
	      IF/((DX + DY) .GT. 1.4) .OR. ((DX + DY) .LT. -1.4)
	         BARAXIS = ASSIGN/'XY直角__OB'
	      ENDIF
	   ENDIF
	  IF/(DCX .LT. 0.53) .AND. (DCX .GT. 0.47) .AND. (DCY .LT. 0.53) .AND. (DCY .GT. 0.47)
	      IF/(DX .LT. 0) .AND. (DY .LT. 0)
	      	BARAXIS = ASSIGN/'空间1'
	      ENDIF
	      IF/(DX .GT. 0) .AND. (DY .LT. 0)
	      	BARAXIS = ASSIGN/'空间2'
	      ENDIF
	      IF/(DX .GT. 0) .AND. (DY .GT. 0)
	      	BARAXIS = ASSIGN/'空间3'
	      ENDIF
	      IF/(DX .LT. 0) .AND. (DY .GT. 0)
	      	BARAXIS = ASSIGN/'空间4'
	      ENDIF
	      ENDIF
	  ENDIF 
	ENDIF
	
	WRITE/DID(DEFAULTSCREEN),''
	WRITE/DID(DEFAULTSCREEN),'    量块方向：',BARAXIS
	IF/(TXTOUTPUT .EQ. 1)
		WRITE/DID(GageBlock),''
		WRITE/DID(GageBlock),'    量块方向：',BARAXIS
	ENDIF
ENDIF	
  	
D(@CRDLABEL) = DATSET/FA(ZPLANE), ZDIR, ZORIG, FA(XLINE), XDIR, YORIG, FA(XORIG), XORIG
D(@CRDLABEL) = TRANS/ZORIG, -PRBR, YORIG, -PRBR, XORIG, -PRBR
ENDMAC

M(GAGECHECK) = MACRO/GHEIGHT, GWIDTH, GLENGTH, PRBR
DECL/LOCAL, REAL, XS, XE, ACTLENGTH,ERROR1,ERROR2,TOL1,MAXERROR,MINERROR,MAXIMUM,MINIMUM,AVERAG
DECL/LOCAL, CHAR, 20, SSEP,SSEP1,SSEP2,SSEP3,STESTDATE, STESTTIME,NY
DECL/LOCAL, INTGR, LPCOUNT

	DY = VALUE/GOTO, YAXIS
	IF/(DY .LT. HEIGHT)
	DX = VALUE/GOTO, XAXIS
	DZ = VALUE/GOTO, ZAXIS
	GOTO/DX, HEIGHT, DZ
	ENDIF
	
	F(PTS)=FEAT/POINT,CART,0 ,0, 0, 1, 0, 0
	F(PTE)=FEAT/POINT,CART,-GLENGTH ,0, 0,  -1, 0, 0
	STD = ASSIGN/0
	TOL1 = ASSIGN/(TOLERROR+GLENGTH/LL)/1000
	DO/LPCOUNT, 1,LPEND
		GOTO/5, HEIGHT, -(GWIDTH/2)
		MEAS/POINT,F(PTS), 1
		PTMEAS/CART, 0, -(GHEIGHT/8), -(GWIDTH/2), 1, 0, 0
		ENDMES
		GOTO/5, HEIGHT, -(GWIDTH/2)
		GOTO/-GLENGTH-8, HEIGHT, -(GWIDTH/2)
		MEAS/POINT,F(PTE), 1
		PTMEAS/CART, -GLENGTH, -(GHEIGHT/8), -(GWIDTH/2), -1, 0, 0
		ENDMES
		GOTO/-GLENGTH-3, HEIGHT, -(GWIDTH/2)
  		XS = OBTAIN/FA(PTS), 3
  		XE = OBTAIN/FA(PTE), 3
$$		输出系统时间
$$		STESTDATE = ASSIGN/SDATE()
$$		STESTTIME = ASSIGN/STIME()
$$		WRITE/DID(GageBlock), 'DATE : ', STESTDATE, '     TIME : ', STESTTIME 
$$		WRITE/DID(DEFAULTSCREEN),'DATE : ', STESTDATE, '     TIME : ', STESTTIME
  		ACTLENGTH = ASSIGN/(XS - XE) - (2.0 * PRBR)

  		ERROR1 = ASSIGN/ACTLENGTH-GLENGTH
		ERROR2 = ASSIGN/ABS(ERROR1)
		IF/(ERROR2.GT.TOL1) .AND. (HEIGHT .EQ. 44)
		DECL/COMMON,INTGR,III
		DO/III,1,INT((ABS(ERROR1)-TOL1)*1000+1)
		ERROR2 = ASSIGN/ABS(ERROR1)
		IF/(ERROR2 .EQ. ERROR1)
		ACTLENGTH = ASSIGN/ACTLENGTH - 0.001
		ERROR1 = ASSIGN/ERROR1 - 0.001
		ELSE
		ACTLENGTH = ASSIGN/ACTLENGTH + 0.001
		ERROR1 = ASSIGN/ERROR1 + 0.001
		ENDIF
		ERROR2 = ASSIGN/ABS(ERROR1)
		ENDDO
		ENDIF
        
		IF/(ERROR2.GT.TOL1)
		    NY = ASSIGN/'NG'
		ELSE
		    NY = ASSIGN/'OK'
		ENDIF 
		 
		TOL1 = ASSIGN/TOL1*1000
		ERROR1 = ASSIGN/ERROR1*1000 
		IF/(LPCOUNT.EQ.1)
		  MINERROR = ASSIGN/ERROR1		
		  MAXERROR = ASSIGN/ERROR1
		  AVERAG = ASSIGN/ERROR1/1000
		  WRITE/DID(DEFAULTSCREEN),''
		  WRITE/DID(DEFAULTSCREEN),'      ','序号 ','            ','理论值','              ','实测值   ','          ','示值误差(u)','            ','允许误差(u)','          ','测试结论'
          IF/(TXTOUTPUT .EQ. 1)
		  	WRITE/DID(GageBlock),'      ','序号 ','            ','理论值','              ','实测值   ','          ','示值误差(u)','            ','允许误差(u)','          ','测试结论'
		  ENDIF
          
          SSEP1 = ASSIGN/'       '
		  SSEP2 = ASSIGN/'            ' 
		  SSEP3 = ASSIGN/'                     '
		ENDIF
		WRITE/DID(DEFAULTSCREEN),'      ',LPCOUNT:2:2,'           ',GLENGTH:11:5,SSEP1,ACTLENGTH:11:5,SSEP2,ERROR1:6:2,SSEP3,TOL1:4:2,SSEP3,NY
		IF/(TXTOUTPUT .EQ. 1)
			WRITE/DID(GageBlock),'      ',LPCOUNT:2:2,'           ',GLENGTH:11:5,SSEP1,ACTLENGTH:11:5,SSEP2,ERROR1:6:2,SSEP3,TOL1:4:2,SSEP3,NY
		ENDIF
		TOL1 = ASSIGN/TOL1/1000
		IF/(ERROR1 .LT. MINERROR)
		MINERROR = ASSIGN/ERROR1
		ENDIF
		IF/(ERROR1 .GT. MAXERROR)
		  MAXERROR = ASSIGN/ERROR1
		ENDIF
		IF/(LPCOUNT.GT.1)
		AVERAG = ASSIGN/ERROR1/1000 + AVERAG
        ENDIF
    	KNPTR1 = ASSIGN/MAXERROR-MINERROR
	GOTO/5, HEIGHT, -(GWIDTH/2)
	ENDDO

IF/(MAXERROR+MINERROR.GT.0)
MAXIMUM = ASSIGN/MAXERROR
ELSE
MINIMUM = ASSIGN/MAXERROR
ENDIF
AVERAG  = ASSIGN/AVERAG/LPEND+GLENGTH
WRITE/DID(DEFAULTSCREEN),'     ','实测平均值:    ', AVERAG:5:5
WRITE/DID(DEFAULTSCREEN),'     ','重复性误差:    ', KNPTR1:2:2
IF/(TXTOUTPUT .EQ. 1)
WRITE/DID(GageBlock),'     ','实测平均值:    ', AVERAG:5:5
WRITE/DID(GageBlock),'     ','重复性误差:    ', KNPTR1:2:2
ENDIF
ENDMAC

$$DECL/LOCAL, CHAR, 20,STESTDATE, STESTTIME
$$		输出系统时间
$$		STESTDATE = ASSIGN/SDATE()
$$		STESTTIME = ASSIGN/STIME()
$$		WRITE/DID(GageBlock), 'DATE : ', STESTDATE, '     TIME : ', STESTTIME 
$$		WRITE/DID(DEFAULTSCREEN),'DATE : ', STESTDATE, '     TIME : ', STESTTIME

IF/(ANS .EQ. 'Y')
CRDVCE = OBTAIN/D(GAGG1CRD),9
RECALL/D(MCS)
PROBVCE = OBTAIN/SS(PROB),6
CRDVCE =ASSIGN/NINT(CRDVCE * 100)
PROBVCE =ASSIGN/NINT(PROBVCE * -100)

IF/(CRDVCE .NE. PROBVCE)
TEXT/OPER, '请确认探头角度与当前量块是否对应'
ENDIF

ENDIF



$$整组量块的循环次数
LOOP = ASSIGN/1
(BARLOOP)


$$《量块1》
ZP = ASSIGN/ZGAP[1]
XP = ASSIGN/XGAP[1]
BL = ASSIGN/BLENGTH[1]
CALL/M(GAGECRDSETUP), (GAGE1CRD), XP, ZP, GAGEHEIGHT, GAGEWIDTH, BL, ENDCLEAR, DR_PRBRAD
CALL/M(GAGECHECK), GAGEHEIGHT, GAGEWIDTH, BL, DR_PRBRAD

$$《量块2》
ZP = ASSIGN/ZGAP[2]
XP = ASSIGN/-XGAP[2]
BL = ASSIGN/BLENGTH[2]
CALL/M(GAGECRDSETUP), (GAGE2CRD), XP, ZP, GAGEHEIGHT, GAGEWIDTH, BL, ENDCLEAR, DR_PRBRAD
CALL/M(GAGECHECK), GAGEHEIGHT, GAGEWIDTH, BL, DR_PRBRAD

$$《量块3》
ZP = ASSIGN/ZGAP[3]
XP = ASSIGN/-XGAP[3]
BL = ASSIGN/BLENGTH[3]
CALL/M(GAGECRDSETUP), (GAGE3CRD), XP, ZP, GAGEHEIGHT, GAGEWIDTH, BL, ENDCLEAR, DR_PRBRAD
CALL/M(GAGECHECK), GAGEHEIGHT, GAGEWIDTH, BL, DR_PRBRAD

$$《量块4》
ZP = ASSIGN/ZGAP[4]
XP = ASSIGN/-XGAP[4]
BL = ASSIGN/BLENGTH[4]
CALL/M(GAGECRDSETUP), (GAGE4CRD), XP, ZP, GAGEHEIGHT, GAGEWIDTH, BL, ENDCLEAR, DR_PRBRAD
CALL/M(GAGECHECK), GAGEHEIGHT, GAGEWIDTH, BL, DR_PRBRAD

$$《量块5》
ZP = ASSIGN/ZGAP[5]
XP = ASSIGN/-XGAP[5]
BL = ASSIGN/BLENGTH[5]
CALL/M(GAGECRDSETUP), (GAGE5CRD), XP, ZP, GAGEHEIGHT, GAGEWIDTH, BL, ENDCLEAR, DR_PRBRAD
CALL/M(GAGECHECK), GAGEHEIGHT, GAGEWIDTH, BL, DR_PRBRAD



LOOP = ASSIGN/LOOP - 1
IF/(LOOP .LT. 1)
JUMPTO/(BARLOOP)
ENDIF


标签：ERROR1,RationalDMIS2023,GOTO,2023,HEIGHT,FA,ENDIF,量块,ASSIGN
From： https://blog.51cto.com/u_14941238/7721329

相关文章

  • RationalDMIS2022轴类零件检测2023
    $$/*HeaderDMISMN/'Createdby[山涧果子]on星期二,五月16,2023',4.0UNITS/MM,ANGDEC,MMPSWKPLAN/XYPLANPRCOMP/ONTECOMP/ONFLY/1.0000MODE/MANSNSET/APPRCH,3.0000SNSET/RETRCT,3.0000SNSET/DEPTH,0.0000SNSET/SEARCH,10.0000SNSET/CLRSRF,25.00......
  • 2023国庆节放假通知
    喜迎国庆放假通知公司相关各部门:国庆来临之际，根据国家有关规定，现将2023年国庆放假事项通知如下：1.9月29至10月6日放假调休，共8天。10月7日上班，10月8日上班。2.各部门接通知后，妥善安排好值班工作，并将各部门值班表于2023年9月28日下午18;00以前报公司办公室。2023年9月6日      ......
  • 2023.10.5
    A记\(\displaystylef(i)=\oplus_{d|i}d\)，求\(\displaystyle\oplus_{i=1}^{n}f(i)\).\(n\le10^{14}\).考虑一个数是否出现计数次，对\(\lfloor\frac{n}{x}\rfloor\)整除分块，查询区间异或和即可。点击查看代码#include<bits/stdc++.h>#definelllonglongusingnames......
  • CSP 2023
    以下是我的CSP2023时间线2023.9.1522:10比赛前一天，有点紧张2023.9.168:50到达普及组考场2023.9.1611:30考试结束我的CSP-J答案：BDAACBCADDABBADTTTABTFTCBDTTTBDCBACBDABABB2023.9.1613:32CSP-J:估分为90分使用https://oj.youdao.com/csp......
  • 2023.10.5——每日总结
    学习所花时间（包括上课）：0h代码量（行）：0行博客量（篇）：1篇今天，上午学习+休息，下午学习+休息；我了解到的知识点：1.Maven；2.SpringBoot；明日计划：学习+休息......
  • 74th 2023/10/5 模拟赛总结56
    T1看完题目，看到n<=9的限制，心头一紧一个词汇浮现于心：BruceForces暴力+记忆化，\(O(能过)\)但赛时并没有这样打，而是选择了往DP方面思考因为真的没想到能过然后DP呢，又不清楚该如何存一列的状态就匆匆暴力后离去考虑状压DP保留有用状态关键点：\(k=\min(k,n-k)\)可以参考\(C^k......
  • 73rd 2023/10/4 模拟赛总结55&广义串并联图
    这次的比赛成绩并不令人失望，因为早有准备很用心去打的一场比赛，T1T2一开始在看题目时感觉可以很容易切掉T1感觉太简单了，就再看了一遍又一遍T2动手打的时候，感觉T1没那么简单，就在想了一下，想出来了正解，但给的第三个大数据总过不了然后就先放了一下T1，去打T2，因为感觉T2很简单，而且思......
  • 72ed 2023/8/25 点分治学习笔记
    起因&介绍8月22号的T3是道黑，但思路却不算太难，就去打了这是第一次接触点分治，其实之前也有过一道点分治题，叫阴阳，但当时没去改，就一拖拖了半年才学点分治类似于树形DP，但在一些地方上处理有不同就比如在跑过根结点（1），进入处理它的子树时，会将其他的一部分视作没有（emmm大概这个意思，子树......
  • 2023-2024-1 20231415吴昕洋 《计算机基础与程序设计》第一周学习总结
    这个作业属于哪个课程2023-2024-1-计算机基础与程序设计这个作业要求是什么2023-2024-1-计算机基础与程序设计第一周作业这个作业的目标简单浏览《计算机概论》，提出疑问，并尝试解决问题作业正文https://i.cnblogs.com/posts/edit教材内容·学习总结  ......
  • 2023年React Native vs Flutter，究竟谁能更胜一筹？
    前言大约两年前，当时我对Flutter还有些陌生，对它给予了很高的评价，但也对ReactNative表示了一些敬意。我对ReactNative有更多的经验，并且喜欢（并且仍然喜欢）它的WebOG，ReactJS。差不多两年后，我会说我已经变得不那么公正了。长话短说，我觉得Flutter绝对是更好的移动框架。Flutter......

赞助商

阅读排行

网站主页关于我们联系我们网站地图

本网站内容转载自其他媒体，侵权联系[admin##ips99.com]。

Copyright © 2020-2023 IPS99 版权所有 IPS99